Study the Performance of a Novel Desiccant Heat Exchanger | ||
| Engineering and Technology Journal | ||
| Article 5, Volume 41, Issue 1, January 2023, Pages 45-59 PDF (1.43 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.30684/etj.2022.134120.1221 | ||
| Authors | ||
| Hind M. Taresh* ; Amar S. Abdul-Zahra; Ahmed A. M. Saleh | ||
| University of technology - mechanical engineering- Baghdad - Iraq | ||
| Abstract | ||
| Conserving energy and reducing emissions has become a global consensus. However, most air conditioning systems are highly energy-consuming, affecting global warming and the ozone layer because they use chlorine and fluorine refrigerating fluids. Evaporative cooling systems are one of the most important environmentally friendly air conditioning systems with low energy consumption. However, their performance is negatively affected by the high humidity of the inlet air. One of the solutions to control the relative humidity of the inlet air is using desiccant material. In this paper, a silica gel-coated heat exchanger was designed and constructed as a dehumidifying unit. The effect of airflow rate, hot water flow rate, cold water flow rate, and regeneration temperature on the system's performance has been studied. It was found that increasing the hot water flow rate improves the removing moisture from the desiccant. However, increasing the hot water flow rate has a negative effect on the thermal performance of the heat exchanger. The effectiveness of the heat exchanger was 53% in the regeneration phase and 52% in the cooling phase for the outside air temperature of 40 ºC, W=20 g/kg, and an airflow rate of 0.48 m³/s. From the results shown above, it was noticed that the system could work efficiently in hot and high humidity climates and be used in Iraqi weather. | ||
Highlights | ||
| ||
| Keywords | ||
| Air conditioning; Desiccant material high humidity; Coating heat exchanger Silica gel | ||
| References | ||
|
[1] American Society of Heating Rand A-CE. ANSI/ASHRAE standard 55-2017 thermal environmental conditions for human occupancy. Atlanta, Georgia., 2017. [2] L. Zhao, R. Wang, and T. Ge, Desiccant coated heat exchanger and its applications, Int. J. Refrig., 130 (2021) 217-232. doi.org/10.1016/j.ijrefrig.2021.06.008. [3] P. Vivekh, M. Kumja, D. Bui, and K. Chua, Recent developments in solid desiccant coated heat exchangers–A review, Applied energy., 229 (2018) 778-803. doi.org/10.1016/j.apenergy.2018.08.041 [4] T. Ge, Y. Dai, R. Wang, and Z. Peng, Experimental comparison and analysis on silica gel and polymer coated fin-tube heat exchangers, Energy., 35 (2010) 2893-2900. doi:10.1016/j.energy.2010.03.020 [5] X. Zheng, T. Ge, Y. Jiang, and R. Wang, Experimental study on silica gel-LiCl composite desiccants for desiccant coated heat exchanger, Int. J. Refrig., 51 (2015) 24-32. doi: 10.1016/j.ijrefrig.2014.11.015 [6] X. Zheng, R. Wang, T. Ge, and L. Hu, Performance study of SAPO-34 and FAPO-34 desiccants for desiccant coated heat exchanger systems, Energy., 93 (2015) 88-94.doi.org/10.1016/j.energy.2015.09.024. [7] T. Ge, J. Zhang, Y. Dai, and R. Wang, Experimental study on performance of silica gel and potassium formate composite desiccant coated heat exchanger, Energy., 141 (2017) 149-158. doi.org/10.1016/j.energy.2017.09.090 [8] M. Jagirdar and P. S. Lee, Mathematical modeling and performance evaluation of a desiccant coated fin-tube heat exchanger, Applied energy., 212 (2018) 401-415. doi.org/10.1016/j.apenergy.2017.12.038 [9] A. S. Valarezo, X. Sun, T. Ge, Y. Dai, and R. Wang, Experimental investigation on performance of a novel composite desiccant coated heat exchanger in summer and winter seasons, Energy., 166 (2019) 506-518. doi.org/10.1016/j.energy.2018.10.092 [10] X. Q. Duong, N. V. Cao, W. S. Lee, M. Y. Park, J. D. Chung,and K. J. Bae, Effect of coating thickness, binder and cycle time in adsorption cooling applications, Appl. Therm. Eng., 184(2021)116265. doi.org/10.1016/j.applthermaleng.2020.116265 [11] X. Zheng, R. Wang, and W. Ma, Dehumidification assessment