Experimental and Numerical Study of Spur Gears With Lightening Holes | ||
| Engineering and Technology Journal | ||
| Article 2, Volume 41, Issue 7, July 2023, Pages 904-914 PDF (1.7 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.30684/etj.2023.134713.1246 | ||
| Authors | ||
| Almurtadha A. Ahmed* ; Ali R. Hassan | ||
| Mechanical Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq. | ||
| Abstract | ||
| The gear is a very important component of power transmission in a flying vehicle and rotating mechanisms etc... In this paper, the dynamic effect and stresses generated as a result of the mash gear will be studied by designing light-weight gears by making lightening holes of multiple diameters (14, 19, 24 and 29) mm at serval speeds (500,1000,1500,2000) that represent the variables parameter with a fixed dimension between the center of the holes and the center of rotation of the gear 43 mm and the number of 5 holes for gears with reduction ratios of gear mass ranging from (3.6%-15%) that represent the constant parameter. The 5-hole gear is better with a hole diameter (0.1085 * Dp) which is equivalent to 19 mm in this research with respect to the gear diameter of 175 mm. Where the maximum value of stress concentration in the root of the tooth reached 0.655 M.N/m^2. | ||
Highlights | ||
| ||
| Keywords | ||
| Natural frequency; Circular-section holes; Modul; Spur Gear; Lightening gear; Rim holes | ||
| References | ||
|
[1] Z.G. Chen, and Y.M. Shao, Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack. Mech. Mach. Theory. 62 (2013) 63-74 . https://doi.org/10.1016/j.mechmachtheory.2012.10.012 [2] Nidal H. Abu-Hamdeh and Mohammad A. Alharthy, A Study on the Influence of using Stress Relieving Feature on Reducing the Root Fillet Stress in Spur Gear, ResearchGate, ISSN 2227-4588, Interlaken, Switzerland, 2014. [3] M. Kumar, A. S. Rathore, and Amalendu Biswas ,Stress Analysis of an Asymmetric Spur Gear Tooth with Series of Circular Hole using Finite Element Method, Guru Nanak Publications, India,1 (2018) 21-25. [4] S. Mahendran, K. M. Eazhil, and L. Senthil Kumar, Design and Analysis of Composite Spur Gear, Research and Scientific Innovation Society RSIS International, 1 (2014) 42-53. [5] Emre Ozturk and Zeynep Sonmez, “Optimization of Lightening Hole on A Spur Gear of An Aircraft Motor” Ankara, Turkey 2019. https://doi.AIAC-2019-155 [6] R. D. Dhananjay and S. A.Quadr, Mass Reduction of Involute Spur Gear under Static Loading. Am. J. Mech. Eng. Autom. 2 (2015) 40-43 [7] Özek, F. “Optimum Ağırlıklı Düz Dişli Çark Tasarımı ve Gerilme Analizi” T.C.Firat Ünvers Tes Fenbl Mler Enst Tüsü , 2007. https://doi.20.500.12812/417544 [8] A.R. Hassan, G. Thanigaiyarasu, and V. Ramamurti, Effect of Natural Frequency and Rotational Speed on Dynamic Stress in Spur Gear, World Acad .Sci. Eng .Technol .2 (2008) 12-20. https://doi.10.5281/zenodo.1330313. [9] X.M. Bai et al., Investigation of particle damping mechanism via particle dynamics simulations. Granular Matter.11 (2009) 417-429. https://doi.org/10.1007/s10035-009-0150-6 [10] S. Oda, K. Miyachika, and T. Sayama, Effects Of Rim and Web Thicknesses on Bending Fatigue Strength of Internal Gear, Bulletin of JSME, 29 (1986) 586-592. https://doi.10.1299/jsme1958.29.586. [11] J. Zhou and S. Wenlei, Vibration and Noise Radiation Characteristics of Gear Transmission System, Xinjiang University, China, 33 (2014) 485–502.https://doi.10.1260/0263-0923.33.4.485 [12] Dresig .H and F. Holzweißig, Dynamics of Machinery - Theory and Applications, Springer-Verlag Berlin Heidelberg, 2010. | ||
|
Statistics Article View: 160 PDF Download: 306 |
||