Image Processing Evaluation of LSP Effect on the Corrosion Rate for the 304 Alloy

Salman, Raghad N.; Al-azawi, Razi J; Kadhim, A.

doi:10.30684/etj.2023.136032.1294

	Image Processing Evaluation of LSP Effect on the Corrosion Rate for the 304 Alloy
Engineering and Technology Journal
Article 2, Volume 41, Issue 8, August 2023, Pages 1058-1067 PDF (1.1 M)
Document Type: Research Paper
DOI: 10.30684/etj.2023.136032.1294
Authors
Raghad N. Salman^* ¹; Razi J Al-azawi²; A. Kadhim¹
¹Laser and Optoelectronic Engineering Department, University of Technology-, Baghdad, Iraq.
²Laser and Optoelectronic Engineering Department, University of Technology-, Baghdad, Iraq
Abstract
The purpose of the study is to inhibit the corrosion rate using the (LSP) laser shock processing technology with an ND-YAG laser utilizing the Q-switched technique with a wavelength of 1046 nm for stainless steel 304 alloy. Laser shock processing (LSP) is a novel surface treatment approach for strengthening metal materials that use a high peak power, a brief pulse, and cold hardening. The laser parameters’ effect includes laser pulse energy and pulse repetition rate on the surface properties. The qualities of sample surfaces were investigated, including surface roughness and micro-hardness. The X-ray fluorescence technique was used to analyze the chemical composition of this alloy. The corrosion rate was measured using the polarization method. In particular, pitting corrosion was the option we picked. According to the findings, laser shock processing appears to considerably boost the micro-hardness of the LSP-treated sample. The corrosion causes a decrease in the rate. The result revealed that the corrosion current density was decreased, and the corrosion potential was shifted when the laser pulse energy and the pulse repetition rate were increased. When the laser energy was 920 mj and the pulse repetition rate was 6 Hz, we discovered the lowest rate of corrosion. Digital images are usually achieved by changing continuous signals to digital format. Many factors can affect the quality of an image, such as knowledge requirements, causing noise, low contrast, and badly-defined boundaries, among others. Specifically, we compared the results with those of the image processing.
Highlights
The micro-hardness was increased by 49% and the surface roughness by more than ten folds. The rate of corrosion was decreased by 93.45% when using laser pulses as corrosion inhibitors with an energy of 920 mJ and pulse repetition of 6 Hz. The results were compared with the image processing.
Keywords
Laser Shock Processing; Micro Hardness; Surface Roughness; Corrosion Inhibitor; Image Processing

