State-of-the-art for Strengthening and Rehabilitating Structural Beams Using Carbon Fiber Reinforced Polymers Configurations (A Review) | ||
| Al-Rafidain Engineering Journal (AREJ) | ||
| Article 5, Volume 27, Issue 2, September 2022, Pages 49-59 PDF (1.08 M) | ||
| Document Type: Review Paper | ||
| DOI: 10.33899/rengj.2022.133019.1162 | ||
| Authors | ||
| Islam Abdullah Aziz* 1; Khalaf Ibrahem Mohammed2 | ||
| 1Mechatronics Engineering Department, College of Engineering, University of Mosul, Mosul, Iraq | ||
| 2Civil Engineering Department, College of Engineering, University of Mosul, Mosul, Iraq | ||
| Abstract | ||
| The technique of using carbon polymer fibers to strengthen and rehabilitate structural beams considered one of the modern techniques that have proven its effectiveness in various civil engineering projects. From this point of view, this review came to clarify the practical benefit of using this technology to inform researchers and workers in the construction sector about it and to provide modern sources for those wishing to conduct More researches in the field of strengthening and rehabilitating concrete, iron and composite structural beams and highlighting the studies that dealt with flexural, shear and torsion resistance of beams and reinforced with carbon polymer fibers externally or internally . | ||
| Keywords | ||
| Carbon Fiber; Flexure; shear; Concrete beams; Composite beams | ||
| References | ||
|
8-المصادر [1] N. A. Ragab, "Strengtheing of Steel-Concrete Composite Girders Using Various Advanced Composite Matirals", M.Sc.,Thesis, University of Calgargy, Alberta, 2007.
[2] D. Duthinh and M. Starnes, "Strength and Ductlity of Concrete Beams Reinforced with Carbon FRP and Steel", National Institute of Standards and Technology ,Nistir 6830, pp.1-16, 2001.
3]] M. Tavakkolizadeh and H. Saadatmanesh, "Strengthening of Steel-Concrete Composite Girder Using Carbon Fiber Reinforced Polymers Sheets", Journal of Structral Engineering, ASCE, Vol. 129, No.1, January 1, pp.30-40, 2003.
4]] J. G. Teng, J.F. Chen, S.T. Smith and L. Lam, "FRP Strengthened RC Structures", John Wiley&Sons, England, 2002.
5]] E. Fitzer, J.L. Figuciredo, C.A. Bernard, R.T.K. Baker and K.J. Huttinger, "In Carbon Fibers Filments and Composites", Kluwor Academic Dordrecht, pp3-41, 2000.
6]] A. Carolin, "Carbon Fiber Reinforced Polymers for Stregthening of Structural Elements", Ph.D.Thesis ,University of Lulea, Sweden, pp.194, 2003.
[7] M. Lu and Q. Shi, "The Bend Stiffness of Crane Beam Strengthened with CFRP under Monotonic and Fatigue Load Condition", International Journal of Nonlinear Science, Vol. 4, pp. 44-51, 2007.
[8] A.L. Gamino and T.N. Bittencourt , "Reinforced Concrete Beams Strengthened With CFRP: Experimental Analytical and Numerical Approaches", FRPRCS-8, University of Patras, Greece, Vol.3, No.2, pp.1-9, July 2007.
[9] R.Y. Joseph , S.P. Gross, , D.W. Dinehart and J.J. Mildenberg, "Flexural Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Strips", ACI Structural Journal, Vol. 104, No. 4, pp. 44-51, 2007.
]10] Q.F. Hassan, "Behavior of CFRP Strengthened Reinforcement Concrete Beams Under Cyclic Loading", Doctoral Thesis Department of Civil Engineering, Nahrain University, Baghdad, Iraq, pp.180, 2007.
[11] M. AL-Sefy, M. Elafandy and A.A. Abdelrahman, "Strengthening of RC continuous Slabs Using Externally Bonded Prestressed CFRP Laminates", Civil Engineering Research Magazine, Vol.38 Issue:1, 2016.
