Study the Physical Properties PVT of Polyethylene Glycol usıng the Sımha-Somcynsky Theory | ||
Kirkuk University Journal-Scientific Studies | ||
Article 5, Volume 18, Issue 1, March 2023, Pages 35-43 PDF (289.41 K) | ||
Document Type: Research Paper | ||
DOI: 10.32894/kujss.2022.134839.1066 | ||
Author | ||
Shanay Rajab Hasan* | ||
Department of Pharmacy, Kirkuk Technical Institute, Northern Technical University, Kirkuk, Iraq. | ||
Abstract | ||
In this study, the structure of polyethylene glycol polymer with different molecular weights was investigated, and the physical properties were studied in terms of pressure, volume and temperature using a theory called Simha-Somcynsky (SS). which shows irregular lattice structure in terms of the hole fraction depending on which thermodynamic quantities are expressed in the statistical thermodynamics of polymers. Therefore, it is necessary to determine the hole fraction and occupied site fraction y. Thermodynamic properties and hole fraction were investigated in the range of temperature between 283-450 K, and at a pressure up to 150 MP. Average error and maximum error in specific volume were determined as 0.036% and 0.28%, respectively, as the highest error in peg302. The other important determination was that the polyethylene glycol had glass transition temperatures ranging from 55 to 60 K. | ||
Keywords | ||
Hole fraction; Simha-Somcynsky theory; Lattice cell theory; holemobility; polyethylene glycol; segmental length | ||
References | ||
[1] S. M. Nuri. Extracting the density gradient profile of polyethylene glycol from bulk to surface. Kirkuk University Journal-Scientific Studies, 12(4): 338–351, 2017, doi:10.32894/kujss.2017.132379.
[2] I. Bodurov, T. Yovcheva, Sainov, and S. PMMA. films refractive index modulation via tio2 nanoparticle inclusions and corona poling. Colloid and Polymer Science, 292(11): 3045–3048, 2014, doi:10.1007/s00396-014-3373-y.
[3] Park HE, Lim ST, Laun HM, and Dealy JM. Measurement of pressure coefficient of melt viscosity: drag flow versus capillary flow. Rheologica Acta, 47: 1023–1038, 2008, doi:10.1007/s00397-008-0296-x.
[4] John Wiley and Sons. Handbook of Introduction to Physical Polymer Science. Inc., Hoboken ,New Jersey in Canada, 4th edition, 2006, 10.24237/djps.1402.403B.
[5] R. Cardinaels, Van Puyvelde, and P. Moldenaers. Evaluation and comparison of routes to obtain pressure coefficients from high-pressure capillary rheometry data. Rheologica Acta, 46(4): 507–520, 2007, doi:10.1007/s00397006-0148-5.
[6] F. Sahin, C. Tav, and Yahsi. Linking the viscous and vacancy behavior of mixtures of high-molecular-weight hydrocarbons. International Journal of Thermophysics, 27(5): 1501–1514, 2006, doi:10.1007/s10765-006-00991.
[7] D. Buta and K. F. Freed. Lattice polymers with structured monomers: A monte carlo study of ther- modynamic properties of melts and solutions. Journal of Chemical Physics, 116(24): 10959–10966, 2002, doi:10.1063/1.1478766. [8] A. Sorrentino and R. Pantani. Pressure-dependent viscosity and free volume of atactic and syndiotactic polystyrene. Rheologica Acta, 48(4): 467–478, 2009, doi:10.1007/s00397-009-0348-x. [9] G. Akdeniz, U. Yahsi, and C. Tav. Viscous behavior of ps, pp, and abs in terms of temperature and pressure dependent hole fraction. Journal of Applied Polymer Science, 117(1): 110–113, 2010, doi:10.1002/app.31565.
[10] U. Yahsi and F. Sahin. Linking the viscous and vacancy behavior of high molecular weight hydrocarbons. Rheologica Acta, 43(2): 159–167, 2004, doi:10.1007/s00397003-0330-y.
[11] T. Sedlacek, R. Cermak, B. Hausnerova, M. Zatloukal, A. Boldizar, and P. Saha. On pvt and rheological measurements of polymer melts - correction of the hole fraction - viscosity relationship. International Polymer Processing, 20(3): 286–295, 2005, doi:10.3139/217.1890.
[12] S. K ̈uzeci. Simha-somcynsky ve cahn hilliard kuramlarını kullanarak polimerlerin y ̈uzey serbest hacim derinlik profilinin C ̧ ıkarılması. Doktora Tezi, Marmara ̈Universitesi Fen Bilimleri Enstit ̈us ̈u, pages 35, 2011.
[13] M. Aslan. Statistical Termodynamics of Branched And Dendrimer Macromolecular Structures. PhD thesis, Marmara University ,Istanbul, 2009.
[14] H. Kahl and S. Enders. Calculation of surface properties of pure fluids using density gradient theory and saft-eos. Fluid Phase Equilibria, 172: 27–42, 2000, doi:10.1016/S0378-3812(00)00361-7.
[15] L. A. Utracki and R. Simha. Analytical representation of solutions to lattice-hole theory. Macromolecular Theory and Simulations, 10(1): 17–24, 2001.
[16] S. Walfram. Mathematica. Addison-Wesley Publishing Company. Inc, Redwood City Califronia, 2nd edition, 1991, doi:10.25130/tjps.25.2020.092.
[17] S. C. Chapra and R. P. Canale. Numerical Method for Engineers. McGraw Hill, USA, 6th edition, 2010. | ||
Statistics Article View: 56 PDF Download: 32 |