Effect of die length, moisture content and particle size on some mechanical and physical properties of poultry feed pellets

Farhan, Ahmed S.; Hussein, Affan O.

doi:10.58928/ku23.14322

	Effect of die length, moisture content and particle size on some mechanical and physical properties of poultry feed pellets
Kirkuk University Journal For Agricultural Sciences
Volume 14, Issue 3, September 2023, Pages 201-211 PDF (1006.01 K)
Document Type: Research Paper
DOI: 10.58928/ku23.14322
Authors
Ahmed S. Farhan^* ¹; Affan O. Hussein²
¹Department of Animal Resources, College of Agricultural Engineering Science, University of Salahaddin, Erbil, IRAQ.
²Department of Plant Protection, Khabat Technical Institute, Erbil Polytechnic University, Erbil, IRAQ.
Abstract
This study investigates the role of manufacturing characteristics on some mechanical and physical properties of poultry feed pellets. laboratory study of 3 x 3 x 3 factorial experiment laid out to study the effect of die lengths (L1 = 3, L2 = 4, and L3 = 5) cm, moisture content of feedstuff (M1 = 12, M2 = 14 and M3 = 16) % and particle sizes (P1 = 0.5, P2 = 1 and P3 = 1.5) mm and their interactions on some physical and mechanical properties of poultry feed pellets. Pellet Durability Index (PDI), pellet hardness, bulk density of pellets and feedstuff, unit density of pellets, and power consumption were measured and evaluated. Results revealed that the interaction of longer die lengths, higher moisture content, and smaller particle size treatment (L₃M₃P₁) significantly increased the PDI (95.6%), hardness (6.4 Kg), and bulk density (683.97 Kg m^-3) when it compared with other treatments. Unit density increased with the treatment (L₃M₂P₂) when it compared with other treatments which it was 1453.29 Kg m³. The highest power consumption of 4.51 Kwh^-1 was recorded with the treatment (L₃M₃P₃) while the lowest value was for the treatment (L₁M₁P₁) and it was 3.07 Kwh^-1but statistically, there were no significant differences in power consumption between the treatments, the differences were only mathematically. According to the results obtained in this work, we can conclude that when using the long die path combined with high moisture content and fine feedstuff can produce better pellets which are physically and mechanically accepted by farmers.
Keywords
bulk density; pellets durability; pellets hardness; power consumption; pellets unit density

