Optimization Using Taguchi Method for Physical and Mechanical Properties of Bio Mimicking Polymeric Matrix Composite for Orthodontic Application | ||
Engineering and Technology Journal | ||
Article 5, Volume 37, 5A, May 2019, Pages 181-187 PDF (884.96 K) | ||
Document Type: Research Paper | ||
DOI: 10.30684/etj.37.5A.5 | ||
Author | ||
Jenan S. Kashan | ||
Biomedical Engineering Department,University ofTechnology, | ||
Abstract | ||
This work take in consideration the application of Taguchi optimization methodology in optimizing the parameters for processing (composition, compounding pressure) and their effects on the output physical (Density and true porosity) properties and mechanical(fracture strength and microhardness) properties for the Nano HA,Al2O3 fillers reinforced HDPE hybrid composite material for orthodontic application. An orthogonal array of the Taguchi approach was used to analyses the effect of the processing parameters on the physical and mechanical properties. On the other hand, the surface roughness and particle size distribution were also calculated to study their effect on the output properties. The result shows that the Taguchi approach can determine the best combination of processing parameters that can provide the optimal physical and mechanical conditions, which are the optimum values (the optimum composition was15HA/ 5Al2O3/80HDPE, and optimum compounding pressure was102 MPa. | ||
Keywords | ||
Taguchi method; physical Properties; hybrid biocomposite; Mechanical properties | ||
References | ||
[1] J. Keating, M.McQueen “Substitutes for autologous bone graft in orthopedic trauma,” J Bone Joint Surg Br, 82, 3-8, 2001. [2] A.Chau, R. Mobbs “Bone graft substitutes in anterior cervical discectomy and fusion,” Eur Spine J, 18, 449-64, 2009. [3] K. Kaveh, R. Ibrahim, M. Bakar, T. Ibrahim, “Bone grafting and bone graft substitutes,” J Anim Vet Adv, 9, 1055-67, 2010. [4] R. Murugan, S.Ramakrishna “Bioactive nanomaterials in bone grafting and tissue engineering,” In: Handbook of nanostructured biomaterials and their applications in nanobiotechnology, Nalwa HS (Ed.); American Scientific Publishers: Stevenson Ranch USA, 2, 141-8, 2005. [5] J. Tazaki, M.Murata, T. Yuasa, T. Akazawa, K. Ito, J. Hino, “Autograft of human tooth and demineralized dentin matrices for bone augmentation,” J Ceram Soc Jpn, 118, 442-5, 2010. [6] J. Conway, “Autograft and nonunions: morbidity with intramedullary bone graft versus iliac crest bone graft,” Orthop Clin North Am, 41, 75-84, 2010. [7] E. Keller, W.Triplett “Iliac crest bone grafting: review of 160 consecutive cases,” J Oral Maxillofac Surg, 45, 11- 4, 1987. [8] A.D. Thamir, J.S. Kashan, J.T.Alhaidary, “Effect of Particle Size on the Physical and Mechanical Properties of Nano HA/HDPE Bio-Composite for Synthetic Bone Substitute,” Eng. & Tech. Journal, Vol. 32, Part (A), No.2, 2014. [9] E. Tolba, B.M. Abd-Elhady, B. Elkholy, H. Elkady, “Biomimetic Synthesis of Guided-Tissue Regeneration Hydroxyapatite/Polyvinl Alcohol Nanocomposite Scaffolds: Influence of Alignate on Mechanical and Biological Properties,” J. Americ. Scie, 6,196, 2010. [10] M. Wang, W. Bonfield, “Chemically coupled hydroxyapatite- polyethylene composites: structure and properties,” J. Biomater, 22, 1311, 2001. [11] R.A. Sousa, R.L. Reis, A.M. Cunha, M.J. Bevies, “Coupling