- Grujicic, G. Arakere, B. Pandurangan, V. Sellappan, A. Vallejo, M. Ozen, Multidisciplinary design optimization for glass-fiber epoxy-matrix composite 5 MW horizontal-axis wind-turbine blades, J. Mater .Eng. Perform., 19 (2010) 1116–1127. http://dx.doi.org/10.1007/s11665-010-9596-2
- Brown, S. Müller, Z. Dobrotkova, Renewable energy: Markets and prospects by technology, IEA information paper, 2011.
- Ellabban, H. Abu-Rub, F. Blaabjerg, Renewable energy resources: Current status, future prospects and their enabling technology, Renew. Sustain. Energy Rev., 39 (2014)748–764. http://dx.doi.org/10.1016/j.rser.2014.07.113
- G. Olabi et al, Wind Energy Contribution to the Sustainable Development Goals: Case Study on London Array, Sustainability, 15 (2023) 4641- 2023. https://doi.org/10.3390/su15054641
- Burton, N. Jenkins, D. Sharpe, E. Bossanyi, Wind energy handbook. John Wiley & Sons, 2011. https://doi.org/10.1002/9781119992714
- A. Aladejare, Renewable Energy and Ecological Sustainability in Africa: Does Foreign Debt and Financial Globalisation Matter, 2023. https://doi.org/10.21203/rs.3.rs-2723366/v2
- Martinez , G. Iglesias, Global wind energy resources decline under climate change, Energy, 288 (2024)129765. https://doi.org/10.1016/j.energy.2023.129765
- Zouboulis, E. P. Koumoulos, A. Karatza, Wind Turbine Blade-Tip Optimization: A Systemic Computational Approach, Processes, 11(2023)1170, 2023. https://doi.org/10.3390/pr11041170
- Maheri, Multi-objective optimisation and integrated design of wind turbine blades using WTBM-ANSYS for high fidelity structural analysis, Renew. Energy, 145 (2020) 814–834. https://doi.org/10.1016/j.renene.2019.06.013
- Mishnaevsky, K. Branner, H. Petersen, J. Beauson, M. McGugan, B. Sørensen, Materials for wind turbine blades: An overview, Mater., 10 (2017)1285. https://doi.org/10.3390%2Fma10111285
- R. Kalagi, R. Patil, N. Nayak, Experimental study on mechanical properties of natural fiber reinforced polymer composite materials for wind turbine blades, Mater .Today. Proc., 5 (2018). 2588–2596. https://doi.org/10.1016/j.matpr.2017.11.043
- Jandyal, I. Chaturvedi, I. Wazir, A. Raina, M. Haq, 3D printing–A review of processes, materials and applications in industry 4.0, Sustainable Opera . Comp., 3 (2022) 33–42. https://doi.org/10.1016/j.susoc.2021.09.004
- Tofail, E. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, C. Charitidis, Additive manufacturing: scientific and technological challenges, market uptake and opportunities, Mater. today, 21 (2018) 22–37. https://doi.org/10.1016/j.mattod.2017.07.001
- Li, K. Wei, W. Yang, Q. Wang, Improving wind turbine blade based on multi-objective particle swarm optimization, Renew Energy, 161 (2020) 525–542. https://doi.org/10.1016/j.renene.2020.07.067
- Ngo, A. Kashani, G. Imbalzano, K. Nguyen, D. Hui, Additive manufacturing (3D printing): A review of materials, methods, applications and challenges, Compos B. Eng., 143 (2018)172–196. https://doi.org/10.1016/j.compositesb.2018.02.012
- Goh, S. Sing, W. Yeong, A review on machine learning in 3D printing: applications, potential, and challenges, Artif .Intell. Rev., 54 (2021) 63–94. https://doi.org/10.1007/s10462-020-09876-9
- Parandoush and D. Lin, “A review on additive manufacturing of polymer-fiber composites,” Compos Struct, vol. 182, pp. 36–53, 2017, doi: 10.1016/j.compstruct.2017.08.088.
