Experimental and Numerical Study on Cavitation Effects in Centrifugal Pumps | ||
| Journal of Engineering | ||
| Article 1, Volume 20, Issue 2, February 2014, Pages 73-86 | ||
| Authors | ||
| Ali Abdul Mohsin Hassan; Nabeel Ahmed Kamal | ||
| Abstract | ||
| Experimental and numerical investigations of the centrifugal pump performance at non-cavitating and cavitating flow conditions were carried out in the present study. Experiments were performed by applying a vacuum to a closed-loop system to investigate the effects of the net positive suction head available (NPSHa), flow rate, water temperature and pump speed on the centrifugal pump performance. Accordingly, many of the important parameters concerning cavitation phenomenon were calculated. Also, the noise which is accompanied by cavitation was measured. Numerical analysis was implemented for two phase flow (the water and its vapor) using a 2-D simulation by ANSYS FLUENT software to investigate the internal flow of centrifugal pump under cavitating conditions. It was observed that with decreasing NPSHa, the values of the pump head, flow rate and efficiency initially remain constant, but with further reduction in NPSHa these parameters will decrease. Also, it was found that at 3% head drop the percentage drop of the flow rate is less than 2% whereas the percentage drop of the efficiency is greater than 3%. Numerically, it was noticed that the cavitation regions appear at the leading edge of suction side of the impeller blades which represents the lowest pressure area inside the computational domain of the centrifugal pump. | ||
| Keywords | ||
| Centrifugal pump; cavitation; NPSH; FLUENT; Experiments | ||
|
Statistics Article View: 121 PDF Download: 23 |
||