Jabbar, S., Abdulkader, N., Ahmed, P. (2023). Applying Nanocomposite Coatings to Improve Orthopedic Alloys by Using Multiple Flame Spray. Alustath, 41(6), 870-885. doi: 10.30684/etj.2023.138886.1410
Shahad A. Jabbar; Niveen J. Abdulkader; Payman S. Ahmed. "Applying Nanocomposite Coatings to Improve Orthopedic Alloys by Using Multiple Flame Spray". Alustath, 41, 6, 2023, 870-885. doi: 10.30684/etj.2023.138886.1410
Jabbar, S., Abdulkader, N., Ahmed, P. (2023). 'Applying Nanocomposite Coatings to Improve Orthopedic Alloys by Using Multiple Flame Spray', Alustath, 41(6), pp. 870-885. doi: 10.30684/etj.2023.138886.1410
Jabbar, S., Abdulkader, N., Ahmed, P. Applying Nanocomposite Coatings to Improve Orthopedic Alloys by Using Multiple Flame Spray. Alustath, 2023; 41(6): 870-885. doi: 10.30684/etj.2023.138886.1410

Applying Nanocomposite Coatings to Improve Orthopedic Alloys by Using Multiple Flame Spray

Engineering and Technology Journal
Volume 41, Issue 6, June 2023, Pages 870-885    PDF (2.61 M)
Document Type: Research Paper
DOI: 10.30684/etj.2023.138886.1410
Authors
Shahad A. Jabbar* 1; Niveen J. Abdulkader1; Payman S. Ahmed2
1Materials Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
2Manufacturing & Industrial Engineering Dept., Faculty of Engineering, Koya University, Koya KOY45, Kurdistan Region- F.R.Iraq.
Abstract
Due to their excellent mechanical and biocompatibility characteristics, CoCr-based alloys are frequently employed in orthopaedic implant applications. It is necessary to maximize their general characteristics, corrosion resistance, and ion release. Despite several benefits, coating with torch flame spray has weaker adherence. As a result, powder metallurgy was employed to combine Si and Nb elements with CoCr alloys. CoCrNb and CoCrSi alloys were sprayed with multiple torch flames to apply two different kinds of Nano-coatings (A: 75% HAP+ 25% SiC, and B: 75% Zeolite+ 25% ZrO2). In two samples, alloying elements Nb and Si were added at a concentration of 5 wt.%. Various characterization methods are employed, such as field emission scanning electron microscopy (FESEM) or energy dispersive X-ray spectroscopy (EDS), an ion release test, atomic absorption spectroscopy (AAS), a wear test, corrosion measurement, atomic force microscopy (AFM), and an adhesion strength test. According to the results, coating (type A) and (type B) increase the wear resistance of CoCr alloy. The zeolite+ZrO2 (type B) and HAP+SiC (type A) coating layers act as barriers to the release of Co and Cr ions from CoCr alloys. There were varying degrees of roughness in the coated samples, which resulted in corrosion pitting. According to tensile pull-out tests, the two-torch flame spraying technique provided a stronger bond with the substrate than the single-torch flame spraying technique. In general, CoCrSi coated type B are the best to be implanted where the cytotoxicity is 0% in the human body, thus an excellent biocompatibility.

Highlights
  • CoCrNb and CoCrSi alloys were sprayed with multiple torch flames to apply of Nano-coatings (A: 75% HAP+ 25% SiC, and B: 75% Zeolite+ 25% ZrO2)
  • The zeolite+ZrO2 (type B) and HAP+SiC (type A) coating layers act as barriers to the release of Co and Cr ions from CoCr alloys.
  • CoCrSi coated type B are the best to be implanted where the cytotoxicity is 0% in the human body
Keywords
CoCrNb; CoCrSi; Coating; HAP+SiC; Zeolite+ZrO2
References
  1. B. Nasab, M. R. Hassan, B. Sahari, Metallic biomaterials of knee and hip: A review, Trends Biomater. Artif. Organs, 24 (2010) 69–82.
