1.

DETERMINATION THE OPTIMAL CUTTING CONDITIONS AFFECTING THE SURFACE ROUGHNESS USING TAGUCHI METHOD IN TURNING (AL-12%SI) BY CARBIDE TOOL

Volume 13, Issue 2, June 2013, Pages 320-332
Hussam Lefta Alwan
2.

Determining the Effect of Process Parameters on Surface Roughness in two Point Incremental Sheet Metal Forming Process using the Taguchi Method

Volume 33, 7A, July 2015, Pages 1569-1582
Harith Yarub Maan
3.

Effect of Powder Concentration in PMEDM on Machining Performance for Different Die steel Types

Volume 33, 9A, December 2015, Pages 2174-2186
Maan Aabid Tawfiq; Azzam Sabah Hameed
4.

Erosion Wear Behavior of Natural and Industrial Material for Polymer Matrix Composite by Using Taguchi Analysis

Volume 38, 7A, July 2020, Pages 1016-1025
Marwa S. Atallah
5.

Estimation of Cutting Tool Wear in Turning using Taguchi Method Depending on Weight of the Removed Tool Metal

Volume 32, 1A, January 2014, Pages 24-33
Hussam Lefta Alwan; Baraa M.H. Albaghdadi; Mohanned M. H. AL-Khafaji; Asaad Ali Abbas
6.

Humidification Effect on the Performance and Emissions of (DI) Diesel Engine Running on Diesel Fuel with Biodiesel Blended Nano Additives

Volume 39, 5A, May 2021, Pages 790-803
Hussein Jumaa; Mahmoud A. Mashkour
7.

INFLUENCES AND OPTIMIZATION OF CNC TURNING MACHINING PARAMETERS

Volume 9, Issue 2, June 2016, Pages 200-210
Shukry H. Aghdeab; Baqer Ayad Ahmed; Mohammed Sattar Jabbar; Asaad Ali Abbas
8.

Investigating the Impact of Process Parameters on Thinning and Formability in Aluminum Alloy AA 1050 Incremental Sheet Metal Forming

Volume 41, Issue 12, December 2023, Pages 1653-1659
Safaa K. Ghazi; Aqeel S. Bedana; Maher Y. Salloom
9.

Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques

Volume 10, Issue 1, May 2019, Pages 83-88
Aseel J. Haleel; Hind H. Abdulridha; Ahmed A. Al-duroobi
10.

Optimization Corrosion Protection Parameters of steel pipeline By Using Taguchi Experimental Design

Volume 34, 4A, April 2016, Pages 754-761
Naser Korde Zedin; Muhammed A.Mahdi; Ruaa Abd Al Kaream Salman
11.

Optimization of Cyclic Oxidation Parameters in Steel-T21 for Aluminization Coating Using Taguchi-ANOVA analysis by MINITAB13

Volume 27, Issue 12, September 2009, Pages 2367-2384
Abbas Khammas Hussein
12.

Optimization of Design Parameters for Leaf Spring by Taguchi Technique

Volume 12, Issue 3, September 2017, Pages 148-164
Asst. Prof Dr. Mohammed M. Hamadi; Haider Sami Salman
13.

Optimization of Dry Sliding Wear Process Parameters for Al-Mg-Si Hybrid Composites Using Taguchi Method

Volume 36, 7A, July 2018, Pages 812-822
Israa A. Alkadir; Hanan K. Azeez
14.

Optimization of mechanical and biocompatible properties of ZnOs-fiber membranes

Articles in Press, Corrected Proof , Available Online from 07 April 2024
Dalia M. Jomaa; Abbas Kh. Hussein; Jamal J. Dawood
15.

Optimization of MRR and Surface Roughness for 7024 AL-alloy in EDM Process

Volume 35, 5A, May 2017, Pages 546-553
M.M. Abdulrazaq; S.K. Ghazi
16.

Optimization Process of Double Spots Welding of High Strength Steel Using in the Automotive Industry

Volume 41, Issue 1, January 2023, Pages 110-120
Hayder H. Khaleel; Ibtihal A. Mahmood; Fuad Khoshnaw
17.

Optimization Using Taguchi Method for Physical and Mechanical Properties of Bio Mimicking Polymeric Matrix Composite for Orthodontic Application

Volume 37, 5A, May 2019, Pages 181-187
Jenan S. Kashan
18.

Optimizing Coating Process Parameters by Using Taguchi Experimental Design to Increasing Wear Resistance of Steel CK50

Volume 32, Issue 12, November 2014, Pages 2862-2873
Mouhamed M. Hamadi; Amjad B. Abdulghafour; Haider. N. Ugla
19.

Optimizing Overcut Parameter of Micro-Holes Machining by EDM Using Taguchi Method

Volume 32, Issue 2, February 2014, Pages 298-304
Laith A. Mohammed; Shukry H. Aghdeab
20.

Parametric Study on Buckling Behavior of Aluminum Alloy Thin-Walled Lipped Channel Beam with Perforations Subjected to Combined Loading

Volume 39, 1A, January 2021, Pages 89-103
Dalya S. Khazaal; Hussein M. AL-Khafaji; Imad A. Abdulsahib
21.

Prediction of Bead Width In Submerged ArcWelding of Low Carbon Steel (AISI 1005)

Volume 33, 2A, February 2015, Pages 451-462
Husham Jawad Kadhim; Ahmed Ali Akbar Akbar
22.

Prediction of Surface Roughness and Material Removal Rate in Electrochemical Machining Using Taguchi Method

Volume 12, Issue 4, December 2016, Pages 72-80
Abbas Fadhil Ibrahim
23.

Prediction the Effect of Cutting Parameters on Surface Roughness Using Taguchi Method

Volume 31, Issue 17, October 2013, Pages 3334-3342
Laith A. Mohammed; Ahmed A. Duroobi
24.

Study the Effect of Cutting Parameters of Abrasive Water Jet Process on Aluminum Alloy 5083

Volume 13, Issue 2, November 2022, Pages 99-105
Safaa Kadhim Ghazi; mostafa adel; Alaa Hassan Shabeeb
25.

STUDY THE OPTIMAL CUTTING CONDITIONS AFFECTING THE COPPER SURFACE ROUGHNESS BY TAGUCHI TECHNIQUE

Volume 13, Issue 4, December 2013, Pages 723-733
Baraa Mohsen Hossien Albaghdadi
First Page Previous Page 1 2 Next Page Last Page


Journal Management System. Powered by ejournalplus.com