Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand | ||
| Anbar Journal of Engineering Sciences | ||
| Article 1, Volume 5, Issue 1, August 2012, Pages 22-30 PDF (240.01 K) | ||
| DOI: 10.37649/aengs.2012.41133 | ||
| Author | ||
| Layla Muhsan Hasan Bdeir | ||
| Abstract | ||
| Some mechanical properties of mortar (compressive strength and hardness) with sawdust replacement of sand were investigated. Cubes of 50 mm × 50 mm were prepared, the compressive strength tests were done for a replacement levels ranging (5, 10, 15, 25, 50, 75) % by volume a reference mix were also prepared for comparison this test was done after 7, 14, and 28 days while hardness test were done after 28 day for a replacement levels (0, 5, 10, 15, 25) % by volume. Result showed that the compressive strength of the specimen were decreased with higher sawdust content, hardness values were decreased slightly in the replacement levels 0, 5, 10 % while the values began to decrease noticeably in the replacement levels 15 and 25 % the hardness values were (59, 57.5, 56, 47.77 , 45.2) N/mm2 respectively A cost analysis was done, this analysis was based on a unit of mortar (1.0 m3) made from conventional materials and a modified concrete made by substituting materials with sand using sawdust | ||
| Keywords | ||
| sawdust; Compressive Strength; Micro Hardness; Lightweight concrete; Waste materials mortar | ||
|
Statistics Article View: 162 PDF Download: 109 |
||