  2. Maier, P.; Hort, N. Magnesium Alloys for Biomedical Applications; Multidisciplinary Digital Publishing Institute: Basel, Switzerland, 2020.
  3. Zhang, S. Hydroxyapatite Coatings for Biomedical Applications; CRC Press: Boca Raton, FL, USA, 2013.
  4. Priyadarshini, M. Rama Chetan, U. Vijayalakshmi, Bioactive coating as a surface modification technique for biocompatible metallic implants: A review. J. Asian Ceram. Soc., 7) 2019) 397–406. https://doi.org/10.1080/21870764.2019.1669861
  5. Jiang, G. Han, X. Zheng, G.  Chen & P.  Zhu, Characterization and biocompatibility study of hydroxyapatite coating on the surface of titanium alloy. Surf. Coat. Technol., 375 ( 2019) 645–651. https://doi.org/10.1016/j.surfcoat.2019.07.067
  6. Arcos, and M. V. Regí, Sol–gel silica-based biomaterials and bone tissue regeneration, Acta  Biomater, 6 (2010) 2874–2888.  https://doi.org/10.1016/j.actbio.2010.02.012
  7. Gasik, Understanding biomaterial-tissue inter- face quality: combined in vitro evaluation, Sci. Technol. Adv. Mater., 18 (2017) 550–562. https://doi.org/10.1080/14686996.2017.1348872
  8. Ding, S. Tang, B. Yu, Y. Yan, H. Li, J. Wei, and J. Su, In vitro degradability, bioactivity and primary cell responses to bone cements containing  mesoporous magnesium–calcium silicate and calcium sulfate for bone regeneration, J. R. Soc.  Interface, 12 (2015)1-10.  https://doi.org/10.1098/rsif.2015.0779
  9. Wang, H. C. Schröder, M. Wiens, H. Ushijima and W. E. G. Müller, Biosilica and bio-polyphos- phate: applications in biomedicine (bone for- mation), Curr. Opin. Biotechnol., 23 (2012) 570–578. https://doi.org/10.1016/j.copbio.2012.01.018
  10. C. Vasconcelos and M.C. Baretto, Tailoring the Microstructure of Sol–Gel Derived Hydroxyapatite/Zirconia Nanocrystalline Composites, Nanoscale Res. Lett., 6 (2011) 2 . https://doi.org/10.1007/s11671-010-9766-z
  11. Yoshida, K. Hashimato, Y. Toda, S. Udagawa and T. Kanazawa, J. Eur. Ceram. Soc., 26 (2006) 515-518.
  12. Buzimov, A. Y., et al. Effect of mechanical treatment on properties of zeolites with chabazite structure, J. Phys. Conf. Ser., 790 012004 . 2017. http://iopscience.iop.org/1742-6596/790/1/012004  
  13. Yasumori , S. Yanagida and J. Sawada , Preparation of a titania/X-  zeolite/porous glass composite photocatalyst using hydrothermal and drop coating  processes, Molecules, 20 (2015) 2349-2363. https://doi.org/10.3390/molecules20022349
  14. A.  Naji , R. A. Omar , R. Yahya , A. Dabbagh,  Sodalite zeolite as an alternative all-ceramic infiltrating material for alumina and zirconia toughened alumina frameworks, Ceram. Int., 42 (2016) 12253-12261. https://doi.org/10.1016/j.ceramint.2016.04.171
  15. Iqbal et al. Nano-hydroxyapatite reinforced zeolite ZSM composites: A comprehensive study on the structural and in vitro biological properties, Ceram. Int., 42 (2016) 7175-7182.  https://doi.org/10.1016/j.ceramint.2016.01.107
  16. E. Tercero et al., Effect of carbon nanotube and aluminum oxide addition on plasma-sprayed hydroxyapatite coating’s mechanical properties and biocompatibility, J. Mater. Sci. Eng., 29 (2009) 2195–2202. http://dx.doi.org/10.1016/j.msec.2009.05.001
