Muhammed, M., Almuramady, N. (2023). A review of modelling and inspection techniques in micro/nanoscales of dry friction of rough surfaces. Alustath, (), -. doi: 10.30772/qjes.2023.141737.1008
Muhammed Abdulhasan Muhammed; Nabeel Almuramady. "A review of modelling and inspection techniques in micro/nanoscales of dry friction of rough surfaces". Alustath, , , 2023, -. doi: 10.30772/qjes.2023.141737.1008
Muhammed, M., Almuramady, N. (2023). 'A review of modelling and inspection techniques in micro/nanoscales of dry friction of rough surfaces', Alustath, (), pp. -. doi: 10.30772/qjes.2023.141737.1008
Muhammed, M., Almuramady, N. A review of modelling and inspection techniques in micro/nanoscales of dry friction of rough surfaces. Alustath, 2023; (): -. doi: 10.30772/qjes.2023.141737.1008

A review of modelling and inspection techniques in micro/nanoscales of dry friction of rough surfaces

Al-Qadisiyah Journal for Engineering Sciences
Articles in Press, Accepted Manuscript, Available Online from 30 December 2023    PDF (465.24 K)
Document Type: Review Paper
DOI: 10.30772/qjes.2023.141737.1008
Authors
Muhammed Abdulhasan Muhammed* ; Nabeel Almuramady
Department of Mechanical Engineering, College of Engineering, Al- Qadisiyah University, Al-Diwaniyah +964, Iraq
Abstract
In reality, there are a number of tiny contact asperities on the contact surface, which may be seen at the micro/ nano scales. The total mechanical behavior is the product of all asperities that are involved during the contact. There are still a lot of unresolved issues in the study of contact and dry friction behavior of rough surfaces because of the variety of surface topography, complexity of the contact scale, and nonlinearity of the constitutive materials. The complexity of the friction mechanism and its misunderstood nature pose significant challenges in this study. This paper provides a comprehensive review of typical dry friction behaviors observed at the micro- and nanoscales. The significance of surface roughness, the role of contact mechanics, and the impact of experimental and theoretical approaches in modeling and simulation have been examined at this study. Additionally, the manuscript highlights the crucial role of proximal probing techniques, particularly the Atomic Force Microscopy (AFM) technique.
Keywords
Contact; Friction; Microscale; Nanoscale; Roughness
References
  • R. Mufti, A. Putra, S. Pandu, R. Pratama, and R. Prabowo, "Failure of Friction Brake Components against Rapid Braking Process: A Review on Potential Challenges and Developments," Transportation Research Procedia, vol. 55, pp. 653-660, 2021. [Online]. Available: https://doi.org/10.1016/J.TRPRO.2021.07.096
  • Devaraju, "A review on important factors affecting dry sliding friction," Journal of Surface Science and Technology, vol. 32, pp. 73-78, 2016. [Online]. Available:
  • Luo, "Investigation on the origin of friction and superlubricity," Chinese Science Bulletin, vol. 65, no. 27, pp. 2966-2978, 2020. [Online]. Available: https://doi.org/10.1360/TB-2020-0505
  • Antoine, G. Nöhring, L. A. Thimons, T. D. Jacobs, and L. Pastewka, "Scale-dependent roughness parameters for topography analysis," APS Advances, vol. 7, p. 100190, 2022. [Online]. Available:
 https://doi.org/10.1016/J.APSADV.2021.100190

