Evaluation of Color Change, Porosity, and FTIR on Modified Heat Cured Acrylic Resin by Zinc Oxide Nanoparticles and CAD/CAM Denture Base Materials | ||
| Al-Rafidain Dental Journal | ||
| Volume 23, Issue 2, September 2023, Pages 408-421 PDF (681.92 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/rdenj.2023.137918.1190 | ||
| Authors | ||
| Mustafa Alshakarchi* 1; Radhwan H Hasan* 2 | ||
| 1Ministry of Health/ Nineveh Health Directorate | ||
| 2Department of Prosthodontic, Mosul University, Dentistry College, Mosul, Iraq | ||
| Abstract | ||
| Aims: the present study aimed to analyze the effects of the incorporation of Zinc Oxide nano-fillers (ZnO NPs) with size (10-30 nm) at one concentration (1%) on color change and porosity and FTIR compared to milled CAD/CAM and conventional denture base materials. Materials and methods: the number of samples were 53 which divided into twenty samples for color change test (control, 1 % ZnO NPs), thirty samples for porosity test and three specimens for FTIR test for (control, 1 % ZnO NPs,CAD/CAM ) . Results: the results demonstrated that there was a significant change in color, with comparable FTIR spectra for the PMMA-ZnO nanocomposite at ZnO nanoparticles (1%), when compared to control and non-significant reduction to porosity test. CAD/CAM denture base showed significant low mean value as compared between control and (1%) zinc oxide group and also showed similar with non- significant difference spectra on FTIR test as compared to the control group. Conclusions: there is unacceptable color change in addition that use of ZnO nanoparticles as dental fillers at 1% by weight of PMMA denture base material and no chemical interaction between zno nanoparticles and CAD/CAM PMMA denture base which has superiority in porosity test. | ||
| Keywords | ||
| color change; FTIR; ZnO nanoparticles | ||
|
Statistics Article View: 124 PDF Download: 94 |
||