Fabrication of Coupling Approach between Flow Injection System – Ion Selective Electrode

Alsultany, Ammar A.; Al-Juboory, Farah K.; Abdallah, Moroog N.; Mohammed, Ebtehal S.

doi:10.32894/kujss.2023.140231.1100

	Fabrication of Coupling Approach between Flow Injection System – Ion Selective Electrode
Kirkuk Journal of Science
Volume 18, Issue 3, September 2023, Pages 32-44 PDF (450.14 K)
Document Type: Review Paper
DOI: 10.32894/kujss.2023.140231.1100
Authors
Ammar A. Alsultany^* ¹; Farah K. Al-Juboory²; Moroog N. Abdallah³; Ebtehal S. Mohammed⁴
¹Precedency of University, University of Diyala, Diyala, Iraq.
²Department of Chemistry, College of Science, University of Kirkuk, Kirkuk, Iraq.
³Biology Department, College of Science, University of Diyala, Diyala, Iraq.
⁴Department of Chemistry, College of Science, University of Diyala, Diyala, Iraq.
Abstract
In real-time monitoring applications where batch calibration approaches cannot be easily performed, the strategy of coupling between FIA and ISEs in FIA-ISEs is ideal for usage. On the other hand, manual manipulation of the solutions continues to be the foundation of current analytical equipment. The automated technique Flow Injection Analysis (FIA), combined with the urgent requirement for automated approaches , a significant influence of contemporary characterization methods are carried out. The flow injection analysis is a method involving clear operating fundamentals that shows promise. And although the electrodes are very selective, they are not free, therefore they link with ion selective (IS) as a detector on Selective Electrodes (ISEs) that are used to monitor some of the most important analyses on clinical laboratory and point of care analyzers.
Keywords
Automated technique; Flow injection analysis FIA; ion selective electrode ISEs; FIA-ISE approach

References
[1] Saez-Plaza, Purificaci ´ on, and et al. An overview of the ´ kjeldahl method of nitrogen determination. part ii. sample preparation, working scale, instrumental finish, and quality control. Critical Reviews in Analytical Chemistry, 43(4): 224–272, 2018. [2] Di Blasio, Gabriele, and et al. Balancing hydraulic flow and fuel injection parameters for low-emission and highefficiency automotive diesel engines. International Journal of Advances and Current Practices in Mobility, 2(2): 638–652, 2019, doi:10.4271/2019-24-0111. [3] Sasaki, K. Milton, R. Tuanne Dias, and Elias AG Zagatto. Flow titrations titration: Theory, types, techniques and uses. hauppauge ny:. Nova Science Publishers, 2018. [4] DA. Skoog, FJ. Holler, and SR. Crouch. Principal of Instrumental Analysis. Sunder College Publisher, New York, 7th edition, 2010. based on zone fluidics. Molecules, 24(21): 3975, 2019, doi:10.3390/molecules24213975. [5] Tzanavaras, D. Paraskevas, Sofia Papadimitriou, and Constantinos K. Zacharis. Automated stopped-flow fluorimetric sensor for biologically active adamantane derivatives based on zone fluidics. Molecules, 24(21): 3975, 2019, doi:10.3390/molecules24213975. [6] A. Pharik K., Patel, C. Patel, and BN. Patel. Flow injection: A new approach in analysis. Journal of Chemical and Pharmaceutical Research, 2: 118–25, 2010, doi:10.1016/0731-7085 (85) 80014-5. [7] A. Kaska, Sheren, Hussein H. Habeeb, and Rafeq A. Khalefa. Performance enhancement of the vertical double pipe heat exchanger by applying of bubbling generation on the shell side. Kirkuk University Journal-Scientific Studies, 13(1): 156–171, 2018, doi:10.32894/kujss.2018.142500. [8] Mohammed K. Aveen, Ali I. Khaleel, and Nawzad N. Ahmed. Construction of new coated carbon electrodes for determination of sildenafil citrate drug. Kirkuk University Journal-Scientific Studies, 15(2): 1–16, 2020, doi:10.32894/kujss.2020.15.2.1. [9] Al Abachi MQ and H. Hadi. Normal and reverse flow injection- spectrophotometric