Effect of Transformation Temperature on Microstructure andMechanical Properties of Bainite | ||
Engineering and Technology Journal | ||
Article 1, Volume 30, Issue 13, July 2012, Pages 2165-2174 PDF (466.47 K) | ||
DOI: 10.30684/etj.30.13.1 | ||
Author | ||
Hala Salman Hasan | ||
Abstract | ||
Fully bainitic microstructure can be obtained by isothermal transformation at temperatures within the range of bainite transformation. Both transformation temperature and time determine the phase fraction, the scale of the resultant microstructure and the carbone content of the retained austenite, which in turn determine the mechanical properties. In this study, the thermomechanical simulator was used to obtained the fully bainitic microstructure for the high carbon alloy steel (0.78%C) at a different bainite transformation temperatures (200 to 350°C) in order to study the effect of the isothermal transformation temperature on the resultant mechanical properties. It has been concluded from the detailed analysis of the microstructure, the dilatometric data and the mechanical properties (hardness and tensile properties) that finer bainite and less retained austenite phase fraction can be obtained by transformation at lower temperatures, and that leads to exceptional mechanical properties (Hardness ≈ 660 HV, and Tensile strength ≈ 2 Gpa). | ||
Keywords | ||
Bainite; Isothermal heat treatment; Kinetics; Superbainite | ||
Statistics Article View: 249 PDF Download: 77 |