Design an Ozone Generator by Using Dielectric Barrier Discharge | ||
| Journal of Al-Nahrain University - Science | ||
| Article 1, Volume 17, Issue 1, March 2014, Pages 89-94 | ||
| Authors | ||
| Hamid H. Al-Jobouri; Hadeel O. Ismaeel | ||
| Abstract | ||
| An Ozone generator was designed according to dielectric barrier discharge (DBD) technique with Oxygen as a feed gas for Ozone generating. The effect of the flow rate on the concentration of the Ozone was studied, the flow rate was varied from 0.6 to 5lit/ min for two values of the gap space between electrodes d= 2 and 4 mm, and two values of the electrode area A= 20 and 36 cm2. Also, the effect of the applied voltage on the concentration of the Ozone was studied, the applied voltage was varied from (1- 9 kV) for the same gap space and electrode area values. It is found that the concentration of Ozone produced increases with increasing voltage, and decreases with increasing flow rate. | ||
| Keywords | ||
| ozone; Dielectric Barrier Discharge DBD; oxygen; non; Thermal plasma | ||
|
Statistics Article View: 88 PDF Download: 42 |
||