- Zhu., Realization of circular economy of 3D printed plastics: A review, Polym., 13 (2021) 744. https://doi.org/10.3390/polym13050744
- Poole , R. Phillips, Rapid prototyping of small wind turbine blades using additive manufacturing, in 2015 pattern recognition association of South Africa and robotics and mechatronics int.conf., IEEE, (2015) 189–194. https://doi.org/10.1109/RoboMech.2015.7359521
- Kafle, E. Luis, R. Silwal, H. Pan, P. Shrestha, A. Bastola, 3D/4D Printing of polymers: Fused deposition modelling (FDM), selective laser sintering (SLS), and stereolithography (SLA), Polym. ., 13 (2021) 3101. https://doi.org/10.3390/polym1318 3101
- Sivamani, M. Nadarajan, R. Kameshwaran, C. Bhatt, M. Premkumar, V. Hariram, Analysis of cross axis wind turbine blades designed and manufactured by FDM based additive manufacturing, Mater .Today ., 33 (2020) 3504 –3509. https://doi.org/10.1016/j.matpr.2020.05.438
- L. Shashidhar, A. B. Basavaroodh, S. K. Shashir, A. D. Apsarraj, Design, Development and Testing of Model Wind Turbine Blades Using Additive, 4 (2017) 259–262.
- Arivalagan, R. Sappani, R. Čep, M. S. Kumar, Optimization and Experimental Investigation of 3D Printed Micro Wind Turbine Blade Made of PLA Material, Mater., 16 (2023) 2508. https://doi.org/10.3390/ma16062508
- Kumar , C. Krishnadas Nair, Current trends of additive manufacturing in the aerospace industry, Adv. Print. Addit. Manuf. Technol., (2017) 39–54. https://doi.org/10.1007/978-981-10-0812-2_4
- Ning, W. Cong, J. Qiu, J. Wei, S. Wang, Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling, Compos B Eng., 80 (2015) 369–378. https://doi.org/10.1016/j.compositesb.2015.06.013
- A. Ramírez-Elías, N. Damian-Escoto, K. Choo, M. A. Gómez-Martínez, A. Balvantín-García, and J. A. Diosdado-De la Peña, Structural Analysis of Carbon Fiber 3D-Printed Ribs for Small Wind Turbine Blades, Polymers, 14 (2022) 4925. https://doi.org/10.3390/polym14224925
- Kapranos, C. Carney, A. Pola, M. Jolly, Advanced Casting Methodologies: Investment Casting, Centrifugal Casting, Squeeze Casting, Metal Spinning, and Batch Casting, Comp. Mater. Proc., 5 (2014) 39–67. http://dx.doi.org/10.1016/B978-0-08-096532-1.00539-2
- Rahimizadeh, J. Kalman, K. Fayazbakhsh, L. Lessard, Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing, Compos B Eng., 175 (2019) 107101. https://doi.org/10.1016/j.compositesb.2019.107101
- Guerrero-Villar, E. Torres-Jimenez, R. Dorado-Vicente, J.I Jiménez-González,Development of vertical wind turbines via FDM prototypes, Procedia Eng., 132 (2015) 78–85. https://doi.org/10.1016/j.proeng.2015.12.482
- Post, B. Richardson, P. Lloyd, L. Love, S. Nolet, J. Hannan, Additive Manufacturing of Wind Turbine Molds, ORNL/TM-20 (2017).http://www.osti.gov/servlets/purl/1376487/
- M Aboushama, S Beyerlein, M Bednarz, Evaluation of Continuous Fiber Reinforcement Desktop 3D Printers,2020. http://dx.doi.org/10.13140/RG.2.2.16640.87040
- S. Carron, D. Snowberg, P. Murdy, S Hughes, Using Large-Scale Additive Manufacturing for Wind Turbine Blade Core Structures Using Large-Scale Additive Manufacturing for Wind Turbine Blade Core Structures, Technical Report, 2023.
- Murray, D. Snowberg, D. Berry, R. Beach, S. Rooney, D. Swan, Manufacturing a 9-meter thermoplastic composite wind turbine blade, National Renewable Energy Lab, Golden, CO (United States), 2017. https://doi.org/10.12783/asc2017/15166
- Gibson, I. dditive Manufacturing Technologies 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. springer publication, 2015.