determination of thiamine hydrochloride in pharmaceutical preparations using diazotized metoclopramide. Journal of Pharmaceutical Analysis, 2: 250–355, 2012, doi:10.1016/j.jpha.2012.04.005. [10] R. Patel and KS. Patel. Simple and specific method for flow injection analysis determination of cationc surfactants in environmental and commodity samples. Talanta, 48: 923–31, 1999, doi:10.1016/s0039-9140(98)00306-3. [11] Y. Fajardo, E. Gomez, F. Mas, F. Garcias, V. Cerda, and M. Casas. Multisyringe flow injection analysis of stable and radioactive strontium in samples of environmental interest. Applied Radiation and Isotopes, 61: 273–7, 2004, doi:10.1016/j.apradiso.2004.03.063. [12] Guo J., K. Luo, D. Chen, X. Tan, and Z. Song. A rapid and sensitive method for determination of dibutyl phthalate in wine by flow- injection chemiluminescence analysis. Journal of Food Composition and Analysis, 31: 226–31, 2013, doi:10.1016/j.jfca.2013.06.005. [13] JF. Garcia-Jimenez, MC. Valencia, and LF. CapitanVallvey. Simultaneous determination of antioxidants, preservatives and sweetener additives in food and cosmetics by flow injection analysis coupled to a monolithic column. Analytica Chimica Acta, 594: 226–33, 2007doi:10.1016/j.aca.2007.05.040. [14] Carneiro JMT, Sartini RP, and Zagatto EAG. Spectrophotometric determination of total nitrogen content in plant materials using a flow-injection system with an agcl(s) reactor. Analytica Chimica Acta, 416: 185–90, 2000. [15] Skok, Arina, Yaroslav Bazel, and Andriy Vishnikin. New analytical methods for the determination of sulfur species with microextraction techniques: a review. Journal of Sulfur Chemistry, 43(4): 443–471, 2022, doi:10.1080/17415993.2022.2045294. [16] B. Tang, H. Zhang, and Y. Wang. On-line separation, preconcentration and determination of trace amounts of gold in mineral sample by flow injection catalytic kinetic spectroflourimetry. Analytica Chimica Acta, 525: 305–11, 2004, doi:10.1016/j.aca.2004.08.024. [17] R. Kuroda, Mochizuki T. Fedyshyn, Orest, and et al. Spectroscopic and computational study of a new thiazolylazonaphthol dye 1-[(5-(3-nitrobenzyl)-1, 3-thiazol-2-yl) diazenyl] naphthalen-2-ol. Journal of Molecular Liquids, 304: 112713, 2020, doi:10.1016/j.molliq.2020.112713. [18] D. Michel, M. Casey Gaunt, T. Arnason, and A. El-Aneed. Development and validation of fast and simple flow injection analysis- tandem mass spectroscopy (fia-ms/ms) for the determination of metformin in dog serum. Journal of Pharmaceutical and Biomedical Analysis, 107: 229–35, 2015, doi:10.1016/j.jpba.2014.12.012. [19] Thiruppathi, Murugan, and et al. Simple and costeffective enzymatic detection of cholesterol using flow injection analysis. Analytical Sciences, 36(9): 1119–1124, 2020, doi:10.2116/analsci.20P080. [20] Anwar Sunbul Mustafa. Spectrophotometric determination of chlorpromazine hydrochloride in pharmaceutical preparations by oxidative coupling reaction. Kirkuk University Journal-Scientific Studies, 13(3): 23–36, 2018, doi:10.32894/KUJSS.2018.13.3.3. [21] C. Zhao, C. Shao, M. Li, and K. Jiao. Flow-injection analysis of glucose without enzyme based on electocatalytic oxidation of glucose at a nickel electrode. Talanta, 71: 1769–73, 2007, doi: 10.1016/j.talanta.2006.08.013. [22] HA. Kracke-Helm, L. Brandes, B. Hitzmann, U. Rinas, and K. Schugerl. On-line determination of intercellular β-galatosidase activity in recombinant escherichia coli using flow injection analysis (fia). Journal of Biotechnology, 20: 95–104, 1991, doi:10.1016/0168-1656(91)90038-w. [23] M. Backer, D. Rakowski, A. Poghossian, M. Biselli, P. Wagner, and MJ. Schoning. Chip-based amperometric enzyme sensor system for monitoring of bioprocess by flow-injection analysis. Journal of Biotechnology, 163: 371–6, 2013, doi: 10.1016/j.jbiotec.2012.03.014. [24] JP. Williamson