References
Khdr, N.E., Ismael, T.E. and Mohamed, F.S., 2019. Effects of commercial pellet and mash feed on performance of broiler chickens. Amerah, A.M., Gilbert, C., Simmins, P.H. and Ravindran, V., 2011. Influence of feed processing on the efficacy of exogenous enzymes in broiler diets. World's Poultry Science Journal, 67(1), pp.29-46. McKinney, L.J. and Teeter, R.G., 2004. Predicting effective caloric value of nonnutritive factors: I. Pellet quality and II. Prediction of consequential formulation dead zones. Poultry Science, 83(7), pp.1165-1174. Thomas, M. and van der Poel, A.F.B., 2020. Fundamental factors in feed manufacturing: Towards a unifying conditioning/pelleting framework. Animal Feed Science and Technology, 268, p.114612. Briggs, J.L., Maier, D.E., Watkins, B.A. and Behnke, K.C., 1999. Effect of ingredients and processing parameters on pellet quality. Poultry science, 78(10), pp.1464-1471. Ziggers, D., 2003. Die determines pellet production. Feed Tech, 7(8), pp.17-9. Zimonja, O., Stevnebø, A. and Svihus, B., 2007. Nutritional value of diets for broiler chickens as affected by fat source, amylose level and diet processing. Canadian Journal of Animal Science, 87(4), pp.553-562. Muramatsu, K., Massuquetto, A., Dahlke, F. and Maiorka, A., 2015. Factors that affect pellet quality: a review. Journal of Agricultural Science and Technology, 9(2), pp.717-722. Behnke, K.C. and Gilpin, A., 2014. Principles of mash conditioning. Feed Pelleting Reference Guide. Kansas State University, Manhattan, Kansas, USA. Svihus, B., (2009). Lecture notes Grinding, HFE 305 course, NMBU Department of Animal and Aquacultural Sciences. Quentin, M., Bouvarel, I. and Picard, M., 2004. Short-and long-term effects of feed form on fast-and slow-growing broilers. Journal of Applied Poultry Research, 13(4), pp.540-548. Corzo, A., Mejia, L. and Loar II, R.E., 2011. Effect of pellet quality on various broiler production parameters. Journal of Applied Poultry Research, 20(1), pp.68-74. Lilly, K.G.S., Gehring, C.K., Beaman, K.R., Turk, P.J., Sperow, M. and Moritz, J.S., 2011. Examining the relationships between pellet quality, broiler performance, and bird sex. Journal of Applied Poultry Research, 20(2), pp.231-239. Reimer, L., 1992. Northern Crops Institute feed mill management and feed manufacturing technology short course. California Pellet Mill Co.: Crawfordsville, IN. Čolović, R., Vukmirović, Đ., Matulaitis, R., Bliznikas, S., Uchockis, V., Juškienė, V. and Lević, J., 2010. Effect of die channel press way length on physical quality of pelleted cattle feed. Food and feed research. Novi Sad: Institute for Food Technology (FINS), 2010, Vol. 37, iss. 1. Muramatsu, K., 2013. Predictive Modeling Application in Pelleting Process of the Feed for Broilers (Doctoral dissertation, Ph. D. thesis, Universidade Federal do Paraná, Curitiba). Mina-Boac, J., Maghirang, R.G. and Casada, M.E., 2006. Durability and breakage of feed pellets during repeated elevator handling. In 2006 ASAE Annual Meeting(p. 1). American Society of Agricultural and Biological Engineers. Lowe, R., 2005. Judging pellet stability as part of pellet quality. AFMA Matrix (South Africa). Salama, A., Tawfik, M.A. and Abd-Elaal, M.M., 2021. PERFORMANCE EVALUATION OF A NOVEL DESIGN OF FEED PELLETS VERTICAL COOLER. Zagazig Journal of Agricultural Research, 48(3), pp.729-745. , 2017. Moisture Measurement-Unground Grain and Seeds. American Society of Agricultural Engineers, St Joseph, MI, USA. Shaw, M. and Tabil, L., 2006. Mechanical properties of selected biomass grinds. In 2006 ASAE Annual Meeting (p. 1). American Society of Agricultural and Biological Engineers. , 2017. Method of determining and expressing fineness of feed materials by sieving. ASABE, St. Joseph, MI. USA. Olugboji O.A., M.S. Abolarin, M.O. Owolewa, K.C. Ajani, 2015. Design, Construction and Testing of a Poultry Feed Pellet Machine. International Journal of Engineering Trends and Technology (IJETT). Volume 22, Number 4. 168-172. , 2016. Wafers, pellets, crumbles-definitions and methods for determining density, durability, and moisture content. American Society of Agricultural Engineers, St Joseph, MI, USA. Thomas, M.A.F.B. and Van der Poel, A.F.B., 1996. Physical quality of pelleted animal feed 1. Criteria for pellet quality. Animal feed science and technology, 61(1-4), pp.89-112. Shanahan, C. 2016. The relationship between the volume of a cylinder and its height and radius. Project Maths. http://www.projectmaths.ie/documents/MathsCounts2016/RelationshipsInACylinder.pdf. Evans, C.E., Saensukjaroenphon, M., Gebhardt, J.T., Stark, C.R. and Paulk, C.B., 2021. Effects of conditioning temperature and pellet mill die speed on pellet quality and relative stabilities of phytase and xylanase. Translational Animal Science, 5(3), p. txab043. Metwally KA (2010) Study the effect of some operational Factors on hammer mill. SPSS (2011). Statistical Packages for the Social Sciences, 20th edn., IBM Inc, Chicago, USA.
Statistics Article View: 884 PDF Download: 101