Study and Evaluating the Physical and Chemical Properties of Clay of Injana Formation in Al-Anbar Governorate - Western Iraq for the Purposes Some Ceramic Industries. | ||
| Journal of University of Anbar for Pure Science | ||
| Volume 17, Issue 1, June 2023, Pages 219-228 PDF (951.05 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2023.178928 | ||
| Authors | ||
| Ahmed A. Mansor* 1; Mohammed A. Al-Nuaimy2 | ||
| 1Department of Applied Geology, College of Science, University of Anbar, Anbar,Iraq; | ||
| 21Department of Applied Geology, College of Science, University of Anbar, Iraq | ||
| Abstract | ||
| The clays of Injana formation are exposed in Al-Anbar Governorate-western Iraq. The aims of this study is evaluating the physical and chemical properties etc. and comparing the results with the standard specifications to indicate its suitability to ceramic industries. (13) mixtures were prepared differ from it by additions of different percent of sand and burn in four temperatures (850, 950, 1000, 1100) C° to show what is the best mixture and best burning temperature that lead to results close to standards specifications. The results of physical examinations are range between , Linear shrinkage (-0.5–0.92), Apparent porosity (11.1-35.7), efflorescence (nil to medium), compressive strength (16.1-30) Nt./mm2. The main oxides for study area are range between , SiO2 (36.15-45.10), Al2O3 (8.64-14.05), CaO (17.05-24.79), Fe2O3 (0-7.25), TiO2 (0.69-1.01), K2O (1.61-3.14), Na2O (0.32-2.11), SO3 (0.23-1.32) and Cl (0-0.47). The best burning temperature is 950C°. The engineering test results (Atterberg limit) shows that the clays of study area have super plasticity depending on classification of (Budinkov,1964), i.e. this clays can be formed and take on a plasticity suitable for ceramic industries. By comparing the results of physical properties of fired brick with the Iraqi standard specification No. 25 for year 1988, showing the clays of study area are suitable for brick industry with category class (A) Except the sample G5,G6 are failed for brick industry because using red sand that mixed with clay, which this sand contain the salts that failure the sample.. | ||
| Keywords | ||
| Ceramic industries; Clays; Brick clays; Clastic of Injana formation | ||
|
Supplementary Files
|
||
| References | ||
|
[1] Awadh, S.M. and Al-Owaidi, M.R., 2020. Application of triangles method for quantitative estimation of marl reserve in Euphrates formation, middle of Iraq. The Iraqi Geological Journal, 53 (2A), 35-49.
[2] Kingery, W.D., 1963. Introduction to Ceramics. John Wiley and Sons,Inc., New York,781PP.
[3] Sissakian, V. K. and Mohammed, B. S., 2007 , Stratigraphy, Iraq bulletin of geology and mining, volume special issue , issue1, 51-124.
[4] Jassim, S.Z. & Goff, J.C., 2006.Geology of Iraq. Published by Dolin, Prague and Moravian Museum, Brno, PP: 341.
[5] Sissakian, V. K. and Muhammad, S. M.,1994, Ramadi plate report, Geosurv Iraq, internal report.
[6] Al-Sayab et al., 1982, Geology of Iraq, University of Musul, published by national library, Baghdad, 1982, PP277. (in Arabic) .
[7] Surdashy A. A. & Aqrawi A. M., 2021, Assessment of Clay Deposits Quality from East of Erbil, Kurdistan Region, Iraq for some Ceramic Industries, The Iraqi Geological Journal, 54 (2F), 144-160 .
[8] Bolus, G.M. et al., 2005, report on evaluation of Nahrawan clays for bric industry, GEOSURV Iraq, internal report. (in Arabic) .
[9] Nesse, W.D., 2000. Introduction to mineralogy, oxford university press, 442p.
[10] Ryan, W., 1978. Properties of Ceramic raw materials, 2nd edition. Pergamon Press, Oxford, 113pp.
[11] ASTM Standard D4318, Standard test methods for liquid limit, plastic limit, and plasticity index of soil, https://www.ASTM.org , 12/3/2023 .
[12] Grim, R.E., 1962. Applied Clay Mineralogy, 20, McGraw-Hill, Book Co. Inc. New York , 422PP.
[13]Jamal, Haseeb. "Atterberg's limits”. AboutCivil.Org., https://www.aboutcivil.org/atterberg-limits, 15/2/2023 .
[14] Budinkov, P.P., 1964. The technology of ceramics and refractories, Massachusetts Institute of technology.
[15] Awad, A. M. & Awadh, S. M., 2021, Manufacturing Perforated and Ordinary Bricks Using Injana Claystone Exposed in The Middle of Iraq, Iraq Geological Journal, 54 (1A), 11-22 .
[16] Al-Nuaimy, M. A., 1996, The effect of silica type in the physical and mechanical properties of ceramic bodies used as building materials, unpublished Master Thesis, collage of science, university of Baghdad, 95 PP . (in Arabic) .
[17] Al-Qazaz, D., et al., 2005, Reevaluation of the soil suitable for mud industry, Al-Sowera brick factory. GEOSURV, Iraq. Internal report (Arabic).
[18] Al-Hakeem, Farhad. A., (1998). evaluation of some neogene clays in north of Iraq for the purpose of ceramics, un published Master Thesis, collage of science, university of Baghdad, 100 PP. (in Arabic) .
[19] Selly, R. C., 2000: Applied Sedimentology,
second edition, London, United Kingdom,
523 PP.
[20] Norton, F.H., 1974, element of Ceramics, second edition, Addison- Wesley Publishing Company Inc., 311P .
[21] Iraqi Standard Specification (ISS No.25) , for the year (1993) : Clay Bricks (the other) Central organization for standardization and quality control, Baghdad, Iraq. (In Arabic). | ||
|
Statistics Article View: 343 PDF Download: 122 |
||
