Lateef, H., Ali, S. (2023). Comparison between the Effect of Adding MSGNP and B4C-WC Nanoparticles on the Metallurgical and Mechanical Characterization of Al-7075 Composites Produced by Stir Casting. Alustath, 41(12), 1552-1566. doi: 10.30684/etj.2023.142697.1544
Haneen Lateef; Saad M. Ali. "Comparison between the Effect of Adding MSGNP and B4C-WC Nanoparticles on the Metallurgical and Mechanical Characterization of Al-7075 Composites Produced by Stir Casting". Alustath, 41, 12, 2023, 1552-1566. doi: 10.30684/etj.2023.142697.1544
Lateef, H., Ali, S. (2023). 'Comparison between the Effect of Adding MSGNP and B4C-WC Nanoparticles on the Metallurgical and Mechanical Characterization of Al-7075 Composites Produced by Stir Casting', Alustath, 41(12), pp. 1552-1566. doi: 10.30684/etj.2023.142697.1544
Lateef, H., Ali, S. Comparison between the Effect of Adding MSGNP and B4C-WC Nanoparticles on the Metallurgical and Mechanical Characterization of Al-7075 Composites Produced by Stir Casting. Alustath, 2023; 41(12): 1552-1566. doi: 10.30684/etj.2023.142697.1544

Comparison between the Effect of Adding MSGNP and B4C-WC Nanoparticles on the Metallurgical and Mechanical Characterization of Al-7075 Composites Produced by Stir Casting

Engineering and Technology Journal
Volume 41, Issue 12, December 2023, Pages 1552-1566    PDF (2.91 M)
Document Type: Research Paper
DOI: 10.30684/etj.2023.142697.1544
Authors
Haneen Lateef1; Saad M. Ali* 2
1Production Engineering and Metallurgy Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
2Biomedical Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
Abstract
Metal Matrix Composite (MCC) reveals considerably better properties, such as low density, high tensile strength, hardness, and good resistance to wear compared with every alloy or other metal. The current study concentrated upon the assessment of the properties of aluminum matrix composites (AMCs) synthesis with the Al-7075 as a matrix and the MSGNPs that sieved to (35 nm) at different weight fractions percentages as reinforcements using stir-casting method and compared with Al7075/B4C-WC nanocomposites. These experiments aim to select the appropriate type and percentage of reinforcement particles for producing Al-7075 composites with the best mechanical properties. The mechanical properties, as well as the metallurgical features for analyzing the microstructure and the distribution of (MSGNP, SiC-WC) into the composite alloy specimens, have been studied utilizing the mechanical tests and the Optical Microscopy (OM), Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS), and X-Ray Diffraction (XRD) SEM pictures.  By reviewing the mechanical test results, they manifested that the value of the composite's ultimate strength was enhanced with the additive concentration of nanoglass. The maximum tensile strength was obtained for the sample comprising 4% MSGNP—the composite with 6 wt.% B4C and WC have the highest hardness value, which means the increase of the added composite material beyond 10% will decrease the hardness. The X-ray diffraction (XRD) examination results illustrate the various phases of the two-theta value-generated diffraction patterns for the Al-7075/MSGNP and Al-7075/B4C-WC workpieces materials. These examinations show that the matrix of Al and the clear glass are the two major composite constituents and contain B4C, WC, and aluminum matrix, which are consistent with what was shown by the optical microstructure of the composite. The Al-7075 microstructure analysis also demonstrated a virtuous metallic bonding between the particles of Al and the uniformly dispersed and transparent glass particles at the optimal addition of 8wt%. Such enhancement was ascribed to the reinforcement's sufficiency and the uniform dispersion of MSGNP. Therefore, the addition of 8 wt.% was chosen in the present work. 

