Hameed, N., Abdul-Hamead, A., Othman, F. (2024). Innovative self-healing concrete using polycarboxylate ether: a fused deposition modeling approach with 3D-printed polylactic acid vascular networks. Alustath, (), 1-14. doi: 10.30684/etj.2024.145499.1655
Noor A. Hameed; Alaa A. Abdul-Hamead; Farhad M. Othman. "Innovative self-healing concrete using polycarboxylate ether: a fused deposition modeling approach with 3D-printed polylactic acid vascular networks". Alustath, , , 2024, 1-14. doi: 10.30684/etj.2024.145499.1655
Hameed, N., Abdul-Hamead, A., Othman, F. (2024). 'Innovative self-healing concrete using polycarboxylate ether: a fused deposition modeling approach with 3D-printed polylactic acid vascular networks', Alustath, (), pp. 1-14. doi: 10.30684/etj.2024.145499.1655
Hameed, N., Abdul-Hamead, A., Othman, F. Innovative self-healing concrete using polycarboxylate ether: a fused deposition modeling approach with 3D-printed polylactic acid vascular networks. Alustath, 2024; (): 1-14. doi: 10.30684/etj.2024.145499.1655

Innovative self-healing concrete using polycarboxylate ether: a fused deposition modeling approach with 3D-printed polylactic acid vascular networks

Engineering and Technology Journal
Articles in Press, Corrected Proof, Available Online from 26 March 2024    PDF (1.63 M)
Document Type: Research Paper
DOI: 10.30684/etj.2024.145499.1655
Authors
Noor A. Hameed* ; Alaa A. Abdul-Hamead; Farhad M. Othman
Materials Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
Abstract
Concrete's fracture susceptibility is due to its limited tensile strength, which can lead to cracks. Steel reinforcement is added to designated areas to address this issue, but minuscule cracks can allow liquids and vapors to infiltrate the reinforcing material, causing corrosion. Self-healing concrete can resist corrosion by mending and sealing minor cracks. This study aims to determine if fused deposition modeling (FDM) can fabricate innovative vascular networks and tubes from polylactic acid (PLA) created by using three-dimensional (3D) printing methods, and its characteristics were contrasted with those of two- and one-dimensional (2D) networks.The dimensions of the internal and exterior diameters were 4 and 5.6 mm, respectively. The researchers used a planetary ball mill to apply an organic polycarboxylate ether liquid and fly ash nanopowder to all vascular architectures. The prefabricated tubes were then incorporated into a concrete beam to enable self-repairing capabilities. The water-to-cement ratio was 0.6%; the mixture was 1 part cement, 2.16 parts water, and 2.98 other ingredients. The self-healing properties were assessed using a four-point bending test. The developed pipes can produce self-healing concrete by introducing nano fly ash particles and low-viscosity healing solutions into the blood vessel network, enabling the concrete to undergo self-repair mechanisms. The specimen that had 3D treatment restored its strength to 95% at flexural recovery.The dimensions of the internal and exterior diameters were 4 and 5.6 mm, respectively. The researchers used a planetary ball mill to apply an organic polycarboxylate ether liquid and fly ash nanopowder to all types of vascular architectures. The prefabricated tubes were then incorporated into a concrete beam to enable self-repairing capabilities. The water-to-cement ratio was 0.6%, and the mixture was 1-part cement, 2.16 parts water, and 2.98 parts other ingredients. The self-healing properties were assessed using a four-point bending test. The developed pipes can be used in the production of self-healing concrete by introducing nano fly ash particles into the blood vessel network and low-viscosity healing solutions, enabling the concrete to undergo self-repair mechanisms. the specimen that had 3D treatment restored its strength to a level of 95% at flexural recovery.