of HDPE/hydroxyapatite Composite by Silanebased Methodologies,” J. Mater. Sci. Mater. In Medicine, 14, 475, 2003. [12] R. L. Reis, A. M. Cunha, M.J. Oliveira, A.R. Campos, M.J. Bevis, “Relationship between processing and mechanical properties of injection molded high molecular mass polyethylene + hydroxyapatite composites,” J. Mat Res Innovat ,4, 263, 2001. [13] S. Kangwantrakool, “Preparation of HydroxyapatitePolyethylene Biocomposites Using HA-nanoparticles by Mechanically-Coating Method,” CMU Journal Special Issue on Nanotechnology, 4, 95, 2005. [14] M. Haneef, J. Rahman, M. Yunus, S. Zameer, S. Patil, T. Yezdani, “Hybrid Polymer Matrix Composites for Biomedical Applications,” IJMER, 3:2, pp-970-979, 2013. [15] A. Tathe, M. Ghodke, A. Pratima, A. Nikalje, “Brief review on biomaterials and their applications,” International Journal of Pharmacy and Pharmaceutical Sciences, Volume 2, Suppl 4 , pp 19-23, 2010. [16] J. Black, G. Hasting “Handbook of biomaterials Properties,” London, UK: Chapman Hall, 1998. [17] E. Tolba, B.M. Abd-Elhady, B. Elkholy, H. Elkady, “Biomimetic Synthesis of Guided-Tissue Regeneration Hydroxyapatite/Polyvinl Alcohol Nanocomposite Scaffolds, Influence of Alignate on Mechanical and Biological Properties,” J. Americ. Scie, 6,196, 2010. [18] AccuPyc 1330 Pycnometer Operator’s Manual V3.03, Micromeritics Instrument Corporation, 2001. [19] L. WANG, P. Henrique P. D’alipino, L.G. Lopes, J.C. Perira, “Mechanical Properties of Dental Restorative Materials: Relative Contribution of Laboratory tests, J. Appl. Oral Sci, 11,162, 2003. [20] A.T. Procopio, A. Zavaliangos, J.C. Cunningham “Analysis of the diametrical compression test and the applicability to plastically deforming materials,” J. Mater. Sci., 38, 3629, 2003. [21] www.malvern.com, Mastersizer Manual, Malvern Instruments Limited Grovewood Road, Malvern, Worcestershire, UK, WR14 1XZ. [22] S.S. Mahapatra, A. Patnaik, “Study on mechanical and erosion wear behavior of hybrid composites using Taguchi experimental design,” Mater. Des. 30, 2791–2801, 2009. [23] P. Ross, “Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design,” McGraw-Hill, New York, 1998. [24] T. Thamaraiselvi, S. Rajeswari, “Biological Evaluation of Bioceramic Materials - A Review,” Trends Biomater. Artif. Organs, 18, 1, pp 9-17, 2004. [25] V. Sergey “Biocomposites and hybrid biomaterials based on calcium orthophosphates,” Biomatter 1, 1, 3-56, 2011. [26] T.Kokubo, H. Kim, M. Kawashita “Novel bioactive materials with different mechanical properties,” Biomaterials, 24, 2161-75, 2003. [27] J.S. Kashan, A. Jha, A.D. Thamir, J.T. Al-Haidar, “A kinetic analysis of the melting HA/Y-PSZ/HDPE nano compositefor hard tissue materials,”Journal of King Saud University – Engineering Sciences, 30, 286–29, 2018. [28] J.S. Kashan, H. Jameel, “The Development of Biomimetic Nano CaCO3/ PPBio Composites as Bone Repair Materials-Optimal Thermal Properties Evaluation,” J. of Babylon University/Engineering Sciences, No. 5, Vol. 25, 1562-1571, 2017. [29] J.S. Kashan, A.D.Thamir, J.T.Al-Haidary, “Effect of Particle Size on the Physical and Mechanical Properties of Nano HA/HDPE Bio-Composite for Synthetic Bone Substitute,” Eng. & Tech. Journal, Vol.32, Part (A), No.2, 286-297, 2014. | ||
Statistics Article View: 209 PDF Download: 115 |