Highlights
  • The metallurgical and mechanical properties of an Aluminum-based matrix composite (AMC) are investigated
  • The AMC has an Al-7075 matrix reinforced with 35 nm MSGNPs fabricated by stir casting
  • OM, SEM, EDS, and XRD were used to analyze the microstructure
  • Mechanical testing showed Rockwell hardness, tensile strength, and analysis for the Al 7075/MSGNP composite
  • The alloy Al-7075 with 8wt% MSGNP had the best manufacturing and evaluation results
Keywords
Metal matrix composite; Microscopic slide glass nanoparticles; Boron carbide; Tungsten carbide; Aluminum 7075; Stir casting
References
  1. F. Aynalem, Processing methods and mechanical properties of aluminium matrix composites, Adv. Mater. Sci. Eng., (2020) 1-19. https://doi.org/10.1155/2020/3765791
  2. Sharma, S. Sharma, and D.A. Khanduja, Study on Microstructure of Aluminium Matrix Composites, J. Asian Ceram. Soc., 3 (2015) 240-244 . http://doi.org/10.1016/j.jascer.2015.04.001
  3. L. Anis, R. Ramli and W. Darham, Microstructure and Mechanical Properties Investigation of in situ TiB2 and ZrB2 Reinforced Al- 4Cu Composites, Conf. Ser.: Mater. Sci. Eng., 114 (2016) 1 –5. http://doi.org/10.1088/1757-899X/114/1/012120
  4. H. Korkut, Effect of particulate reinforcement on wear behaviour of aluminium matrix composites, Mater. Sci. Technol. 20 (2004) 73–81. https://doi.org/10.1179/174328413X13789824293542
  5. H. Al-imari, Fabrication and Mechanical Properties of Economic Composite Materials Using Alumimium Scrap and Wasted Glass. 3rd International Conference on Mechanical, Auto- mobile Rob. Eng., 356 (2014) 812 –824.
  6. H. Nuhu, S.S. Jikan, S. Asman, N.Azam, D.M. Zago, and N.Bano, Fabrication and Characterization of Direct Recycled Al -Cu - Cullet Metal Composite, J. Sci. Technol., 9 (2017) 15 –18.
  7. Parghi, and M.S. Alam, Physical and mechanical properties of cementitious composites containing recycled glass powder (RGP) and styrene butadin rubber (SBR), Constr. Build. Mater., 104 (2016) 34-43. http://doi.org/10.1016/J.CONBUILDMAT.2015.12.006
  8. Yamane, and J.D. Mackenzie, Vicker's hardness of glass, J. Non-Cryst. Solids, 15 (1974) 153-164. https://doi.org/10.1016/0022-3093(74)90044-1
  9. Alam, A. Ansari, S. Arif, N. Alam, Mechanical properties and morphology of aluminium metal matrix nanocomposites – stir cast products, Adv. Mater. Process. Technol., 3 (2017) 1–15. http://doi.org/10.1080/2374068X. 2017.1350543
  10. Komai, K. Minoshima, H. Ryoson, Tensile and fatigue fracture behavior and water-environment effects in a SiC-whisker/7075-aluminum composite, Compos. Sci. Technol., 46 (1993) 59–66. https://doi.org/10.1016/0266-3538(93)90081-Q
  11. A. Taha, R. Youness, M. Ibrahim, Evolution of the physical, mechanical and electrical properties of SiC-reinforced Al 6061 composites prepared by stir cast method, Biointerface Res. Appl. Chem., 11 (2021) 8946–8956. https://doi.org/10.33263/BRIAC112.89468956
  12. Ravikumar, K. Kiran, V.S. Sreebalaji, Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide, J. Alloys Compd., 723 (2017) 795–801. http://doi.org/10.1016/j.jallcom.2017.06.309
  13. Ravikumar, K. Kiran, V.S. Sreebalaji, Characterization of mechanical properties of aluminium/tungsten carbide composites, Measurement, 102 (2017) 142–149. https://doi.org/10.1016/j.measurement.2017.01.045
  14. Pugalenthi, M. Jayaraman and V. Subburam, Study of the microstructures and mechanical properties of aluminium hybrid composites with SiC and Al2O3, Mater. Technol., 53 (2019) 49–55. http://doi.org/10.17222/mit.2018.118
  15. Sharma, S. Sharma, D. Khanduja, Production and some properties of Si3N4 reinforced aluminium alloy composites, J. Asian Ceram. Soc., 3 (2015) 352–361. https://doi.org/10.1016/j.jascer.2015.07.002
  16. Mohanavel, K. Rajan, M. Ravichandran, Synthesis, characterization and properties of stir cast AA 6351-aluminium nitride (AlN) composites, J. Mater. Res., 31 (2016) 3824–3831. http://doi.org/10.1557/jmr.2016.460
  17. A. Adediran, K.K. Alaneme, I.O. Oladele, E.T. Akinlabi, Microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husk, Cogent Eng., 8 (2021) 1–16.
