Aِ studing The Effect of Chemical Composition of Workpiece on Built Up Edge Formation And Surface Roughness | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 27, Issue 10, July 2009, Pages 2061-2071 PDF (237.96 K) | ||
| DOI: 10.30684/etj.27.10.12 | ||
| Author | ||
| Saad kariem shather | ||
| Abstract | ||
| the phenomena built-up edge was the unwanted rough edge on cutting tool that is created by workpiece material welding onto the tool during cutting , occurs at the chip/tool interface when multiple materials are machined at low cutting speeds under high compressive stresses, this study involve relation between the chemical composition of workpiece and the built-up edge ( B.U.E ) formation which is generated on cutting tool during machining at dfferent types of low carbon steel using turning machine , experments prove that increasing percentage of carbon on workpiece causes reduction in weight of cutting tool from ( 14.532g to 13.823g ) at cutting speed 40 m/min and 0.10% and 014% carbon also to 12.672g at 0.20% carbon because built – up edge was disappear and surface roughness was improving from the value ( 5.43μm ) at 0.10% carbon and to ( 3.362 μm ) at 0.14% carbon and to (3.543μm) at 0.20% carbon . | ||
| Keywords | ||
| chemical composition; Low Carbon Steel; built; Surface Roughness | ||
|
Statistics Article View: 176 PDF Download: 58 |
||