Investment Jute Fiber as Environmental Waste to Reinforcement Polyester Resin, Epoxy Resin and its Mixtures Used in home applications | ||
| Journal of University of Anbar for Pure Science | ||
| Article 27, Volume 17, Issue 2, December 2023, Pages 190-195 PDF (845.8 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2023.141991.1104 | ||
| Authors | ||
| Rasha Alani1; Aya Aljumaili2; Taha alqaisi2; Saad Alani* 2 | ||
| 1Department of Physics, College of Education for Pure Science, University of Anbar, Anbar, Iraq; | ||
| 2Ministry of Education, Anbar Education Directorate, Anbar, Iraq; | ||
| Abstract | ||
| In this paper , hand lay - up method was employed to prepare three models of polymeric materials and their compositions before and after reinforcement with different Volume fractions ( 0.5, 1, 1.5, 2, 2.5, 3 ) %. First group ( G1 ) consists of unsaturated polyester resin reinforced with Jute Fiber which that cut to length ( 5mm ) with Volume fraction that above - mentioned, and the second group ( G2 ) consists of Epoxy resin reinforced with the same fiber, as for the third group ( G3 ) ; consists of polymeric Blend ( 75% Epoxy + 25% Unsaturated polyester resin ) reinforced with the same fiber. Experimental results includes, Tests of Impact Strength and Thermal conductivity. For a different volume fractions of a samples ( all samples ) , the results showed that Impact strength increases with increasing volume fraction while thermal conductivity decreases by increase it. | ||
| Keywords | ||
| Jute Fiber; Polyester Resin; Epoxy Resin; Impact Strength; Thermal Conductivity | ||
| References | ||
|
[1] Hasan M., Khadiza T. K., Nazmol H. (2023). Sustainable ligand-modified based composite material for the selective and effective cadmium(II) capturing from wastewater. Journal of Molecular Liquids. 13(1) : 60-71. doi.org/10.1016/j. molliq. 2022.121125.
[2] Amna. S. Z., Khobab S. (2022). A review of joining techniques for thermoplastic composite materials. Journal of Thermoplastic Materials. 36(8) : 20-23. doi.org/10.1177/08927057221096662.
[3] Muhammad S., Azwar H. (2023). Effect of copper addition on aluminum matrix composite by powder metallurgy method. AIP Conference Proceedings . 2630, 040003. doi.org/10.1063/5.0126201.
[4] Flávia R. B., Francisco R. C. Francisco R.C., Markssuel T. M. , Sergio N. M. , Fabio d. C, Afonso R. G.(2023). A Review of the Use of Coconut Fiber in Cement Composites. Polymers 15(5) : 1309. doi.org/10.3390/polym15051309
[5] Muhammad M. A., Omid H., Aliriza R. (2023). A sustainable cementitious composite reinforced with natural fibers: An experimental and numerical study. Construction and Building Materials. 378 : 131093. doi.org/10.1016/j.conbuildmat.2023.131093.
[6] Jack A. C., Muhammad A., Brett M. (2023). Effects of Fiber Moisture Content on the Mechanical Properties of Jute Reinforced Compressed Earth Composites. Construction and Building Materials. 373 : 130848. doi.org/10.1016/j. conbuildmat.2023.130848
[7] Liping H., Fan X., Junchaw Z. (2022). Optimization of molding process parameters for enhancing mechanical properties of jute fiber reinforced composites. Journal of Reinforced Plastics and Composites. 42(9) : 1099. doi.org/ 10.1177/07316844221130487
[8] Arnas M., Flavio S., Andrio F. Monica V., Giminiano M., Enzo M. (2023). Jute fiber-reinforced mortars: mechanical response and thermal performance. Journal of Building Engineering. 66 : 105888. doi.org/10.1016/j.jobe.2023.105888.
[9] Muhammad A. K. et al. (2023). Effect of Nano-Clay and Jute Varieties on the Structural, Mechanical, and Thermal Properties of Polyester Composite. 20(1) : 3-5. doi.org/10.1080/15440478.2023.2179155 | ||
|
Statistics Article View: 74 PDF Download: 62 |
||