Simulation the Absorbance Layer CZTS in Solar Cell for Varying Windows and Buffer Layers for Different Electrical Parameters to Achieve Optimum Performance | ||
College Of Basic Education Research Journal | ||
Article 64, Volume 17, Issue 2, July 2021, Pages 1571-1585 PDF (1.89 M) | ||
Document Type: Research Paper | ||
DOI: 10.33899/berj.2021.168558 | ||
Author | ||
BASHAR ALI MOHAMMED* | ||
University of Mosul/Education College of Pure Science/Physics Department | ||
Abstract | ||
Abstract: In this research, we rely on the base cell) MoS2/CZTS/CdS/i-ZnO/ZnO:AL ( which was designed and its outputs are ( Voc=1.1074V, Jsc=29.5356 mA / cm2, FF = 70.29%, =23.00% ). In this study, Windows layers were tested using simulation programmed SCAPS-1D about layers (ZnO, SnO2, ZnO:AL), where ( ZnO:AL ) was selected as window layer, and it was found that the best thickness of the windows layer (0.1 μm). Also the different Buffer layers of the basic solar cell ( CdS, ZnO, ZnS, ZnSe, In2S3 ) were tested, where (ZnS) was selected as the )Buffer layer( where it was found that the best thickness was (0.12 μm). After adopting both the window layers and Buffer layers, the modified cell became )MoS/CZTS/ZnS/i-ZnO/ZnO:AL( the thickness of the Absorption layer was tested, and it was found that the best thickness of the Absorption layer ( CZTS ) was ( 1.5µm ), then the cell output (Voc = 1.0596V, Jsc=28.1390 mA/cm2, FF= 88.41%, =26.37%). | ||
Keywords | ||
Thin Film Solar Cell; ؛CZTS Solar Cell; ؛; ،; ؛SCAPS-1D Computer Software | ||
Statistics Article View: 206 PDF Download: 153 |