  • M. Patrikar, "Modeling and simulation of surface roughness," Applied Surface Science, vol. 228, no. 1-4, pp. 213-220, 2004. [Online]. Available:
  • Pawlus, R. Reizer, M. Wieczorowski, and G. Krolczyk, "Material ratio curve as information on the state of surface topography—A review," Precision Engineering, vol. 65, pp. 240-258, 2020. [Online]. Available: https://doi.org/10.1016/j.precisioneng.2020.05.008
  • S. Adams and M. Nosonovsky, "Contact Modeling — Forces," Tribology International, vol. 33, no. 5-6, pp. 431-442, 2000. [Online]. Available: https://doi.org/10.1016/s0301-679x(00)00063-3
  • A. Thimons, A. Gujrati, S. Antoine, L. Pastewka, T. D. Jacobs, and D. B. Tevis, "Hard-material Adhesion: Which Scales of Roughness Matter?," Experimental Mechanics, vol. 61, no. 7, pp. 1-12, 2021. [Online]. Available: https://doi.org/10.1007/S11340-021-00733-6
  • I. Taylor, "Rough Surface Contact Modelling—A Review," Lubricants, vol. 10, no. 5, 2022. [Online]. Available: https://doi.org/10.3390/lubricants10050098
  • L. Menezes, M. Nosonovsky, S. P. Ingole, S. V. Kailas, and M. R. Lovell (Eds.), "Tribology for Scientists and Engineers," 2013. [Online]. Available: https://doi.org/10.1007/978-1-4614-1945-7
  • Berger, E. J.. Friction modeling for dynamic system simulation. Applied Mechanics Reviews, (2002, November),. https://doi.org/10.1115/1.1501080
  • Syam, M. Nosonovsky, and M. Nosonovsky, "Topological data analysis for friction modeling," EPL, vol. 135, no. 5, p. 56001, 2021. [Online]. Available: https://doi.org/10.1209/0295-5075/AC2655
  • A. B. S. Muna and K. Abbassa, "Optimization of Friction Stir Processing Parameters for Aluminum Alloy (AA6061-T6) Using Taguchi Method," AL-QADISIYAH J. Eng. Sci., vol. 12, pp. 001–006, 2019. [Online]. Available: https://doi.org/10.1016/j.matpr.2017.02.044
  • Alobaidi and N. Almuramady, "Influence of heat aging on tensile test in rubber-epoxy composites," Al-Qadisiyah Journal for Engineering Sciences, vol. 15, no. 2, pp. 131-134, 2022. [Online]. Available: https://doi.org/10.30772/qjes.v15i2.824
  • A. Oudah and M. A. Hassan, "Semisolid state sintering behavior of aluminum-stainless steel 316L-nickel composite materials in powder metallurgy," AL-QADISIYAH J. Eng. Sci., vol. 15, no. 9, pp. 202-209, 2022. [Online]. Available: https://doi.org/10.3390/ma12091473
  • M. Alwan, "Effect of Friction Forces in Robotic Mechanism Joints on the Dynamic Analysis," Al-Qadisiyah Journal for Engineering Sciences, vol. 7, no. 4, pp. 331-342, 2017. [Online]. Available: https://qu.edu.iq/journaleng/index.php/JQES/article/view/366
  • Zhang, R. Namakian, X. Zhang, W. J. Meng, J. Hay, and K. Johanns, "A novel approach for microscale dry contact stiction and friction assessment: Experimentation and analysis," Materials & Design, vol. 212, p. 110207, 2021. [Online]. Available: https://doi.org/10.1016/J.MATDES.2021.110207
  • J. Weymouth, O. Gretz, E. Riegel, and F. J. Giessibl, "Measuring sliding friction at the atomic scale," Jpn. J. Appl. Phys., vol. 61, no. SL, 2022. [Online]. Available: https://doi.org/10.35848/1347-4065/ac5e4a
  • C. S. Sandeep, S. Li, and K. Senetakis, "Scale and Surface Morphology Effects on the Micromechanical Contact Behavior of Granular Materials," Tribology International, vol. 159, p. 106929, 2021. [Online]. Available: https://doi.org/10.1016/j.triboint.2021.106929
  • Afshar-Mohajer, X. Yang, M. Zou, "Understanding the friction and deformation behavior of micro/nano-hierarchical textures through in-situ SEM observation and mechanics modeling," Tribology International, vol. 165, 2022. [Online]. Available: https://doi.org/10.1016/j.triboint.2021.107271
  • N. Vadgama, R. L. Jackson, and D. K. Harris, "Molecular scale analysis of dry sliding copper asperities," Appl. Nanosci., vol. 5, no. 4, pp. 469-480, 2015. [Online]. Available: https://doi.org/10.1007/s13204-014-0339-9
  • A. H. Hanaor, Y. Gan, and I. Einav, "Static friction at fractal interfaces," Tribology International, vol. 93, pp. 229-238, 2016. [Online]. Available: https://doi.org/10.1016/j.triboint.2015.09.016