- K. Mallick, Fiber-reinforced composites: materials, manufacturing, and design, CRC press, 2007. https://doi.org/10.1201/9781420005981
- C. Jacob et al., Technical advances in epoxy technology for wind turbine blade composite fabrication, Proc.tech. conf., 2009.
- NREL, Three-Dimensional Printing of Thermoplastic Blades Enables Thermal Welding, Improves Recyclability, 2021. https://www.nrel.gov/news/program/2021/manufacturing-next-generation-wind-turbines.html
- Joustra, B. Flipsen, R. Balkenende, Structural reuse of high end composite products: A design case study on wind turbine blades, Resour. Conserv. Recycl., 167 (2021)105393. https://doi.org/10.1016/j.resconrec.2020.105393
- Chiriță, P. Bere, R. RĂDOI, L. Dumitrescu, Aspects regarding the use of 3D printing technology and composite materials for testing and manufacturing vertical axis wind turbines, Mater. Plast., 56 (2019) 910-917. https://doi.org/10.37358/MP.19.4.5283
- Tong , C. Tong, Advanced Materials Enable Renewable Wind Energy Capture and Generation, Adv. Energy. Mater., (2019) 379– 444. http://dx.doi.org/10.1007/978-3-319-98002-7_6
- Mishnaevsky, Sustainable end-of-life management of wind turbine blades: Overview of current and coming solutions, Mater., 14 (2021) 1124. https://doi.org/10.3390/ma14051124
- Ferretti et al., Molds with advanced materials for carbon fiber manufacturing with 3D printing technology, Polym., 13 (2021) 3700. https://doi.org/10.3390/polym13213700
- Zhong, Processes for environmentally friendly and/or cost-effective manufacturing, Mater. Manuf. Proc., 36 (2021) 987–1009. https://doi.org/10.1080/10426914.2021.1885709
- Domnica, C. Ioan, T. Ionut, Structural optimization of composite from wind turbine blades with horizontal axis using finite element analysis, Proc. Technol., 22 (2016) 726–733. https://doi.org/10.1016/j.protcy.2016.01.031
- Maalawi , H. Negm, Optimal frequency design of wind turbine blades, J. Wind Eng. Ind. Aerody., 90 (2002) 961–986. https://doi.org/10.1016/S0167-6105(02)00214-3
- Song, Y. Ni, Z. Tan, Optimization design, modeling and dynamic analysis for composite wind turbine blade, Proc.Eng., 16 (2011) 369–375. https://doi.org/10.1016/j.proeng.2011.08.1097
- Yang, J. Chen, X. Pang, G. Chen, A new aero-structural optimization method for wind turbine blades used in low wind speed areas, Comp. Struct, 207 (2019) 446–459. https://doi.org/10.1016/j.compstruct.2018.09.050
- Chen ,C. Yung, Structural optimization of 3 MW wind turbine blades using a two-step procedure, Int. J. Simul. Multidisci. Des. Optim., 4 (2010) 159-165. https://doi.org/10.1051/ijsmdo/2010020
- Jureczko , M. Mrówka, Multiobjective Optimization of Composite Wind Turbine Blade, Mater., 15 (2022) 4649. https://doi.org/10.3390/ma15134649
- Andrew Ning, R. Damiani, and P. J. Moriarty, Objectives and Constraints for Wind Turbine Optimization, J. Sol. Energy Eng., 136 (2014) 12. https://doi.org/10.1115/1.4027693
- Chen, M. Song, X. Zhang, S. Wang, Wind turbine layout optimization with multiple hub height wind turbines using greedy algorithm, Renew. Energy, 96 (2016) 676–686. https://doi.org/10.1016/j.renene.2016.05.018
- Neto, E. Junior, S. Moreno, H. Ayala, V. Mariani, L. Coelho, Wind turbine blade geometry design based on multi-objective optimization using metaheuristics, Energy, 162 (2018) 645–658. https://doi.org/10.1016/j.energy.2018.07.186
- Xudong, W. Shen, W. Zhu, J. Sørensen, C. Jin, Shape optimization of wind turbine blades, Wind Energy: An Int. J.for Progress and Appl. in Wind Power Conv. Technol., 12 (2009) 781–803. https://doi.org/10.1002/we.335
