Mohammed, Z. (2023). Solid State Devices Used in Combining Coding and Phase Modulation. Alustath, 28(2), 67-74. doi: 10.33899/rengj.2023.137495.1221
Ziad Saeed Mohammed. "Solid State Devices Used in Combining Coding and Phase Modulation". Alustath, 28, 2, 2023, 67-74. doi: 10.33899/rengj.2023.137495.1221
Mohammed, Z. (2023). 'Solid State Devices Used in Combining Coding and Phase Modulation', Alustath, 28(2), pp. 67-74. doi: 10.33899/rengj.2023.137495.1221
Mohammed, Z. Solid State Devices Used in Combining Coding and Phase Modulation. Alustath, 2023; 28(2): 67-74. doi: 10.33899/rengj.2023.137495.1221

Solid State Devices Used in Combining Coding and Phase Modulation

Al-Rafidain Engineering Journal (AREJ)
Volume 28, Issue 2, September 2023, Pages 67-74    PDF (868.28 K)
Document Type: Research Paper
DOI: 10.33899/rengj.2023.137495.1221
Author
Ziad Saeed Mohammed*
Department of Computer Technology Engineering, Technical Engineering College/Mosul, Northern Technical University, Mosul, Iraq
Abstract
The current project dealing with communication system through adoption of the particular digital modulation by using solid state components as a semiconductor device, using the phase- Shift keying (PSK) signal that has been adopted by combined coding with phase modulation. To increase the coded signal's minimum free distance as an objective of the work, by using the coding (Channel Coding) is a preferred approach to enhance the signal to noise ratio (SNR) performance of the transmission of digital signals, and for completing of the project task, a simulation methodology has been implemented the required investigation. The results reveal that the minimum free distance is equal the root of 2, i.e D= 1.414, the output encoder with rate of 2/3 i.e 8-PSK signal and the change of phase of the signal point does affect the minimum free distance of the coded signal.
Keywords
Convolution code; Digital communication; Multiphase signal waveform; Solid state devices
References
  1. Silage "Digital Communication Systems Using SystemVue"ch3. Charles River Media, Inc.2006.
  2. Xiong,” Digital Modulation Techniques” ARTECH HOUSE, INC, 2006.
  3. Haykin, “Communications Systems”. Wiley, 2000.
  4. Govindarajuy and K. Baskaran, “Analysis and Implementation of Multiphase Multilevel Hybrid Single Carrier Sinusoidal Modulation” , Journal of Power Electronics, Vol. 10, No. 4, July 2010.
  5. Tse and P. Viswanath, “Fundamentals of Wireless Communication”, Cambridge University Press, New York, NY, USA 2005..
  6. Poole, Adrio, “Modulation basics, part 2: Phase modulation Communications Ltd”, Staines, UK 06.08.2008
  7. Mathuranathan, “QPSK modulation & demodulation (Matlab and Python” , Independently published, October 19, 2010.
  8. Latawa, and N. Aydin “Applications of Convolutional Codes to DNA Codes and Error-Correction”, 1Liberal Arts and Science Academy (LASA), Austin, TX, USA.2021.
  9. Vijay K. Garg, “Speech Coding and Channel Coding”, Wireless Communications & Networking, 2007.
  10. Mesleh, M. Di Renzo, H. Haas, P. M. Grant, “Trellis Coded Spatial Modulation”,IEEE Transactions on Wireless Communications,Volume: 9, Issue: 7, July 2010.
  11. Xiaofeng Chen, “A Brief Introduction on Shannon’s Information Theory”,arXiv:1612.09316v1 [cs.IT] 20 Dec 2016.
  12. Chang, “An Introduction to Error-Correcting Codes: From Classical to Quantum” Carnegie Mellon University,2018.
  13. P. Lathi, Zhi Ding, “Modern digital and analog communication systems” Oxford University Press, Inc,2009.
  14. K. Mohammad, F. H. Taha,” Fabrication and Study of Memory Cell SwitchiProperties Based on Cu2S Compound”,Al- Rafidain Engineering Journal (AREJ), vol. 20, Issue 6, December 2012.
Statistics
Article View: 123
PDF Download: 131


Journal Management System. Powered by ejournalplus.com