and GL. Emmert. A flow injection analysis system for monitoring silver (i) ion and iodine residuals in recycled water from recovery systems used for spaceflight. Analytica Chimica Acta, 792: 72–8, 2013, doi:10.1016/j.aca.2013.07.011. [25] KM. Pedersen, M. Kummel, and H. Soeberg. Monitoring and control of biological removal of phosphorus and nitrogen by flow- injection analysers in a municipal pilot-scale waste-water treatment plant. Analytica Chimica Acta, 238: 191–9, 1990, doi:10.1016/S0003-2670(00)80537-1. [26] A. J. Bard and L. Faulkner. Electrochemical Methods: Fundamentals and Applications. New York: Wiley, 2000. [27] R.P. Buck and E. Lindner. Recommendations for nomenclature of ion-selective electrodes. Pure and Applied Chemistry, 66(12): 2527–2536, 1994, doi:10.1351/PAC199466122527. [28] Eric Bakker and Yu Qin. Electrochemical sensors. Analytical Chemistry, 78(12): 3965–3984, 2006, doi:10.1021/ac060637m. [29] Hauser and C. Peter. Chapter 2. determination of alkali ions in biological and environmental samples. Springer, 16: 11–25, 2006, doi:10.1007/978-3-319-21756-72. [30] P. Comon, C. Jutten, and Eds. Handbook of blind source separation: independent component analysis and applications. Academic Press, 2010. [31] L. T. Duarte, C. Jutten, and S. Moussaoui. A bayesian nonlinear source separation method for smart ionselective electrode arrays. IEEE Sensors Journal, 9(12): 1763–1771, 2009, doi:10.1109/JSEN.2009.2030707. [32] Blind source separation of post-nonlinear mixtures using evolutionary computation and order statistics, volume 3889. Springer, 2006. [33] E. Pergel., R.E. Gyurcs ´ anyi, K. T ´ oth, and E. Lindner. ´ Picomolar detection limits with current-polarized pb2+ ion-selective membranes. Analytical Chemistry, 73: 4249–4253, 2001, doi:10.1021/ac010094a. [34] E. Bakker and E. Pretsch. The new wave of ion-selective electrodes. Analytical Chemistry, 74: 420A–426A, 2002, doi:10.1016/j.trac.2006.10.006. [35] E. Bakker, P. Buhlmann, and E. Pretsch. Polymer mem- ¨brane ion-selective electrodes–what are the limits? Electroanalysis, 11: 915–933, 1999, doi:10.1002/(SICI)1521-4109(199909)11:13¡915::AID-ELAN915¿3.0.CO;2-J. [36] T. Sokalski, A. Ceresa, T. Zwickl, and E. Pretsch. Large improvement of the lower detection limit of ionselective polymer membrane electrodes. Journal of the American Chemical Society, 119: 11347–11348, 1997,doi:10.1021/ja972932h. [37] E. Bakker, D. Diamond, A. Lewenstam, and E. Pretsch. Lewenstam, a. in comprehensive analytical chemistry. Analytica Chimica Acta, 393: 11–18, 1999, doi:10.1021/ja972932h. [38] E. Bakker and E. Pretsch. Potentiometry at trace levels. Trends in analytical chemistry, 20(1): 11–19, 2001. [39] E. Bakker and E. Pretsch. Modern potentiometry. Angewandte Chemie, 46(30): 5660–5668, 1999, doi:10.1002/anie.200605068. [40] E. Bakker and E. Pretsch. Nanoscale potentiometry. Angewandte Chemie, 27: 612–618, 2008, doi:10.1016/j.trac.2008.04.007. [41] A. Ceresa, E. Bakker, B. Hattendorf, D. Gunther, and E. Pretsch. Potentiometric polymeric membrane electrodes for measurement of environmental samples at trace levels: New requirements for selectivities and measuring protocols, and comparison with icpms. Analytical Chemistry, 73(2): 343–351, 2001, doi:10.1021/ac001034s. [42] E. Pungor and E. Hollos-Rokosinyi. The use of membrane electrodes in the analysis of ionic concentrations. Acta Chimica (Academiae Scientiarum) Hungaricae, 27: 63, 1961. [43] M. S. Frant and JW. Ross. Use of a total ionic strength adjustment buffer for electrode determination of fluoride in water supplies. Analytical Chemistry, 40: 1169, 1968, doi:10.1021/ac60263a005. [44] M. S. Frant and JW. Ross. Calcium-selective electrode with liquid ion exchanger. Science, 56(3780): 1378–9, 1967, doi:10.1126/science.156.3780.1378. [45] Z. Stefanac and W. Simon. Calcium-selective electrode with liquid ion exchanger. Chimia, 20: 1378–9, 1966, doi:10.1126/science.156.3780.1378. [46] G. Horvai and E. Pungor. Comparative study on the precision of potentiometric techniques applied with ion-selective electrodes: Part 1. direct techniques. Analytica Chimica Acta, 113(2): 287–294, 1980, doi:10.1016/S0003-2670(01)93742-0. [47] E. Bakker, P. Buhlmann, and E. Pretsch. Carrier-based ¨ ion-selective electrodes and bulk optodes. 