  17. Zhang, L. Pei, H. Li, S. Li, S. Liu, Y. Guo, Preparation and characterization of Na and F co-doped hydroxyapatite coating reinforced by carbon nanotubes and SiC nanoparticles, Mater. Lett., 218 (2018) 161–164. https://doi.org/10.1016/j.matlet.2018.01.158
  18. R. Hosseini, M. Ahangari, M. H. Johar, and S. R. Allahkaram, Optimization of nano HA-SiC coating on AISI 316L medical grade stainless steel via electrophoretic deposition, Mater. Lett., 285 (2021) 129097. http://dx.doi.org/10.1016/j.matlet.2020.129097
  19. Mandal, Ceramics for biomedical applications, Biomed. Eng. Appl. Healthc., (2019) 229–247. http://dx.doi.org/10.1007/978-981-13-3705-5_10
  20. Abdullah and A. Mohammed, Scanning Electron Microscopy ( SEM ): A Review Int. Conf. Hydraul. Pneum. - HERVEX, 77–85, 2018.
  21. Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels, ASTM G108-94 (2015).
  22. M. Dawood, Erosion-Corrosion Behavior of Al-20%Ni-Al2O3 Metal Matrix Composites by Stir Casting, Mater. Sci. Forum., 1002 (2020) 161-174. http://dx.doi.org/10.4028/www.scientific.net/MSF.1002.161
  23. Zdero, L. E. Guenther, and T. C. Gascoyne, Pin-on-Disk Wear Testing of Biomaterials used for Total Joint Replacements, Experimental Methods in Orthopaedic Biomechanics, (2017) 299–311. http://dx.doi.org/10.1016/B978-0-12-803802-4.00019-6
  24. Debdatta R., Recent Advances and Applications of Thermoset Resins 2nd Edition, February 11, 2022.
  25. El Hassanin, G. Quaremba, P. Sammartino, D. Adamo, A. Miniello, and G. Marenzi, Effect of implant surface roughness and macro‐ and micro‐structural composition on wear and metal particles released, Materials, (Basel)., 14 ( 2021) 6800. http://dx.doi.org/10.3390/ma14226800.
  26. Dimić , I. Cvijović-Alagić , M. Rakin , B. Bugarski , Analysis of Metal Ion Release From Biomedical, Metall. Mater. Eng., 19 (2013) 167-176 .
  27. Al-Hassani, F. Al-Hassani, and M. Najim, Effect of polymer coating on the osseointegration of CP-Ti dental implant, AIP Conf. Proc., 1968 , 030022 (2018). https://doi.org/10.1063/1.5039209
  28. Berzins D. and Brantley W., Adverse effects from orthodontic alloys. Elsevier Ltd, 2017.
  29. Domínguez-Trujillo et al., Bioactive coatings on porous titanium for biomedical applications, Surf. Coat. Technol., 349 (2018) 584–592. http://dx.doi.org/10.1016/j.surfcoat.2018.06.037
  30. Akhtari-Zavareh et al., Fundamentals and Applications of Thermal Spray Coating, Can. J. Basic Appl. Sci., 5 (2017) 1-11.
  31. Choi A. H., Ben-Nissan B., Bendavid A., and Latella B., Mechanical behavior and properties of thin films for biomedical applications. Elsevier Ltd, 2016.
  32. W. Siswomihardjo, M. K. Herliansyah, and N. Dinar, Biocompatibility of Metal Alloys as Medical Devices, 2017 5th Int. Conf. Instrument.Commun, Inf. Technol. Biomed. Eng., (ICICI-BME), 2017, 10-12. http://dx.doi.org/10.1109/ICICI-BME.2017.8537714
Statistics
Article View: 94
PDF Download: 159


Journal Management System. Powered by ejournalplus.com