Surface Roughness Assessment of the Sandblasted and Acid- Etched Zirconia Ceramic | ||
Al-Rafidain Dental Journal | ||
Article 14, Volume 21, Issue 1, March 2021, Pages 146-157 PDF (548.88 K) | ||
Document Type: Research Paper | ||
DOI: 10.33899/rden.2021.128358.1052 | ||
Authors | ||
Mohammed Riyadh ALobaide* 1; Maan M Nayif2 | ||
1Department of conservative dentistry, college of dentistry, Mosul university, Mosul, Iraq | ||
2Department of Conservative Dentistry, College of Dentistry, Mosul University, Mosul, Iraq. | ||
Abstract | ||
Aims: To evaluate the effect of sandblasting with Al2O3 particle and 30% citric acid etching on the roughness of zirconia ceramic. Materials and Methods: Thirty disks were prepared from partial sintered zirconia (IPS e.max ZirCAD MT blank disk, Ivoclar Vivadent; Schaan, Liechtenstein). Specimens were assigned randomly into three groups based on surface treatment techniques (n=10). Group I zirconia surface was left without surface treatment (control). Group II specimens were subjected to sandblasting with 110 µm Aluminum oxide particles (Al2O3) while the group III surface was treated with citric acid solution 30% for 10 minutes. The surface roughness of the zirconia was investigated using a profilometer. Data were analyzed with one-way ANOVA and Duncan’s tests at 5% level of significance. Results: Sandblasting with AL2O3 110µm significantly increased the surface roughness value of the zirconia surface. Chemical treatment with 30% citric acid did not exhibit any significant changes in comparison to the control group. Conclusions: Sandblasting with AL2O3 increased zirconia surface roughness but acid etching has no effect. | ||
Keywords | ||
Acid etching,,; ,،,؛Roughness,,; ,،,؛Sandblasting,,; ,،,؛Zirconia ceramic | ||
Statistics Article View: 442 PDF Download: 449 |