References
[1] F. Padilha, A., R.Rios, P., Decomposition of austenite in austenitic stainless steels (Review). ISIJ International, 42 (2002) 325-337. [2] J.R. Davies, Surface Engineering for Corrosion and Wear Resistance, ASM International, 2001. [3] G.V. Redkina, A.S. Sergienko and Yu.I. Kuznetsov, Hydrophobic and anticorrosion properties of thin phosphonate–siloxane films formed on a laser textured zinc surface, Int. J. Corros. Scale Inhib., 9 (2020) 1550–1563. doi:10.17675/2305-6894-2020-9-4-23 [4] A.I. Biryukov, O.A. Kozaderov, R.G. Galin, D.A. Zakharyevich and V.E. Zhivulin, Details of the mechanism of dissolution of iron–zinc coatings based on the δ-phase in acidic media, Int. J. Corros. Scale Inhib., 9 (2020) 1477–1489. https://doi: 10.17675/2305-6894-2020-9-4-18 [5] A. Kadhim, R.S. Jawad, N.H. Numan and R.J. Al-Azawi, Determination the wear rate by using XRF technique for Kovar alloy under lubricated condition. Power 30 (2017): 17mA.‏ [6] M. Hanoon, D.S. Zinad, A.M. Resen and A.A. Al-Amiery, Gravimetrical and surface morphology studies of corrosion inhibition effects of a 4-amino antipyrine derivative on mild steel in a corrosive solution, Int. J. Corros. Scale Inhib., 9 (2020) 953–966.doi: 10.17675/2305-6894-2020-9-3-10. [7] A.A. Al-Amiery, A.A.H. Kadhum, A.B. Mohamad and S. Junaedi, A novel hydrazinecarbothioamide as a potential corrosion inhibitor for mild steel in HCl, Materials, 6 (2013) 1420–1431. doi: 10.3390/ma6041420. [8] S. Sathyajith, S. Kalainathan, and S. Swaroop, Laser peening without coating on aluminum alloy Al-6061-T6 using low energy Nd: YAG laser. Optics & Laser Techno 45 (2013) 389-394. [9] S. H. Abbas, Effect of hardness on wear resistance of steel. Ph.D. diss., M. Sc. Thesis, University of Technology, 2001. [10] A. M. Mostafa, M. F. Hameed, and S. S. Obayya, Effect of laser shock peening on the hardness of AL-7075 alloy, J. King Saud Univ. - Sci., 2017.doi.org/10.1016/j.jksus.2017.07.012 [11] D.M. Jamil, A.K. Al-Okbi, M.M. Hanon, K.S. Rida, A.F. Alkaim, A. A. Al- Amiery.A.Kadhim, A.A.H Kadhum, Carbethoxythiazole corrosion inhibitor: As an experimentally model and DFT theory. J. Eng. Appl. Sci. 11 (2018) 3952-3959. doi: 10.36478/jeasci.2018.3952.3959 [12] D. A .Mohammed, A.Kadhim, M. A .Fakhri, The enhancement of the corrosion protection of 304 stainless steel using Al₂O₃ films by PLD method. AIP Conf. Proc. 1,2018, 20014. doi.org/10.1063/1.5080827 [13] A. Kadhim, 1 A.A. Al-Amiery, 2 * R. Alazawi, 1 M.K.S. Al-Ghezi2 and R.H. Abass , Corrosion inhibitors. A review. Int. J. Corros. Scale Inhib., 10 (2021) 54–67. doi: 10.17675/2305-6894-2021-10-1-3 [14] H., Peregrina-Barreto, et al. Automatic grain size determination in microstructures using image processing. Measurement. 46 (2013) 249-258.‏ doi.org/10.1016/j.measurement.2012.06.012 [15] G. LORANG et al. Chemical composition of passive films on AISI 304 stainless steel. J. of the electrochemical society, 141 (1994) 3347.‏ doi: 10.1149/1.2059338 [16] K. MUSZKA, J. MAJTA, Ł. BIENIAS, Effect of grain refinement on mechanical properties of microalloyed steels. Metallurgy and foundry engineering, 32, 2006, 87-97.‏ [17] Z. Wang, Z. Xiaoyan ,H. . Weiling , Parameters and surface performance of laser removal of rust layer on A3 steel. Surface and Coatings Technology .166 (2003) 10-16.‏ doi.org/10.1016/S0257-8972(02)00736-3 [18] J. Silcock and G. Willoughby.Proceedings of the Conference on Creep strength in Steel and High-Temperature Alloys, The Metals Society, London, 2001. [19] J. Kokavec, Z. Wu, J. C. Sherwin, A. J. Ang, and G. S. Ang,. Nd: YAG laser vitreolysis versus pars plana vitrectomy for vitreous floaters, The Cochrane Library (2007). [20] J. D.Majumdaret al. Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy. Mater. Sci. Eng.: A, 361 (2003) 119-129.‏ doi.org/10.1016/S0921-5093(03)00519-7 [21] D.A. Mohammed, M. A. Fakhri, A. Kadhim, Reduction The Corrosion Rate Of 304 Stainless Steel Using Pulsed Laser Shock Penning Method. In: IOP Conference Series: Materials Science And Engineering. IOP Publishing, 567, 2018, 012162.‏ doi:10.1088/1757-899X/454/1/012162
Statistics Article View: 285 PDF Download: 304