  18. Ramakoteswara, N. Ramanaiah., and M.M.M. Sarcar., Fabrication and investigation on Properties of TiC reinforced Al7075 metal matrix composites , Appl. Mech. Mater., 592-594 (2014) 349-353. http://doi.org/10.4028/www.scientific.net/AMM.592-594.349
  19. Singh, A. Chauhan A review of microstructure, mechanical properties and wear behavior of hybrid aluminum matrix composites fabricated via stir casting route, Sādhanā, 44 (2019) 1-18. https://doi.org/10.1007/s12046-018-1025-5
  20. Stojanovic, M. Babic, S. Velickovic, J. Blagojevic Tribological behavior of aluminum hybrid composites stud- ied by application of factorial techniques Tribol. Trans., 59 (2016) 522-529. http://doi.org/10.1080/10402004.2015.1091535
  21. Ramanathan, P.K. Krishnan, R. Muraliraja A review on the production of metal matrix composites through stir casting Furnace design, properties, challenges, and research opportunities, J. Manuf. Process., 42 (2019) 213-245. https://doi.org/10.1016/j.jmapro.2019.04.017
  22. Soltani, R. Azari Khosroshahi, R. Taherzadeh Mousavian, Z.-Y. Jiang, A. Fadavi Boostani, and D. Brabazon, Stir casting process for manufacture of Al–SiC composites, Rare Metals, 36 (2017) 581–590. http://doi.org/10.1007/s12598-015-0565-7
  23. Suhail, M. Alam, and R.U. Rahim, The Effect of Process Parameter on Metal Matrix Composite (Al+4%Cu+5%Sic) By Stir Casting, Int. J. Eng. Trends Appl., 2 (2015) 28-33.
  24. Rajaravi, B. Gobalakrishnan and P. R. Lakshminarayanan, Effect of pouring temperature on cast Al/SiCp and Al/TiB2metal matrix composites, J. Mech. Behav. Mater., 28 (2019) 162-168. https://doi.org/10.1515/jmbm-2019-0018
  25. Tamilanban, T.S. Ravikumar, and S. Kanthasamy, Infuence of Pouring Temperature on Stir Casting of Al/SiC/Mg/Cu Composite, Res. Square, (2021) 1-12. https://doi.org/10.21203/rs.3.rs-314471/v1
  26. Autar, K.K. Mechanics of Composite materials; Taylor & Francis, 2nd edition, New York, NY, USA, 2006.
  27. Amirkhanlou, B. Niroumand: Synthesis and Characterization of 356-SiCp composites by Stir casting and compocasting methods, Trans. Nonferrous. Met. Soc. China, 20 (2010) 788-793. http://doi.org/10.1016/S1003-6326(10)60582-1
  28. C. Anilkumar, H. S. Hebbar, K. S. Ravishankar, Mechanical Properties of Fly Ash Reinforced Aluminium Alloy (Al6061) Composites, Int. J. Mech. Mater Eng., 6 (2011) 41-45. https://idr.nitk.ac.in/jspui/handle/123456789/12390
  29. S. Vasava, D. Singh, A Review on the Manufacturing of Aluminum Metal Matrix Composite by Various Stir Casting Method, Recent Advances in Smart Manufacturing and Materials, Lecture Notes in Mechanical Engineering, Springer, Singapore, (2021). https://doi.org/10.1007/978-981-16-3033-0_32
  30. Shaker, Y. Nawab, A. Saouab, Influence of silica fillers on failure modes of glass/vinyl ester composites under different mechanical loadings, Eng. Fract. Mech., 218 (2019) 10-11. https://doi.org/10.1016/j.engfracmech.2019.106605
  31. Lu, C.Y.H. Lim, W.M. Yeong, Effect of reinforcement on strength of Mg9%Al composite, Compos. struct., 66 (2004) 41-45. https://doi.org/10.1016/j.compstruct.2004.04.019
  32. H. Jaber, G.A. Aziz, A.J. Mohammed and H.J. AL-AIKawi, Electrical conductivity, magnetic and fatigue properties of aluminum matrix composites reinforced with nano-titanium dioxide (TiO2), Nanocomposites, 6 (2020) 47-55. https://doi.org/10.1080/20550324.2020.1769976
  33. M. I. Al-Zuhairi and I. Alshalal, Enhancement of Mechanical Properties of Aluminum Piston Alloy Using Al2O3 Material, 6th Int Eng. Conf. Sustainable Technol. Dev., (2020) 196-200. http://doi.org/10.1109/IEC49899.2020.9122921
  34. A. Al-Salihi, and H.K. Judran, Effect of Al2O3 reinforcement nanoparticles on the tribological behaviour and mechanical properties of Al6061 alloy, AIMS Mat. Sci., 7 (2020) 486–498. http://doi.org/10.3934/matersci.2020.4.486
Statistics
Article View: 65
PDF Download: 83


Journal Management System. Powered by ejournalplus.com