Highlights
  • The 3D vascular to release healing materials at a specified crack
  • A pre-and post-healing study examined the microstructure of interior fissures
  • EDX analysis confirmed the consumption of Ca(OH)2 and the generation of C-S-H
  • Mechanical properties and durability were restored within 28 days after damage
Keywords
Polycarboxylate ether Self; healing concrete Nano fly ash powder Vascular tubes
References
  1. Formia, S. Terranova, P. Antonaci, N.M. Pugno, J.M. Tulliani, Setup of extruded cementitious hollow tubes as containing/releasing devices in self-healing systems, Materials, 8 (2015) 1897-1923. https://doi.org/10.3390/ma8041897
  2. Ahmad, DD. Burduhos-Nergis, M.M. Arbili, S.M. Alogla, A. Majdi, A.F. Deifalla, A review on failure modes and cracking behaviors of polypropylene fibers reinforced concrete, Buildings, 12 (2022) 1951. https://doi.org/10.3390/buildings12111951
  3. Šavija, H. Zhang, E. Schlangen, Influence of microencapsulated phase change material (PCM) addition on (micro) mechanical properties of cement paste, Materials, 10 (2017) 863. https://doi.org/10.3390/ma10080863
  4. L. Golewski, The phenomenon of cracking in cement concretes and reinforced concrete structures: the mechanism of cracks formation, causes of their initiation, types and places of occurrence, and methods of detection-a review, Buildings, 13 (2023) 765. https://doi.org/10.3390/buildings13030765
  5. Z. Dahesh, F.M. Othman, A.A. Abdul-Hamead, Improve Mass Concrete by Controlling the Crack Sealing Mechanism Using Microcapsules of Zinc Oxide, Mater. Sci. Forum, 1002 (2020) 541-550. http://dx.doi.org/10.4028/www.scientific.net/MSF.1002.541
  6. F. Huseien, K.W. Shah, A.R.M. Sam, Sustainability of nanomaterials based self-healing concrete: An all-inclusive insight, J. Build. Eng., 23 (2019) 155-171. https://doi.org/10.1016/j.jobe.2019.01.032
  7. Šavija, Smart crack control in concrete through use of phase change materials (PCMs): a review, Materials 11(5) (2018) 654. https://doi.org/10.3390/ma11050654
  8. Zhu, C. Wang, Y. Yang, Y. Wang, Hygro-thermal–mechanical coupling analysis for early shrinkage of cast in situ concrete slabs of composite beams: Theory and experiment, Constr. Build. Mater., 372 (2023) 130774. https://doi.org/10.1016/j.conbuildmat.2023.130774
  9. Roig-Flores, P. Serna, Concrete early-age crack closing by autogenous healing, Sustainability, 12 (2020) 4476. https://doi.org/10.3390/su12114476
  10. Wan, Y. Xu, Y. Zhang, S. He, B. Šavija, Mechanical properties and healing efficiency of 3D-printed ABS vascular based self-healing cementitious composite: Experiments and modelling, Eng. Fract. Mech., 267 (2022) 108471. https://doi.org/10.1016/j.engfracmech.2022.108471
  11. M. Meraz, N.J. Mim, M.T. Mehedi, B. Bhattacharya, M.R. Aftab, M.M. Billah, M.M. Meraz, Self-healing concrete: Fabrication, advancement, and effectiveness for long-term integrity of concrete infrastructures, Alex. Eng. J., 73 (2023) 665-694. https://doi.org/10.1016/j.aej.2023.05.008
  12. E. Chidiac, M.A. Reda, Performance Modeling of Spherical Capsules during Mixing of Self-Consolidating Concrete, Materials, 16 (2023) 2379. https://doi.org/10.3390/ma16062379
  13. Z. Dahesh, F.M. Othman, A.A. Abdul-Hamead, Improve Mass Concrete by Controlling the Crack Sealing Mechanism Using Microcapsules of Zinc Oxide, Mater. Sci. Forum, 1002 (2020) 541-550. http://dx.doi.org/10.4028/www.scientific.net/MSF.1002.541
  14. Selvarajoo, Characterisation of a vascular self-healing cementitious material system, School of Engineering, Cardiff University, 2020.
