The Mechanism of Deliberate Jamming On the Broadcast Satellite Service. | ||
| Journal of University of Anbar for Pure Science | ||
| Article 6, Volume 6, Issue 2, August 2012, Pages 14-21 PDF (637.52 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2012.63233 | ||
| Author | ||
| Riyad Mitieb Mahmood* | ||
| University of Technology - Electrical Eng | ||
| Abstract | ||
| A direct broadcast satellite is making maximum efforts to transmission the TV signal from the source to the receiving in the small home earth stations, especially the important events of a widespread public demand. The power and the nature of the television signal affected by losses resulting from the length of the path and the natural noise , thus the signal's loss part of its power at the reception, but the most influential is the possibility of deliberate jamming, thus the signal of reception has loosed completely. So we are in this research analysis of the technical side to transmit the signal from the Earth station to the satellite, which is the line upward and then receive that signal and processed by machines effector inside the satellite and re-sent as a line downward to the receiving stations. The statement of the impact of deliberate jamming on that process by attacking the line upward by the largest power after the completion of the integrated analysis the original signal using sophisticated of high technology equipment. Based on that, we can see the statement of the used method to deliberate jamming on satellite's channels and methods of prevention ,then it used the simulation program (MATLAB) according to the laws relating to communication satellites, taking into account the latitude and longitude and geographic location of ground stations, satellites, sending and receiving. The results were important and productive because they determine the ability and nature of the signal for a private reception with deferent effects. | ||
| Keywords | ||
| Ground stations; Satellite; The path loss; Noise; Geostationary Satellite Orbit; Jamming | ||
| References | ||
|
[1] Kitsuregawa, T. (1990). Advanced Technology in Satellite Communication.
[2] Maral, G. and Bousquet, M. (1993). Satellite Communications System: Systems,Techniques and Technology.
[3] Pritchard, W.L. and Sciulli, J.A. (1986). Satellite Communication Systems Engineering.
[4] Montenbruck, O. and Gill, E. (2000) Satellite Orbits: Models, Methods, Applications Spinger-Verlag, Berlin, Heidelberg, New York.
[5] Sundberg, C.W. (1992). Advanced Methods for Satellite and Deep Space Communications.
[6] ITU (1988). Booklet on national frequency management. Geneva.
[7] Balasubramanian, R.; Miller, M.; 3 ( 2004) ,Pre-distortion techniques and bandwidth efficient modulation for military satellite communications .
[8] Jonathan Higgins, Focal Press, (2004). Introduction to SNG and ENG Microwave.
[9] Capderou, M. and Lyle, S. (translator) (2005) Satellites: Orbits and Missions, Springer-Verlag,France.
[10] Michael O. Kolawole (2002). Satellite Communication Engineering .
[11] MATLAB Simulink for Digital Communication program (2007).
[12] Anil K. Maini. (2010) Second Edition, Satellites and their Applications .
[13] Jonathan Higgins , Focal Press, 2nd Ed. (2007) Satellite Newsgathering.
| ||
|
Statistics Article View: 281 PDF Download: 106 |
||