Heat Transfer Analysis of the Melting Process on Finned Tubes (A Review on performance enhancement) | ||
| Al-Rafidain Engineering Journal (AREJ) | ||
| Article 27, Volume 28, Issue 1, March 2023, Pages 293-299 PDF (789.15 K) | ||
| Document Type: Review Paper | ||
| DOI: 10.33899/rengj.2023.137167.1215 | ||
| Authors | ||
| Noor Jamal Younis1; Omar Mohammad Hamdoon* 1; Ziad Mohammed Majeed1; Mohamad Kharseh2 | ||
| 1Mechanical Engineering Department, Collage of Engineering, University of Mosul, Mosul, Iraq | ||
| 2Mechanical and Industrial Engineering Department, American University of Ras Al Khaimah , Ras al Khaimah, United Arab Emirates | ||
| Abstract | ||
| The performance of thermal systems, like heating and cooling systems, depends on a number of factors such as the geometrical shape, the working fluid used to transfer or store heat, and the operating conditions. Accordingly, many studies concentrated on improving the thermal performance of such systems and raising their thermal efficiency by modifying their geometry or using phase-changing materials. Therefore, this work is reviewing the previous studies that dealt with modifying the geometry, by adding annular or longitudinal fins on the main tube of the heat exchanger, and employing different types of phase change materials. This article also presents the previous scientific articles that investigated the effects of changing the location and the orientation of the fins. For the reviewed studies in this article, it is worth mentioning that the numerical investigations outnumbered the experimental ones as the authors focused on finding the optimal design of the studied thermal systems. Furthermore, the previous studies employed phase-change materials, e.g. fatty acids, waxes, and salts, due to their ability to store energy and reuse it in a wide range of applications. | ||
| Keywords | ||
| Heat exchanger; phase change materials; change fin orientations | ||
| References | ||
|
[1] N. Boulaktout, E. H. Mezaache, and A. Laouer, "Study of Thermal Behavior of a Horizontal Two Fins Annular Tube Heat Exchanger with Melting Phase Change Material: Fins Orientation Effects" pp. 141–151, Apr. 2021. (accessed Jan. 18, 2022).
[2] M. M. Hosseini and A. B. Rahimi, “Heat transfer enhancement in solidification process by change of fins arrangements in a heat exchanger containing phase-change materials,” Int. J. Numer. Methods Heat Fluid Flow, vol. 29, no. 5, pp. 1741–1755, May 2019, doi: 10.1108/HFF-06-2018-0333.
[3] M. Shahid Afridi, A. Anthony, P. Sundaram, and S. Babu, “Experimental comparison of longitudinal and annular fins using PCM for Thermal energy storage,” IOP Conf. Ser. Mater. Sci. Eng., vol. 402, p. 012179, Sep. 2018, doi: 10.1088/1757-899X/402/1/012179.
[4] Kamal Abdel Radi Ismail, Antonio Ba, “modeling and solution of the solidification problem of pcm around a cold cylinder,” Numer. Heat Transfer. Part Appl., vol. 36, no. 1, pp. 95–114, Jul. 1999, doi: 10.1080/104077899274912.
[5] Ismail, K.A.R., Silva, P.D., Lino, F.A.M., and Lago, T.G.S. “Enhancement of Solidification of PCM Around Finned Tubes,” p.6. Postal Code 13083-860, Campinas, SP, Brazil.
[6] K. A. R. Ismail, M. M. Gonçalves, and F. A. M. Lino, “solidification of pcm around a finned tube: modeling and experimental validation,” p.15, 2016.
[7] Y. Yuan, X. Cao, B. Xiang, and Y. Du, “Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage,” Sol. Energy, vol. 136, pp. 365–378, Oct. 2016, doi: 10.1016/j.solener.2016.07.014.
[8] M. J. Zarei, H. Bazai, M. Sharifpur, O. Mahian, and B. Shabani, “The Effects of Fin Parameters on the Solidification of PCMs in a Fin-Enhanced Thermal Energy Storage System,” Energies, vol. 13, no. 1, p. 198, Jan. 2020, doi: 10.3390/en13010198.
