Effect of V-Shape Twisted Jaw Turbulators on Thermal Performance of Tube heat exchanger: An Experimental Study | ||
| Engineering and Technology Journal | ||
| Article 4, Volume 36, 11A, November 2018, Pages 1158-1164 PDF (1.15 M) | ||
| DOI: 10.30684/etj.36.11A.4 | ||
| Authors | ||
| Akram H. Abed1; Nassr F. Hussein* 2; Abdulmunem R. Abdulmunem1 | ||
| 1Electro-Mechanical Eng. Dept., University of Technology, Baghdad, Iraq. | ||
| 2Electro-mechanical Eng. Dept., University of Technology, Baghdad, Iraq. | ||
| Abstract | ||
| The main purpose of the present investigation is enhancing heat transfer rate in a tube heat exchanger by using V-shape twisted Jaws. The air is used as a working fluid and pumped through the test section with different values of Reynolds number (6000 - 19500), while the heat flux has been selected as a constant boundary condition around the tube section. In this study, two type of twisted jaw turbulators are used with two twisted ratio (TR= 2 & 4) as well as, the effect of using different numbers of turbulators (N= 6, 8 and 10) inside test section with equal distances between pieces are studied. The results indicated that, using augmentations with TR=2 gives better heat transfer rate and thermal performance factor comparing with the other case TR=4. The maximum rate of heat transfer is achieved in case of N=10 by an increased 160.29% for TR=2 and 102% for TR=4 comparing with plain tube case. In addition, results show that the values of thermal performance factor exceed the unity and shows uptrend behavior with rising numbers of turbulators indicating to feasibility of using these turbulators practically. | ||
| Keywords | ||
| Tube heat exchanger; Twisted Jaws turbulators; Thermal performance factor | ||
|
Statistics Article View: 131 PDF Download: 55 |
||