for desiccant coated heat exchanger systems in different buildings and climates: Fast choice of desiccants, Energy Build., 221 (2020) 110083.doi.org/10.1016/j.enbuild.2020.110083 [12] P. Vivekh, D. Bui, M. Waslam, K. Zaw, and K. Chua, Experimental performance and energy effectiveness investigation of composite superabsorbent polymer and potassium formate coated heat exchangers, Appl. Energy., 275 (2020) 115428. doi.org/10.1016/j.apenergy.2020.115428 [13] X. Sun, J. Chen, Y. Zhao, X. Li, T. Ge,and C. Wang, et al., Experimental investigation on a dehumidification unit with heat recovery using desiccant coated heat exchanger in waste to energy system, Appl. Therm. Eng., 185 (2021) 116342. doi.org/10.1016/j.applthermaleng.2020.116342. [14] T. Ge, Y. Dai, and R. Wang, Performance study of silica gel coated fin-tube heat exchanger cooling system based on a developed mathematical model, Energy Convers. Manage., 52 (2011) 2329-2338. doi:10.1016/j.enconman.2010.12.047 [15] Z. Li, S. Michiyuki, and F. Takeshi, Experimental study on heat and mass transfer characteristics for a desiccant-coated fin-tube heat exchanger, International of Heat and Mass Transfer., 89 (2015) 641-651. http://doi.org/10.1016/j.ijheatmasstransfer.2015.05.095 [16] T. Ge, Y. Dai, R. Wang, and Y. Li, Feasible study of a self-cooled solid desiccant cooling system based on desiccant coated heat exchanger, Appl. Therm. Eng. 58 (2013) 281-290. http://dx.doi.org/10.1016/j.applthermaleng.2013.04.059 [17] T. U. Erkek, A. Gungor, H. Fugmann, A. Morgenstern, and C. Bongs, Performance evaluation of a desiccant coated heat exchanger with two different desiccant materials, Appl. Therm. Eng., 143 (2018) 701-710. https://doi.org/10.1016/j.applthermaleng.2018.06.012. [18] T. Venegas, M. Qu, K. Nawaz, and L. Wang, Critical review and future prospects for desiccant coated heat exchangers: Materials, design, and manufacturing, Renewable Sustainable Energy Rev., 151 (2021) 111531.https://doi.org/10.1016/j.rser.2021.111531. [19] C. Liang, F. Ture, Y. Dai, R. Wang, and T. Ge, Experimental investigation on performance of desiccant coated microchannel heat exchangers under condensation conditions, Energy Build., 231 (2021) 110622. https://doi.org/10.1016/j.enbuild.2020.110622. [20] S. J. Oh, K. Choon Ng, K. Thu, M. Kum Ja, M. R. Islam, W. Chun, et al., Studying the performance of a dehumidifier with adsorbent coated heat exchangers for tropical climate operations, Sci. Technol. Built Environ., 23 (2017) 127-135. DOI: 10.1080/23744731.2016.1218234 [21] P. Vivekh, D. Bui, Y. Wong, M. Kumja, and K. Chua, Performance evaluation of PVA-LiCl coated heat exchangers for next-generation of energy-efficient dehumidification, Appl. Energy., 237 (2019) 733-750. https://doi.org/10.1016/j.apenergy.2019.01.018. [22] R. H. M. Abdelhady, Performance of desiccant heat exchangers with aluminum foam coated or packed with silica gel, Pergamon., 2019. https://doi.org/10.1016/j.applthermaleng.2019.114626 [23] H. Wang, T. Ge, X. Zhang, and Y. Zhao, Experimental investigation on solar powered self-cooled cooling system based on solid desiccant coated heat exchanger, Energy., 96 (2016) 176-186. http://dx.doi.org/10.1016/j.energy.2015.12.067 [24] X. Sun, Y. Dai, T. Ge, Y. Zhao, and R. Wang, Comparison of performance characteristics of desiccant coated air-water heat exchanger with conventional air-water heat exchanger–Experimental and analytical investigation, Energy., 137 (2017) 399-411. doi. 10.1016/j.energy.2017.03.078. [25] Y. Jiang, T. Ge, R. Wang, and L. Hu, Experimental investigation and analysis of composite silica-gel coated fin-tube heat exchangers, Int. J. Refrig., 51 (2015) 169-179.http://dx.doi.org/10.1016/j.ijrefrig.2014.11.012. [26] P. Vivekh, D. Bui, M. Islam, K. Zaw, and K. Chua, Experimental performance evaluation of desiccant coated heat exchangers from a combined first and second law of thermodynamics perspective, Energy Convers. Manage., 207 (2020) 112518. https://doi.org/10.1016/j.enconman.2020.112518.
| ||
|
Statistics Article View: 272 PDF Download: 218 |
||