[9] Hassan M. S. , Ghalib Y. K. and Mohamed A. S. ,” modeling coupled conduction–convection ice formation on horizontal axially finned and unfinned tubes”, J. Fluids Eng. Dec 2017, 139 (12): 121101.
[10] S. Khaldi, A. Nabil Korti, and S. Abboudi, “Effect of Finned-Tube on the Enhancement of Melting Process of PCM in Eccentric Cylinders,” Mech. Mech. Eng., vol. 22, no. 4, pp. 975–982, Dec. 2018, doi: 10.2478/mme-2018-0077.
[11] S. Mat, A. A. Al-Abidi, K. Sopian, M. Y. Sulaiman, and A. T. Mohammad, “Enhance heat transfer for PCM melting in triplex tube with internal–external fins,” Energy Convers. Manag., vol. 74, pp. 223–236, Oct. 2013, doi: 10.1016/j.enconman.2013.05.003.
[12] B. Fekadu and M. Assaye, “Enhancement of phase change materials melting performance in a rectangular enclosure under different inclination angle of fins,” Case Stud. Therm. Eng., vol. 25, p. 100968, Jun. 2021, doi: 10.1016/j.csite.2021.100968.
[13] M. Bechiri and K. Mansouri, “Study of heat and fluid flow during melting of PCM inside vertical cylindrical tube,” Int. J. Therm. Sci., vol. 135, pp. 235–246, Jan. 2019, doi:10.1016/j.ijthermalsci.2018.09.017.
[14] K. Ermis, A. Erek, and I. Dincer, “Heat transfer analysis of phase change process in a finned-tube thermal energy storage system using artificial neural network,” Int. J. Heat Mass Transfer., vol. 50, no. 15–16, pp. 3163–3175, Jul. 2007, doi:10.1016/j.ijheatmasstransfer.2006.12.017.
[15] D. Bacellar, T. Alam, J. Ling, and V. Aute, “A Study on Computational Cost Reduction of Simulations of Phase-Change Material (PCM) Embedded Heat Exchangers,” p. 10, 2021.
[16] J. Wu, Q. Chen, Y. Zhang, and K. Sun, “Phase change material heat transfer enhancement in latent heat thermal energy storage unit with single fin: Comprehensive effect of position and length,” J. Energy Storage, vol. 42, p. 103101, Oct.2021, doi: 10.1016/j.est.2021.103101.
[17] J. Shao, J. Darkwa, and X. Zhang, “Numerical investigations into thermal performance of phase change emulsion in a fin-and-tube heat exchanger,” Int. J. Low-Carbon Technol., vol. 16, no. 3, pp. 998–1007, Sep. 2021, doi: 10.1093/ijlct/ctab025.
[18] X.Q. Zhai , X.W. Cheng, C. Wang, R.Z. Wang, "Experimental investigation and performance analysis of a fin tube phase change cold storage unit for high temperature cooling application", 2014.
[19] K. A. R. Ismail and F. A. M. Lino, “Experimental study on ice formation around finned tubes,” vol. 3, no. 8, p. 5, 2016.
[20] L. Zhongliang , S. Xuan , M. Chongfang , "Experimental investigations on the characteristics of melting processes of stearic acid in an annulus and its thermal conductivity enhancement by fins"
[21] G. Dogkas, J. Konstantaras, M. K. Koukou, V. N. Stathopoulos, L. Coelho, and A. Rebola, “Evaluating a prototype compact thermal energy storage tank using paraffin-based phase change material for domestic hot water production,” E3S Web Conf., vol. 116, p. 00016, 2019, doi: 10.1051/e3sconf/201911600016.
[22] Z. Niu, J. Yu, X. Cui, X. Yang, Y. Sun, and J. Yan, “Experimental investigations on the thermal energy storage performance of shell and tube unit with composite phase change materials,” Energy Procedia, vol. 158, pp. 4889–4896, Feb. 2019, doi: 10.1016/j.egypro.2019.01.704. | ||
|
Statistics Article View: 216 PDF Download: 260 |
||