[12] M.A. Mashrei and A. Sultan, " Flexural Strengthening of Reinforced Concrete Beams Using Carbon Fiber Reinforced Polymer (CFRP)Sheets with Grooves", Latin American Solids and Structures Journal, Vol.16, Issue:4, 2019.
[13] N. F. Grace , A.K. Soliman , G. Abdel-Sayed and K.R. Saleh, "Behavior and ductility of simple and continuous FRP reinforced beams", Journal of composites for construction, Vol. 2, No.4, pp.186-194, 1998.
[14] A. Li , J. Assih and Y. Delmas, " Shear strengthening of RC beams with externally bonded CFRP sheets", Journal of structural ngineering, Vol. 127, No. 4, pp. 374- 380, 2001.
[15] C. Deniaud and J.J.R. Cheng, "Shear behavior of reinforced concrete T-beams with externally bonded fiber-reinforced polymer sheets", ACI Structural Journal, Vol. 98, No. 3, pp.386-494, 2001.
[16] C. Pellegrino and C. Modena, "Fiber reinforced polymer shear strengthening of reinforced concrete beams with transverse steel reinforcement", Journal of composite for construction, Vol. 6, No.2, pp.104-111, 2002.
[17] O. Buyukozturk , O. Gunes , E. Karaca , "Characterization and modeling of debonding in RC beams strengthening with FRP composites", 15th ASCE Engineering Mechanics Conference , Columbia University, pp.1-8, 2002.
[18] F. Micelli, R. Annaiah and A. Nanni ," Strengthening of short shear span reinforced concrete T joists with Fiber-Reinforced plastic composites", Journal of composite for construction, Vol.6, No.4, pp.264-271, 2002.
[19] Y. Murad, " The Influence of CFRP Orientation Angle on the Shear Strength of RC Beams", The Open Construction and Building Technology Journal, Vol.12, pp 269-281, 2018.
[20] H. H. Mahhana , R.A. Hawileh and J.A. Abdullah," Shear Strengthening of Reinforced Concrete Beams Using CFRP Wraps", Procedia Structural Integrity Journal, Vol.17, pp214–221, 2019.
[21] M. L. Abd, "Shear Behavior of RC Beams Strengthend By CFRP Srips",Journal of applied Engineering Science, Vol.8, Issue:1, pp.250-258, 2021.
[22] M. R. Mohammad, M.J. Fadaee and H.R Ronagh “Improving Torsional Behaviour of Reinforced Concrete Beams Strengthened with Carbon Fiber Reinforced Polymer Composite,” Iranian Polymer Journal, Vol.18, No.4, pp. 315-327, 2009.
[23] K.I. Mohammad and B.J. Al-Sulayfani, " Torsional Strengthening of RC Beams with CFRP Wrap ", Tikrit Journal of Engineering Sciences, Vol.20 Issue:3, pp.1-9, 2013.
24]] A.A.S. Shaat, "Structural Behavior of Steel Columns and Steel-Concrete Composite Girders Retrofitted Using CFRP", Ph.D Dissertation,Queen University, 2007.
25]] H. E.M. Sllam, A.A.M. Badawy, A.M. Saba, "Flexure Behavior of Strengthend Steel-Concrete Composite Beams By Various Plating Methods", Journal of Construction Steel Research, pp. 1081-1087, 2009.
26]] A. F. Kadhum, "Structural Behavior for Short Span Composite Beams Strengthend By CFRP Sheets ", Ph.D.Thesis, University of Technology, Iraq, 2009.
[27] B. J. Al-Sulayfani and I.A. Aziz, "Behavior of Composite Beams (Steel-Concrete) Strengthed BY CFRP Sheets Under Repeated Loading", AL-Rafdain Engineering Journal, Vol.21, Issue:2, pp.12-26, 2013.
[28] M.S. Mosavi and S.A. Nik, " Strength of (Steel-Concrete) Composite Girder Using CFRP Plates", Indian Academy of Scinces, Vol.40, Issue:1, pp.249-261, 2015.
