Removal of Phenolic Compunds from Aqueous Solutions by Adsoption onto Activted Carbons Prepared from Date Stones By Chemical Activation With FeCl3 | ||
| Journal of Engineering | ||
| Article 1, Volume 18, Issue 1, January 2012, Pages 63-77 | ||
| Author | ||
| Samar K. Dhidan | ||
| Abstract | ||
| Activated carbon prepared from date stones by chemical activation with ferric chloride (FAC) was used an adsorbent to remove phenolic compounds such as phenol (Ph) and p-nitro phenol (PNPh) from aqueous solutions. The influence of process variables represented by solution pH value (2-12), adsorbent to adsorbate weight ratio (0.2-1.8), and contact time (30-150 min) on removal percentage and adsorbed amount of Ph and PNPh onto FAC was studied. For PNPh adsorption,( 97.43 %) maximum removal percentage and (48.71 mg/g) adsorbed amount was achieved at (5) solution pH,( 1) adsorbent to adsorbate weight ratio, and (90 min) contact time. While for Ph adsorption, at (4) solution pH, (1.4) absorbent to adsorbate weight ratio, and (120 min) contact time gave maximum removal percentage( 86.55 %) and (43.27 mg/g) adsorbed amount. Equilibrium adsorption data of PNPh and Ph onto FAC were well represented by Langmuir isotherm model, showing maximum adsorbed amounts of (185.84 mg/g) and (159.27 mg/g) for PNPh and Ph, respectively. | ||
| Keywords | ||
| activated carbon; chemical activation; ferric chloride; date stones; phenolic compounds | ||
|
Statistics Article View: 158 PDF Download: 123 |
||