1.

Experimental Investigation of a Temperature Change inside Pneumatic Cylinder Chambers

Pages 1-4
J. M. Hassan; D. Ghanim; N. B. Hamandy
2.

The Durability of materials and its effect on Architectural Monumentality

Pages 1-13
Maryam Safaa Hussein
3.

Fluidics Thrust Vectoring Using Co-Flow Method

Pages 5-18
Ali Abdul Almuhsen Al-Asady; Ahmed Mujahid Abdullah
4.

The Objective Attitude in Architectural Academic Local Research

Pages 14-26
Suha Hassan Al-Dahwi; Nawfal Joseph Rzqoo; Khalid Abd Al-Wahab
5.

Effect of Different Tool Geometries in Friction Stir Welding of AA 2024-T3 using Design of Experiments

Pages 19-26
Moneer H. Al-Saadi; Sabah Khammass Hussein; Mursal Luaibi Saad
6.

Parametric Optimization of Pulsed Nd:YAG Laser Lap Welding of Stainless Steel ASTM A240/ 316L with Carbon Steel ASTM A570/Gr30

Pages 27-35
Thaier A. Tawfiq
7.

The Effect of Improvement Surrounding Soil on Driven Pile Friction Capacity

Pages 36-48
Mohammed M. Salman; Abdulaziz Abdul Rassol Aziz
8.

Gypseous Soil Improvement by Silicone Oil

Pages 49-58
Ali Nasir Ibrahim; Tom Schanz
9.

Hydrogen Production by Hybrid photovoltaic Thermal System

Pages 50-261
Karima E. Amori; Sameer M. Salman; Zahraa Hashim Kareem
10.

Combined Effects of Sawdust and Building Rubbles as Aggregate on the Concrete

Pages 59-70
Dalia Shakir Atwan
11.

Study on the Catalytic Activity of Cerium/Cadmuim Mixed Oxide Catalysts for the Photo catalytic Degradation of Orange G Dye

Pages 71-79
Atheel Alwash
12.

Characteristics and Properties of Epoxy/Polysulfide Blend Matrix Reinforced by Short Carbon and Glass Fibers

Pages 80-87
Ibtihal A. Mahmood; Mustafa Ziyara Shamukh
13.

Numerical and Experimental Investigations of Heat Transfer Enhancement in a Duct Heater with Different Areas of Vortex Generators

Pages 88-104
Afrah Turki Awad; Kutaeba J. M. Al-Khishali; Dania F. Abbas Aljuboori; Kadhim K.Resan; Ayad M.Takhakh; Hayder Abbas Sallal; Ahmed M. Hameed; Kadhim K. Resan; Khalid M. Eweed; Mujtaba A. Fliayyh; Sadeq H. Bakhy; Mohsin N. Hamzah; Saad Najeeb Shehab; Noor H. Fallooh Al-anbari; Mohammed H. Ali Al-Hayani; Shaymaa M. Mahdi; Saleem Mohammed Obeyed; Israa Shaker Ali; Ali Ehsan; Munqith S. Dawood; Eman Ghadhban Khalil; Halah Hadi Saleh; Zaynab Ibrahim Qasim; Alaa Saadi Abbas; Zahra Ibrahim Qasim; Asmaa Abdul Jabbar Jamel; Hussam K. Risan; Ali Abbar Khleif; Majeed Nemat; Hasan Nemah Khniefer; Audai Hussein Al-Abbas; Ihsan Y. Hussain; Marwah Abdulkareem Jasim; Issam Mohammed Ali; Hind D. R. Albayati; Issam Mohammed Ali; Munther Abdullah Mussa; Mustafa Mahdi Mustafa; Ekhlas Mohammed Fayyedh; Moayed R. Hasan; Ali Falah Mohammed; Ahmed Khalaf Hamoudi; Mohanad J. Mohammed-Ridha; Ali Shihab Ahmed; Nagham Nafea Raoof
14.

Investigate the Microstructure and the Mechanical Properties of Ni-Ti-Cu Shape Memory Alloys

Pages 105-112
Dania F. Abbas Aljuboori; Kadhim K.Resan; Ayad M.Takhakh
15.

