The Influence Of Bonding Mode and Wire Setting On The Stresses Of Metal Matrix Composite Reinforced with Continuous wire | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 26, Issue 2, February 2008, Pages 139-145 PDF (288.14 K) | ||
| DOI: 10.30684/etj.26.2.3 | ||
| Author | ||
| Basim. Mohammed Fadhel | ||
| Abstract | ||
| This paper deals with the influence of bonding mode and the setting of the reinforcement between matrix and reinforcement for metal matrix composite on the induced stresse and also on the value of the reinforcing A charpy specimen with notch was used as a specimen test for comparison . Analytical model was built via ANSYS 8.1 software with a nonlinear solution based on the elastic –plastic behavior for both phases (matrix and reinforcement).Five miscellaneous cases for bonding mode and the setting of the reinforcement (wire with 1 mm diameter) were used .The results exhibit the eloquent perfect bonding on the value of reinforcing and also the setting (semi-circle) of the reinforcement in the matrix which gave the best reinforcing. | ||
| Keywords | ||
| Metal matrix composites; fiber; ANSYS | ||
|
Statistics Article View: 237 PDF Download: 58 |
||