  15. Siahkouhi, X. Han, M. Wang, A. Manalo, G. Jing, Development and performance evaluation of self-healing concrete railway sleepers using different size PU tubes, Eng. Struct., 283 (2023) 115920.https://doi.org/10.1016/j.engstruct.2023.115920
  16. Selvarajoo, R. Davies, D. Gardner, B. Freeman, A. Jefferson, Characterisation of a vascular self-healing cementitious material system: Flow and curing properties, Constr. Build. Mater., 245 (2020) 118332. https://doi.org/10.1016/j.conbuildmat.2020.118332
  17. Wan, Y. Zhang, Y. Xu, B. Šavija, Self-healing cementitious composites with a hollow vascular network created using 3D-printed sacrificial templates, Eng. Struct., 289 (2023) 116282.https://doi.org/10.1016/j.engstruct.2023.116282
  18. Li, LR de Souza, C. Litina, A.E. Markaki, A. Al-Tabbaa, A novel biomimetic design of a 3D vascular structure for self-healing in cementitious materials using Murray's law, Mater. Des., 190 (2020) 108572. https://doi.org/10.1016/j.matdes.2020.108572
  19. Tsangouri, C. Van Loo, Y. Shields, N. De Belie, K. Van Tittelboom, D.G. Aggelis, Reservoir-vascular tubes network for self-healing concrete: performance analysis by acoustic emission, digital image correlation and ultrasound velocity, Appl. Sci., 12 (2022) 4821. https://doi.org/10.3390/app12104821
  20. Feng, H. Dong, R. Wang, Y. Su, A novel capsule by poly (ethylene glycol) granulation for self-healing concrete, Cem. Concr. Res., 133 (2020) 106053. https://doi.org/10.1016/j.cemconres.2020.106053
  21. Tonjam, M.M. Mathew, Comparative Performance of Few Self-Curing Agents on Workability and Strength of Self-Curing Concrete, Int. J. Mech. Eng., 7 (2022) 4789-4796.
  22. Feng, X.Y. Yap, J. Gao, C.L. Gan, R. Wang, S. Qian, Rapid self-sealing of macro cracks of cementitious composites by in-situ alginate crosslinking, Cem. Concr. Res., 165 (2023) 107074. https://doi.org/10.1016/j.cemconres.2022.107074
  23. Torkan, S.M. Hejazi, S.M. Abtahi, M. Shayannejad, Design and fabrication of fibrous media to facilitate autogenous smart self-healing properties in cracked-cementitious structures using polyethylene glycol (PEG) and silicon dioxide nanoparticles, Constr. Build. Mater., 407 (2023) 133518. https://doi.org/10.1016/j.conbuildmat.2023.133518
  24. Wu, X. Hu, Q. Zhang, Y. Zhao, Y. Feng, H. Yuan, Synergistic effect of OH-rich fibers and mineral capsules on the self-healing properties of cement mortar, Cem. Concr. Compos., 137 (2023) 104913. https://doi.org/10.1016/j.cemconcomp.2022.104913
  25. Sha, M. Wang, C. Shi, Y. Xiao, Influence of the structures of polycarboxylate superplasticizer on its performance in cement-based materials-A review, Constr. Build. Mater., 233 (2020) 117257. https://doi.org/10.1016/j.conbuildmat.2019.117257
  26. Anglani, P. Antonaci, S.I.C. Gonzales, G. Paganelli, J.-M. Tulliani, 3D printed capsules for self-healing concrete applications, 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-X), Bayonne, France, 2019, 1-12. https://doi.org/10.21012/FC10.235356
  27. Iraqi Specifications, IQS 5/1984, for Portland cement, Central Organization for Standardization and Quality Control Baghdad, 1984.
  28. ASTM International, ASTM C150-04, Standard Specification for Portland Cement, American Society for Testing and Materials, West Conshohocken, PA, USA, 2004.
  29. ASTM International, ASTM C33-03, Standard Specification for Concrete Aggregates, American Society for Testing and Materials, West Conshohocken, PA, USA, 2003.
  30. Iraqi Specifications, IQS 5/1984, for Portland cement, Central Organization for Standardization and Quality Control Baghdad, 1984.
  31. ASTM International, ASTM C618-22, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM, West Conshohocken, PA, USA, 2022.
  32. British, BS 5328-2:1997 Concrete. Methods for specifying concrete mixes (AMD 9691) (AMD 10365) (AMD Corrigendum 10612) (AMD 13877) (Withdrawn), British Standard Institution, London, 1997.
  33. British, BS 1881-116:1983, Testing concrete - Method for determination of compressive strength of concrete cubes, British Standard Institution London, 1983.
  34. ASTM International, ASTM C78/C78M-16, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM, West Conshohocken, PA, USA, 2016.
  35. British, BS 1881-116:1983, Testing concrete - Method for determination of compressive strength of concrete cubes, British Standard Institution London, 1983.
