Al-Mohammed, M., Al-Hadidy, A. (2023). Durability and Rutting Resistance of SBS-Modified Asphalt Mixtures Containing Blowdown as a Sustainable Filler. Alustath, 28(2), 48-57. doi: 10.33899/rengj.2023.142194.1273
Mohammed A. Al-Mohammed; A. I. Al-Hadidy. "Durability and Rutting Resistance of SBS-Modified Asphalt Mixtures Containing Blowdown as a Sustainable Filler". Alustath, 28, 2, 2023, 48-57. doi: 10.33899/rengj.2023.142194.1273
Al-Mohammed, M., Al-Hadidy, A. (2023). 'Durability and Rutting Resistance of SBS-Modified Asphalt Mixtures Containing Blowdown as a Sustainable Filler', Alustath, 28(2), pp. 48-57. doi: 10.33899/rengj.2023.142194.1273
Al-Mohammed, M., Al-Hadidy, A. Durability and Rutting Resistance of SBS-Modified Asphalt Mixtures Containing Blowdown as a Sustainable Filler. Alustath, 2023; 28(2): 48-57. doi: 10.33899/rengj.2023.142194.1273

Durability and Rutting Resistance of SBS-Modified Asphalt Mixtures Containing Blowdown as a Sustainable Filler

Al-Rafidain Engineering Journal (AREJ)
Volume 28, Issue 2, September 2023, Pages 48-57    PDF (681.24 K)
Document Type: Research Paper
DOI: 10.33899/rengj.2023.142194.1273
Authors
Mohammed A. Al-Mohammed* ; A. I. Al-Hadidy
Civil Engineering Department, College of Engineering, University of Mosul, Mosul, Iraq
Abstract
In the pursuit of a sustainable environment, and facing the threat of the continuous growth of solid waste in Iraq, this study investigated the impact of using blowdown, a carbon-sulfur byproduct material of sulfur purification, as a mineral filler on durability and rutting resistance in dense-graded asphalt mixtures using Styrene-Butadiene-Styrene (SBS)-modified asphalt. Three different blowdown rates (4%, 5%, and 6% by weight of aggregate) were used as potential calcium carbonate (CaCO3) replacements. Laboratory tests and parameters, including Marshall stability, indirect tensile strength, tensile strength ratio (durability), and deformation strength, were conducted, and the results were analyzed statistically using Minitab software. The results showed that using 5% blowdown in SBS-modified asphalt mixtures increases the deformation strength, indirect tensile strength at 25 °C, Marshall stability, and Marshall quotient by 51.23%, 0.21%, 14.27%, and 31.44%, respectively, compared to the control mixture that contains CaCO3 filler indicating that using of blowdown as a filler in asphalt mixtures may offer benefits such as enhancing the cracking and rutting resistance of asphalt mixtures while meeting Marshall properties and moisture susceptibility standards and the potential to provide financial advantages and reduce landfill use.
Keywords
Blowdown; Sustainable materials; Durability; Deformation strength; Mineral filler
References
  1. Y. Huang, R. N. Bird, and O. Heidrich, "A review of the use of recycled solid waste materials in asphalt pavements," Resources, conservation and recycling, vol. 52, no. 1, pp. 58-73, 2007.
  2. F. Russo et al., "Sustainable asphalt mastics made up recycling waste as filler," Journal of Environmental Management, vol. 301, p. 113826, 2022.
  3. K.-z. Yan, H.-b. Xu, and H.-l. Zhang, "Effect of mineral filler on properties of warm asphalt mastic containing Sasobit," Construction and Building Materials, vol. 48, pp. 622-627, 2013.
  4. N. A .H. AL- Saffar, "The Effect of Filler Type and Content on Hot Asphalt Concrete Mixtures Properties," Al-Rafidain Engineering Journal (AREJ), vol. 21, no. 6, pp. 88-100, 2013, doi: 10.33899/rengj.2013.82394.
  5. A. Al-Hadidy, "Influence of polyethylene and sulfur wastes on characteristics of asphalt paving materials," MSc thesis, College of Engineering, Civil Engineering Department, Al-Mustansiriyah University, Baghdad-Iraq, 2001.
  6. A. T. Hameed and A. R. I. Al-Hadidy, "The Effect Of Sulfur Waste And ABS On Asphalt Cement Properties," Al-Rafidain Engineering Journal (AREJ), vol. 19, no. 3, pp. 1-10, 2011, doi: 10.33899/rengj.2011.27005.
  7. M. Chen, J. Geng, C. Xia, L. He, and Z. Liu, "A review of phase structure of SBS modified asphalt: Affecting factors, analytical methods, phase models and improvements," Construction and Building Materials, vol. 294, p. 123610, 2021.
  8.  J.-S. Chen and C. Huang, "Fundamental characterization of SBS‐modified asphalt mixed with sulfur," Journal of applied polymer science, vol. 103, no. 5, pp. 2817-2825, 2007.
  9.  ASTM, "Standard specification hot-mixed, hot laid bituminous paving mixtures," D3515, ASTM International, West Conshohocken, PA, 2001.
  10. ASTM, "Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine," C131, ASTM International, West Conshohocken, PA, 2006.
  11. ASTM, "Standard test method for determining the percentage of fractured particles in coarse aggregate," D5821, ASTM International, West Conshohocken, PA, 2017.
  12. ASTM, "Standard test methods for uncompacted void content of fine aggregate (as influenced by particle shape, surface texture, and grading)," C1252, ASTM International, West Conshohocken, PA, 2017.
  13. ASTM, "Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate," C88, ASTM International, West Conshohocken, PA, 2013.