  • P. Kshirsagar and H. Khairnar, "Investigation of Coefficient of Friction at The Interface of Automobile Brake Pads Using Greenwood-Williamson Contact Model and Novel Test Rig," FME Transactions, vol. 50, pp. 561-575, 2022. [Online]. Available: https://doi.org/10.5937/fme2203561K
  • Almuramady and F. M. Borodich, "Adhesive Contact Between Silicon-Based MEMs Tooth Surfaces Modelled by The Multiscale Multi-Block Model," International Journal Of Advances On Automotive And Technology, 2017. [Online]. Available: https://doi.org/10.15659/ijaat.17.04.523
  • Messer, K., Fahem, A., T. Guthai, A., P. Singh, R. (2022). 'The experimental methods and elastic properties of shale bedding planes materials state-of-the-art review', Al-Qadisiyah Journal for Engineering Sciences, 15(2), pp. 126-130. https://doi.org/10.30772/qjes.v15i2.823
  • Fahem, A.F., Thumbalam Guthai, A. & Singh, R.P. Full-Field Strain Measurement Integrated with Two Dimension Regression Analysis to Evaluate the Bi-Modulus Elastic Properties of Isotropic and Transversely Isotropic Materials. Exp Mech 64, 53–71 (2024). https://doi.org/10.1007/s11340-023-01007-z
  • Michałowski, "Simulation Model for Frictional Contact of Two Elastic Surfaces in micro/nanoscale and Its Validation," Nanotechnology Reviews, vol. 7, no. 5, pp. 355-363, 2018. [Online]. Available: https://doi.org/10.1515/ntrev-2018-0075
  • N. Vadgama, "Molecular Dynamics Simulations of Dry Sliding Asperities to Study Friction and Frictional Energy Dissipation," [Online]. Available: https://doi.org/10.1016/j.biochi.2015.03.025
  • Mu, W. Sun, C. Liu, Y. Wang, B. Yuan, and Q. Sun, "Study on rough surfaces: A novel method for high-precision simulation and interface contact performances analysis," Precision Engineering - Journal of The International Societies for Precision Engineering and Nanotechnology, vol. 73, pp. 11-22, 2022. [Online]. Available: https://doi.org/10.1016/J.PRECISIONENG.2021.08.017
  • L. Jackson, "A model for the adhesion of multiscale rough surfaces in MEMS," in Proceedings of the Annual Southeastern Symposium on System Theory, 2011, pp. 257-262. [Online]. Available: https://doi.org/10.1109/SSST.2011.5753817
  • M. Borodich, A. Pepelyshev, and O. Savencu, "Statistical Approaches to Description of Rough Engineering Surfaces at Nano and Microscales," Tribology International, vol. 103, pp. 197-207, 2016. [Online]. Available: https://doi.org/10.1016/j.triboint.2016.06.043
  • Zhu and L. Ni, "A Static Friction Model for Unlubricated Contact of Random Rough Surfaces at Micro/Nano Scale," Micromachines, vol. 12, no. 4, pp. 368-368, 2021. [Online]. Available: https://doi.org/10.3390/mi12040368
  • Yuan et al., "Research Status of Dry Friction Behavior of Metallic Materials: A Brief Review," Surface Review and Letters, vol. 27, no. 12, pp. 2030003-2030003, 2020. [Online]. Available: https://doi.org/10.1142/s0218625x20300038
  • Zhai et al., "Recent Progress on Wear-Resistant Materials: Designs, Properties, and Applications," Advanced Science, vol. 8, no. 11, p. 2003739, 2021. [Online]. Available: https://doi.org/10.1002/advs.202003739
  • Kurdi, N. Alhazmi, H. Alhazmi, and T. Tabbakh, "Practice of Simulation and Life Cycle Assessment in Tribology—A Review," Materials, vol. 13, no. 16, p. 3489, 2020. [Online]. Available: https://doi.org/10.3390/ma13163489
  • Nosonovsky and B. Bhushan, "Multiscale Friction Mechanisms and Hierarchical Surfaces in Nano- and Bio-Tribology," Materials Science and Engineering: R: Reports, vol. 58, no. 3, pp. 162-193, 2007. [Online]. Available: https://doi.org/10.1016/j.mser.2007.09.001
  • Bhushan, Nanotribology and Nanomechanics: An Introduction. Springer Berlin Heidelberg, 2005, pp. 1-1148. [Online]. Available: https://doi.org/10.1007/3-540-28248-3
  • Wang et al., "Non-Empirical Law for Nanoscale Atom-by-Atom Wear," Advanced Science, vol. 8, no. 2, p. 2002827, 2020. [Online]. Available: https://doi.org/10.1002/advs.202002827
  • Zhang, D. Li, and Y. Liu, "Friction Behavior of Rough Surfaces on the Basis of Contact Mechanics: A Review and Prospects," Micromachines, vol. 13, no. 11, p. 1907, 2022. [Online]. Available: https://doi.org/10.3390/mi13111907
 

Statistics
Article View: 5,318
PDF Download: 55


Journal Management System. Powered by ejournalplus.com