The Effect Of The Hybrid Additions on the Bending and Tensile Behavior for the Hybrid Composite Material Reinforced by Short Fibers and the Zeolite Particles by Multifarious Grain Size

Pages 113-119
Hayder Abbas Sallal
16.

Study the Effect of Reverse Rotation Friction Stir Processing on the Dissimilar Aluminum Alloys

Pages 120-128
Ahmed M. Hameed; Kadhim K. Resan; Khalid M. Eweed
17.

Effect of Pin Shape and Rotational Speed on the Mechanical Behaviour and Microstructures of Friction Stir Spot Welding of Aa6061 Aluminum Alloy

Pages 129-139
Mujtaba A. Fliayyh; Sadeq H. Bakhy; Mohsin N. Hamzah
18.

Experimental Study of Free-Convection from Rectangular Fins Array on a Heated Horizontal Plate with Notch Effects

Pages 140-148
Saad Najeeb Shehab
19.

Evaluation Performance of Iterative Algorithms for 3D Image Reconstruction in Cone Beam Geometry

Pages 149-157
Noor H. Fallooh Al-anbari; Mohammed H. Ali Al-Hayani
20.

Investigation and Enhancement Using Different Types of Pipelines for the Servo Hydraulic System with PID Controller Tuned Using Fuzzy Logic

Pages 158-166
Shaymaa M. Mahdi
21.

Treatment of Reused Oil by Thermal Conversion Process

Pages 167-175
Saleem Mohammed Obeyed; Israa Shaker Ali; Ali Ehsan
22.

Detection of Tumor Mass Based on Laser Scanning Imaging

Pages 176-182
Munqith S. Dawood; Eman Ghadhban Khalil; Halah Hadi Saleh
23.

Effect of Filler Content on Properties of Asphaltic Mixtures for Marshall and Superpave Gyratory Compactor

Pages 183-193
Zaynab Ibrahim Qasim; Alaa Saadi Abbas; Zahra Ibrahim Qasim
24.

Effect of Two Sheet Piles In Double Soil Layers on Seepage Properties Under Hydraulic Structure Using SEEP/W Program

Pages 194-205
Asmaa Abdul Jabbar Jamel
25.

Cracking Control due to Early Thermal Movement of Watertight Continuous RC Members

Pages 206-213
Hussam K. Risan
26.

A Comparitive Study of CNC Milling Cutting Path Strategies

Pages 214-221
Ali Abbar Khleif; Majeed Nemat; Hasan Nemah Khniefer
27.

Computational Fluid Dynamics (CFD) Modeling Study of Thermal Performance for Multipurpose Solar Heating System

Pages 222-234
Audai Hussein Al-Abbas
28.

Thermal Performance Enhancement of Phase Change Materials (PCMs) by Using Metal Foams

Pages 235-249
Ihsan Y. Hussain; Marwah Abdulkareem Jasim
29.

Influence of Covering Materials and Shading on the Greenhouse Cooling in Iraq

Pages 262-271
Issam Mohammed Ali; Hind D. R. Albayati
30.

Experimental Investigation of Forced Convection Heat Transfer in Open Cell Copper Fins

Pages 272-280
Issam Mohammed Ali; Munther Abdullah Mussa; Mustafa Mahdi Mustafa
31.

The Combined Effect of Rib with Single Large Eddy Break Up Devices on Flow and Heat Transfer Characteristic of Turbulent Flow in Rectangular Duct

Pages 281-291
Ekhlas Mohammed Fayyedh; Moayed R. Hasan; Ali Falah Mohammed
32.

Optimum Setting of PID Controller using Particle Swarm Optimization for a Position Control System

Pages 292-297
Ahmed Khalaf Hamoudi
33.

Investigation of The Thermodynamic, Kinetic and Equilibrium Parameters of Batch Biosorption of Pb(II), Cu(II), And Ni(II) From Aqueous Phase using Low Cost Biosorbent

Pages 298-310
Mohanad J. Mohammed-Ridha; Ali Shihab Ahmed; Nagham Nafea Raoof


Journal Management System. Powered by ejournalplus.com