[29] M. H. Makhlouf, " Strengthening of Composite Steel-Concrete Beams Openings by Adopting Different Reinforcement Methods", Advances in Research Journal, Vol. 19, No. 2, pp 1-17, 2019.
[30] M. Subhani, R. AL-Ameri and M. I. Kabir ," Strengthening of steel-concrete composite beams with composite slab", Steel and Composite Structures Journal, Vol. 34, No. 1, pp 91-105, 2020.
31]] B.M. Phares , T.J. Wipf and F.W. Klaiber , A. Abu-Hawash and Y. Lee, " Strengthening of Steel Girder Bridges Using FRP", Proceed of the 2003 Mid-Continet Transportation Research Symposium, Ames, Iowa, www.iowadot.gov, August 2003.
32]] K. Normashiri, M. Jumaat and N.h. Sulong, “Investigation onend anchoring of CFRP Strenthened Steel I-beams”, International Journal of the Physical Sciences, Vol.5, Issue 9, pp.1360-1371, 2010.
33]] K. Normashiri, M. Jumaat and N.h. Sulong, “Shear Strengthening of Steel I-beam by Using CFRP Strips”, Scientic Research and Essays, Vol.5, Issue16, pp.2155-2168, 2010.
[34] S.A. AL-Ridha, F.A. Atshan, S.K. Mahmoud and K.Q. Hameed, "Effect of Strengthening of Steel Beams with Variable length by using carbon fiber", Journal of Engineering, Vol.2019.
[35] V. P. Faikha, N. Ramesh, S. Shilpa, S. Nassar and A.A. Kunju, "Flextural Strengthening of steel beams using CFRP sheets", International Research Journal of Engineering and Technology (IRJET),Vol.6 Issue:5, 2019.
[36] G. M. EL-Mahdy, " Strengthening of Corroded Steel Structures Using CFRP", Housing and building National Research Center, 2019.
[37] P.R. Jagtab, and S.M. Pore," Shear Strengthening Of Steel Beam With Cfrp Composites", International Journal of Scientific & Technology Research, Vol. 9, ISSUE 2, 2020.
[38] N. F. Grace , G.A. Sayed , A.K. Soliman and K.R. Saleh, "Strengthening reinforced concrete beams using fiber Reinforced polymer (FRP) laminate", ACI Structural Journal, Vol. 96, No. 5, pp. 865-874, 2003.
[39] O. Buyukozturk and B. Hearing , "Failure behavior of Precracked concrete beams retrofitted with FRP", Journal of Composites for Construction , Vol. 13, No. 4, pp. 138-144, 2004.
[40] A. Abdel Hamid and H. Elshafie , " Retrofitting of reinforced Concrete beams using advanced composite overlayers", Cement And Concrete Composites, Vol. 19, No. 8, pp.18-29, 2004.
[41] C. Magureanu , B. Heghes and A. Chiorean, "Strengthening with Carbon Fibers Experimental Study", FRPRCS-8, University of Patras, Greece, Vol. 3, No. 13, pp.1-6, 2007.
[42] B.J. Mohammed and B.A. Muhaiddin, "Effect of Externally Bonded strips of Polymer Fiber on the Shear Strength of RC Beam", Kirkuk University Journal, Vol.5, Issue:1, 2010.
[43] G. Adnmantis, S. Danai and K. Chris," Application of X-Shaped CFRP Ropes for Structural Upgrading of Reinforced Concrete Beam–Column Joints under Cyclic Loading–ExperimentalStudy", https://www.mdpi.com/journal/fibers.
[44] P. Kumar, S. Bishnoi and B. Bhattach," Influence of CFRP Strand Sheet on Flexural Strengthening of Reinforced Concrete Beam", Journal of Advanced Concrete Technology ,Vol. 18, pp778-793, 2020. | ||
|
Statistics Article View: 375 PDF Download: 283 |
||