1. general characteristics. Chemical Reviews, 97(8): 3083–3132, 1997, doi:10.1021/cr940394a. [48] P. Buhlmann, E. Pretsch, and E. Bakker. Carrier-based ¨ ion-selective electrodes and bulk optodes. 2. ionophores for potentiometric and optical sensors. Chemical Reviews, 98(4): 15931687, 1998, doi:10.1021/cr970113+. [49] J. Bobacka, A. Ivaska, and A. Lewenstam. Potentiometric ion sensors. Chemical Reviews, 108(2): 329–351, 2008, doi:10.1021/cr068100w [50] Wang Hemin and et al. Alternative coulometric signal readout based on a solid-contact ion-selective electrode for detection of nitrate. Analytica Chimica Acta, 1129: 136–142, 2020, doi:10.1016/j.aca.2020.07.019. [51] Wen. Yizhang and et al. Application of an ammonium ion-selective electrode for the real-time measurement of ammonia nitrogen based on ph and temperature compensation. Measurement, 137: 98–101, 2020, doi:10.1016/j.measurement.2019.01.031. [52] Bondar V. Anna, Valentina M. Keresten, and Konstantin N. Mikhelson. Ionophore-based ion-selective electrodes in non-zero current modes: Mechanistic studies and the possibilities of the analytical application. Journal of Analytical Chemistry, 77(2): 145–154, 2022, doi:10.1134/S1061934822020046. [53] Rajabi Hamid Reza and et al. On-line flow injection solid phase extraction using imprinted polymeric nanobeads for the preconcentration and determination of mercury ions. Chemical Engineering Journal, 259: 330–337, 2022, doi:10.1016/j.cej.2014.08.025. [54] A.K. Covington. Ion Selective Electrode Method. CRC Press, 1st edition, 2018. [55] Rajabi Hamid Reza and et al. Comparison of nessler, phenate, salicylate and ion selective electrode procedures for determination of total ammonia nitrogen in aquaculture. Aquaculture, 450(1): 187–193, 2016, doi:10.1016/j.aquaculture.2015.07.022. [56] Criscuolo Francesca and et al. Highly-stable li+ ionselective electrodes based on noble metal nanostructured layers as solid-contacts. Analytica chimica acta, 1027:22–32, 2018, doi:10.1016/j.aca.2018.04.062. [57] Shao Yuzhou, Yibin Ying, and Jianfeng Ping. Recent advances in solid-contact ion-selective electrodes: Functional materials, transduction mechanisms, and development trends. Chemical Society Reviews, 49(13): 4405–4465, 2020, doi:10.1039/C9CS00587K. [58] Son Jung Eek, Hak Jin Kim, and Tae In Ahn. Hydroponic systems. Plant factory. Academic Press, 2020. [59] Guinovart Tomas and et al. Characterization of a ` new ionophore-based ion-selective electrode for the potentiometric determination of creatinine in urine. Biosensors and Bioelectronics, 87: 587–592, 2017, doi:10.1016/j.bios.2016.08.025. [60] Hao Jie and et al. High antifouling property of ionselective membrane: toward in vivo monitoring of ph change in live brain of rats with membrane-coated carbon fiber electrodes. Analytical chemistry, 88(22): 11238–11243, 2016, doi:10.1021/acs.analchem.6b03854. [61] Nery Emilia Witkowska and Lauro T. Kubota. Integrated, paper-based potentiometric electronic tongue for the analysis of beer and wine. Analytica Chimica Acta, 918: 60–68, 2016, doi:10.1016/j.aca.2016.03.004. [62] Yahyavi Hossein, Massoud Kaykhaii, and Majid Mirmoghaddam. Recent developments in methods of analysis for fluoride determination. Critical Reviews in Analytical Chemistry, 46(2): 106–121, 2016, doi:10.1080/10408347.2014.985814.
Statistics Article View: 97 PDF Download: 73