  14. ASTM, "Standard test method for relative density (specific gravity) and absorption of coarse aggregate," C127, ASTM International, West Conshohocken, PA, 2015.
  15. ASTM, "Standard test method for relative density (specific gravity) and absorption of fine aggregate," C128, ASTM International, West Conshohocken, PA, 2015.
  16. A.-H. AI, A. F. Jasim, and A. M. Rashed, "Mechanistic analysis and durability of thiophene paving mixtures," Journal of Materials in Civil Engineering, vol. 34, no. 7, p. 06022002, 2022.
  17. S. S. Shareef, A. Thaeir, and O. Motea, "Concentration and study of the carbon-sulfur residues resulting from the thermal purification of Fracsh sulfur in the Al-Mishraq sulfur mine," Journal of Survey in Fisheries Sciences, vol. 10, no. 1S, pp. 5355-5367, 2023.
  18.  SCRB, General Specification for Roads and Bridges. 2007.
  19. M. B. K, "The Use of Sulfur Residues from Mishraq Sulfur as a Raw Material in the Preparation Of  Nanoparticle Sulfur," College of Education for Girls, University of Mosul, 2021.
  20. A. Al-Hadidy, "Performance of SBS-HMA mixes made with sasobit and zeolite," Journal of Materials in Civil Engineering, vol. 32, no. 10, p. 06020017, 2020.
  21. ASTM, "Standard practice for determining the separation tendency of polymer from polymer modified asphalt," D7173, ASTM International, West Conshohocken, PA, 2014.
  22.  D. Sun, F. Ye, F. Shi, and W. Lu, "Storage stability of SBS-modified road asphalt: Preparation, morphology, and rheological properties," Petroleum Science and Technology, vol. 24, no. 9, pp. 1067-1077, 2006.
  23. N. C. f. C. L. NCCL, Materials and Construction Works Specification. Ministry of Housing and Construction and Public Works, Directorate of Research and Technical Affairs, 2018.
  24. ASTM, "Standard test method for penetration of bituminous materials," D5/D5M, ASTM International, West Conshohocken, PA, 2020.
  25. ASTM, "Standard test method for softening point of bitumen (ring-and-ball apparatus)," D36/D36M, ASTM International, West Conshohocken, PA, 2020.
  26. ASTM, "Standard test method for density of semi-solid asphalt binder (pycnometer method)," D70/D70M, ASTM International, West Conshohocken, PA, 2021.
  27. ASTM, "Standard test method for flash and fire points by Cleveland open cup tester," D92, ASTM International, West Conshohocken, PA, 2018.
  28. ASTM, "Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer," D4402/D4402M, ASTM International, West Conshohocken, PA, 2023.
  29. ASTM, "Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer," D6084, ASTM International, West Conshohocken, PA, 2021.
  30. ASTM, "Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test)," D2872, ASTM International, West Conshohocken, PA, 2019.
  31. ASTM, "Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer," D7175, ASTM International, West Conshohocken, PA, 2015.
  32. ASTM, "Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)," D6648, ASTM International, West Conshohocken, PA, 2008.
  33. ASTM, "Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures," D6927, ASTM International, West Conshohocken, PA, 2022.
  34. ASTM, "Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures," D6931, ASTM International, West Conshohocken, PA, 2017.
  35.  ASTM, "Standard test method for effect of moisture on asphalt concrete paving mixtures," D4867/D4867M, ASTM International, West Conshohocken, PA, 2022.
  36. Y. S. Doh, K. K. Yun, S. N. Amirkhanian, and K. W. Kim, "Framework for developing a static strength test for measuring deformation resistance of asphalt concrete mixtures," Construction and Building Materials, vol. 21, no. 12, pp. 2047-2058, 2007.
  37. N. Kim, J. Park, J. S. Choi, S. Kim, and K. W. Kim, "Correlation of Deformation Strength (SD) and Tensile Strength of Asphalt Mixtures," Journal of the Korean Asphalt Institute, vol. 1, no. 1, pp. 62~ 69-62~ 69, 2011.
  38. M. Arabani, S. A. Tahami, and M. Taghipoor, "Laboratory investigation of hot mix asphalt containing waste materials," Road Materials and Pavement Design, vol. 18, no. 3, pp. 713-729, 2017.
  39. N. T. Trang, T. N. Hung, P. H. Khang, B. X. Cậy, and B. N. Kien, "Research on the effects of sulfur on characteristics of sulfur bituminous binder (SBB) and hot mix asphalt-sulfur (HMAS)," Transport & Communications Science J.(72), vol. 1, 2021.
  40. A. Institute, "MS-2 asphalt mix design methods," ed: Lexington Kentucky, USA, 2014.
  41. A. J. Taylor, N. H. Tran, R. May, D. H. Timm, M. M. Robbins, and B. Powell, "Laboratory evaluation of sulfur-modified warm mix," Journal of the Association of Asphalt Paving Technologists, vol. 79, 2010.
  42. M. A. Gul et al., "Evaluation of various factors affecting mix design of sulfur-extended asphalt mixes," Construction and Building Materials, vol. 290, p. 123199, 2021.
  43. I. a. T. i. K. Ministry of Land, Guideline for construction of asphalt concrete pavement. 2017
Statistics
Article View: 227
PDF Download: 214


Journal Management System. Powered by ejournalplus.com