- Maki, R. Sbragio, N. Vlahopoulos, System design of a wind turbine using a multi-level optimization approach, Renew .Energy, 43 (2012) 101–110. https://doi.org/10.1016/j.renene.2011.11.027
- Liao, X. Zhao, J. Xu, Blade layers optimization of wind turbines using FAST and improved PSO Algorithm, Renew Energy, 42 (2012) 227–233. https://doi.org/10.1016/j.renene.2011.08.011
- Bavanish , K. Thyagarajan, Optimization of power coefficient on a horizontal axis wind turbine using bem theory, Renew. Sustain. Energy. Rev., 26 (2013)169–182. https://doi.org/10.1016/j.rser.2013.05.009
- Chen, Q. Wang, W. Shen, X. Pang, S. Li, X. Guo, Structural optimization study of composite wind turbine blade, Mater.Design , 46 (2013) 247–255. https://doi.org/10.1016/j.matdes.2012.10.036
- Kusiak , H. Zheng, Optimization of wind turbine energy and power factor with an evolutionary computation algorithm, Energy, 35 (2010) 1324–1332. https://doi.org/10.1016/j.energy.2009.11.015
- Zhu, X. Cai, P. Pan, R. Gu, Optimization design of spar cap layup for wind turbine blade, Front. Struct. Civ. Eng., 6 (2012) 53–56. https://doi.org/10.1007/s11709-012-0147-9
- Muheisen, M. Yass, I. Irthiea, Enhancement of horizontal wind turbine blade performance using multiple airfoils sections and fences, J. University-Engi. Sci., 35 (2023) 69–81. https://doi.org/10.1016/j.jksues.2021.02.014
- Chehouri, R. Younes, A. Ilinca, J. Perron, Review of performance optimization techniques applied to wind turbines, Appl. Energy, 142 (2015) 361–388. https://doi.org/10.1016/j.apenergy.2014.12.043
- Barnes , E. Morozov, Structural optimisation of composite wind turbine blade structures with variations of internal geometry configuration, Compos .Struct., 152 (2016)158–167. https://doi.org/10.1016/j.compstruct.2016.05.013
- Yang, Geometry design optimization of a wind turbine blade considering effects on aerodynamic performance by linearization, Energies, 13 (2020) 2320. https://doi.org/10.3390/en13092320
- Kim et al., Compression and energy absorption characteristics of short fiber‐reinforced 2D composite lattices made by material extrusion, Eng.Repo., 5 (2023) 12701. https://doi.org/10.1002/eng2.12701
- Li, Study of site suitability assessment of regional wind resources development based on multi-criteria decision, Clean .Techn. Environ. Policy., 20 (2018) 1147–1166. https://doi.org/10.1007/s10098-018-1538-y
- Galvez, K. Olivar, F. Tolentino, L. Danao, B. Abuan, Finite Element Analysis of Different Infill Patterns for 3D Printed Tidal Turbine Blade, Sustain., 15 (2022) 713. https://doi.org/10.3390/su15010713
- Cabreira , R. Santana, Effect of infill pattern in Fused Filament Fabrication (FFF) 3D Printing on materials performance, Matér ., 25 (2020). https://doi.org/10.1590/s1517-707620200003.1126
- Mishra, P. Senthil, S. Adarsh, M. Anoop, An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts, Comp.Comm., 24 (2021) 100605. https://doi.org/10.1016/j.coco.2020.100605
- Tanveer, G. Mishra, S. Mishra, R. Sharma, Effect of infill pattern and infill density on mechanical behaviour of FDM 3D printed Parts-a current review, Mater .Today .Proc., 62 (2022) 100–108. https://doi.org/10.1016/j.matpr.2022.02.310
- Ç. bolat , B. ergene, an experimental effort on impact Properties of Polylactic Acid Samples Manufactured by Additive Manufacturing, Duzce University J. Sci. Technol., 11(2023) 998–1013. https://doi.org/10.29130/dubited.1075259
- Sharif, H. Khan, N. Bashir, W. Alam, Parametric optimization and evaluating mechanical properties of poly lactic acid proceed by FDM additive manufacturing, J. Mater. Manuf., 2 (2023) 11-20. https://doi.org/10.5281/zenodo.8020527
|