  36. ASTM International, ASTM C78/C78M-16, Standard Test Method For Flexural Strength Of Concrete (Using Simple Beam With Third-Point Loading), ASTM, West Conshohocken, PA, USA, 2016.
  37. Minnebo, G. Thierens, G. De Valck, K. Van Tittelboom, N. De Belie, D. Van Hemelrijck, E. Tsangouri, A novel design of autonomously healed concrete: Towards a vascular healing network, Materials, 10 (2017) 49. https://doi.org/10.3390/ma10010049
  38. ASTM International, ASTM E1252-98, Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis, ASTM, West Conshohocken, PA, USA, 1998.
  39. I. Thari, S.A. Salih, S.S. Hasan, Influence of using different percentages of waste materials on the strength properties of polymer concrete, IOP Conference Series: Mater. Sci. Eng., IOP Publishing Ltd, 2020, 012067. https://doi.org/10.1088/1757-899X/737/1/012067
  40. I. Ibrahim, M. Ramaid, A.H. Ali, The effects of adding nano ZRO2 on the physical and some mechanical properties of cement paste, J. Eng. Sustainable Dev., 24 (2020) 20-25.http://dx.doi.org/10.31272/jeasd.24.4.3
  41. Al-Moselly, M. Fall, S. Haruna, Further insight into the strength development of cemented paste backfill materials containing polycarboxylate ether-based superplasticizer, J. Build. Eng., 47 (2022) 103859. https://doi.org/10.1016/j.jobe.2021.103859
  42. Li, L.R.d. Souza, C. Litina, A.E. Markaki, A. Al-Tabbaa, Feasibility of using 3D printed polyvinyl alcohol (PVA) for creating self-healing vascular tunnels in cement system, Materials, 12 (2019) 3872. https://doi.org/10.3390/ma12233872
  43. A.n. Hameed, F.M. Othman, A.A. Abdul-Hamead, Integration of FDM and self-healing technology: evaluation of crack sealing by durability and mechanical strength, Mater. Res. Express, 10 (2023) 125701. http://dx.doi.org/10.1088/2053-1591/ad0c7d
  44. Chen, Y. Zhu, W. Du, M. Li, Y. Wang, C. Zhang, M. Shi, B. Xue, Influence of Polycarboxylate Superplasticizer on the Properties of Cement-Fly Ash Cementitious Materials and Concrete, Sustainability, 14 (2022) 13440. https://doi.org/10.3390/su142013440
  45. B. Cheah, W.K. Chow, C.W. Oo, KH Leow, The influence of type and combination of polycarboxylate ether superplasticizer on the mechanical properties and microstructure of slag-silica fume ternary blended self-consolidating concrete, J. Build. Eng., 31 (2020) 101412.https://doi.org/10.1016/j.jobe.2020.101412
  46. J. Monteiro, G. Geng, D. Marchon, J. Li, P. Alapati, K.E. Kurtis, M.J.A. Qomi, Advances in characterizing and understanding the microstructure of cementitious materials, Cem. Concr. Res., 124 (2019) 105806. https://doi.org/10.1016/j.cemconres.2019.105806
  47. Kunther, S. Ferreiro, J. Skibsted, Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders, J. Mater. Chem. A., 5 (2017) 17401-17412. https://doi.org/10.1039/C7TA06104H
  48. B. Cheah, W.K. Chow, C.W. Oo, KH Leow, The influence of type and combination of polycarboxylate ether superplasticizer on the mechanical properties and microstructure of slag-silica fume ternary blended self-consolidating concrete, J. Build. Eng., 31 (2020) 101412. https://doi.org/10.1016/j.jobe.2020.101412
  49. Yang, H. Lee, Drying shrinkage and rapid chloride penetration resistance of recycled aggregate concretes using cement paste dissociation agent, Materials, 14 (2021) 1478. https://doi.org/10.3390/ma14061478
  50. Liao, D. Li, S. Zhou, X. Zhang, Y. Fang, Study on the Hydration and Physical Properties of Cement by M18 Polycarboxylate Superplasticizer Modified Graphene Oxide, J. Renew. Mater., 11 (2023) 625-641. http://dx.doi.org/10.32604/jrm.2022.022501
Statistics
Article View: 51
PDF Download: 75


Journal Management System. Powered by ejournalplus.com