Enhancing the effectiveness of the cooling system for automotive engine by employing different nanofluids: literature review | ||
Anbar Journal of Engineering Sciences | ||
Article 6, Volume 13, Issue 1, May 2022, Pages 53-58 PDF (609.11 K) | ||
Document Type: Review Paper | ||
DOI: 10.37649/aengs.2022.175880 | ||
Author | ||
Israa Ali Abdulghafor* | ||
Middle Technical University, Institute of Technology-Baghdad, Iraq | ||
Abstract | ||
The cooling system of a car engine effects strongly the efficiency of the car engine so many studies were presented to enhance the cooling system of the car. The components of the cooling system are radiator, water pumps, fan, shutters, thermostats, expansion tanks/storage tanks, water pipes, water temperature gauges, etc. Among these components, the radiator considers the primary key to enhancing the efficiency of the car engine. Many studies were achieved to enhance the efficiency of car radiators by using different nanofluids as a coolant are discussed in this literature review study. These previous studies investigated various kinds of nanofluids such as Al2O3, CuO, TiO2, SiO2, and ZnO with different base fluids. Nanofluid concentrations, nanofluid temperature, and nanofluid flow rate were studied by previous studies eleven years ago. | ||
Keywords | ||
Radiator; Nanofluid and Radiator; heat transfer; Automotive engine | ||
References | ||
[1] Brandon Fell, Scott Janowiak, Alexander Kazanis, and Jeffrey Martinez,‘‘ High-Efficiency Radiator Design for Advanced Coolant’’. ME450 Katsuo Kurabayashi,2007,2:50 [2] P.K.Trivedi and N.B.Vasava,‘‘ Study of the Effect of Mass flow Rate of Air on Heat Transfer Rate in automobile radiator by CFD simulation using CFX’’,2012, 6:1-4 [3] F. G. Henkel, ‘‘Computer Simulation of Automotive Cooling Systems’’,1974, pp, 422-432. [4] Oliet, C., A. Oliva, J. Castro, and C. D. Pérez-Segarra, ‘‘Parametric studies on automotive radiators’’, 2007, pp, 2033-2043. [5] Alam, T., and M.-H. Kim, ‘‘A comprehensive review on single-phase heat transfer enhancement in techniques in heat exchanger applications ’’,2018, pp, 813-839. [6] Sidik NA, Yazid MN, Mamat R, ‘‘Recent advancement of nanofluids in engine cooling systems’’,2017, pp, 137-144. [7] HerisSZ, Esfahany MN, Etemad G,‘‘ Numerical investigation of nanofluid laminar convective heat transfer through a circular tube ’’,2007, pp, 1043-1058. [8] Gupta M, Singh V, Said Z,‘‘ Heat transfer analysis using zinc Ferrite/water(Hybrid) nanofluids in a circular tube: an experimental investigation and development of new correlation for thermophysical and heat transfer properties ’’,2020, 39. [9] Ravikanth S. Vajjha, Debendra K. Das, Praveen K. Namburu, ‘‘Numerical study of fluid dynamic and heat transfer performance of Al2O3 and CuO nanofluids in the flat tubes of a radiator’’,2010, pp, 613-621. [10] [10]R. K. ShahA. L. LondonFrank M. White, ‘‘Laminar Flow Forced Convection in Ducts’’,1978,102. [11] S.M.PeyghambarzadehaS.H.HashemabadibS.M.HoseiniaM.SeifiJamnania, ‘‘Experimental study of heat transfer enhancement using water/ethylene glycol-based nanofluids as a new coolant for car radiators ’’, 2011, pp, 1283-1290. [12] Navid Bozorgan, Komalangan Krishnakumar, Nariman Bozorgan,‘‘ Numerical Study on Application of CuO-Water Nanofluid in Automotive Diesel Engine Radiator’’,2012, pp,130-136. [13] V. L. Bhimani, Dr. P. P. Rathod, Prof. A. S. Sorathiya,‘‘ Experimental Study of Heat Transfer Enhancement Using Water Based Nanofluids as a New Coolant for Car Radiators ’’,2013, pp,295-302. [14] M. Ebrahimi, M. Farhadi, K. Sedighi, S. Akbarzade,‘‘ Experimental Investigation of Forced Convection Heat Transfer in a Car Radiator Filled with SiO2-water Nanofluid ’’,2014, pp, 333-340. [15] Ali, Hafiz Muhammad, Ali, Hassan, Liaquat, HassanBin Maqsood, Hafiz Talha, Nadir, Malik Ahmed, Experimental investigation of convective heat transfer augmentation for car radiator using ZnO–water nanofluids,2015, pp, 317-324. [16] D.Srinivasu, D.Santharao, Ramakrishna,‘‘ CFD Analysis To Predict Heat Transfer Performance Of Louver Fin Radiator With Water/Eg & Al2o3 Nano Fluid ’’,2016, pp,159-164. [17] Sobin Alosious, Sarath SR, Anjan R Nair, and K Krishnakumar, ‘‘Experimental and numerical study on heat transfer enhancement of flat tube radiator using Al2O3 and CuO nanofluids ’’,2017, pp, 3545–3563. [18] Ghanshyam J. Lalpurwala1 | Dr. D. B. Jani,‘‘ A CRITICAL REVIEW ON HEAT TRANSFER ENHANCEMENT IN A CAR RADIATOR BY USE OF NANO FLUID’’ International Journal of Research in Mechanical Engineering,2018, pp,25-27
[19] Siraj Ali Ahmed, Mehmet Ozkaymak , Adnan Sözen , Tayfun Menlik , Abdulkarim Fahed,‘‘ Improving car radiator performance by using TiO2-water nanofluid ’’,2018, pp, 996-1005. [20] Zafar Said, M. El-Haj Assad, Ahmed Amine Hachicha, Evangelos Bellos, Mohammad Ali Abdelkareem, Duha Zeyad Alazaizeh, Bahria A. A. Yousef,‘‘ Enhancing the performance of automotive radiators using nanofluids ’’,2019, 112: 183-194. [21] Hasan Kiani, Afshin Ahmadi Nadooshan, ‘‘Thermal performance enhancement of automobile radiator using water‐CuO nanofluid: an experimental study’’,2019, pp,235‐248. [22] Rashmi Sahoo, Thermo-hydraulic characteristics of the radiator with various shape nanoparticle-based ternary hybrid nanofluid,2020, pp, 19-28. [23] AshutoshKumarM.A.HassanPrabhaChand,‘‘ Heat transport in nanofluid coolant car radiator with louvered fins ’’,2020, pp, 631-642. [24] Qais Hussein Hassan, Shaalan Ghanam Afluq, Mohamed Abed Al Abas Siba,‘‘ Numerical Investigation of Heat Transfer in Car Radiation System Using Improved Coolant’’,2021, pp,61-69. | ||
Statistics Article View: 1,147 PDF Download: 173 |