EXPERIMENTAL STUDY FOR STAGGERED PERFORATED ARRAY OF PINS LIKE FINS IN A RECTANGULAR AIR CROSS FLOW | ||
Iraqi journal of mechanical and material engineering | ||
Article 1, Volume 14, Issue 2, June 2014, Pages 261-275 | ||
Authors | ||
Ahmed Qasimb; Ali Shakir Baqira; Anmar Adnanb | ||
Abstract | ||
This paper investigated experimentally the friction factor reduction and heat transfer enhancement processes over staggered perforated pin fins in a rectangular channel with air cross flow. The channel had a duct cross section width of 62 mm, cross section depth of 167 mm and duct length of 1200 mm. The experiment covers the following ranges: Reynolds number 28000-113000, and pin fin shapes (solid, horizontal/vertical (HV) perforation and horizontal/vertical/lateral (HLV) perforation). Results show that the Nusselt numbers of pins with horizontal/vertical (HV) perforations are about 11% higher than those for solid pins and with horizontal /vertical/lateral (HLV) perforations are about 21% higher than those for the solid pins.. In addition, experimental results show that pins with horizontal/vertical/lateral (HLV) perforations, have good enhancement of heat transfer in addition to a significant reduction in weight compared with solid pin case performance. | ||
Keywords | ||
Perforated pin fins; Heat sink; Heat transfer enhancement; thermal efficiency; Pressure drop; fin performance and thermal resistance | ||
Statistics Article View: 83 PDF Download: 68 |