Effect of Changing Running Capacitor on Performance of a Single–Phase Induction Motor | ||
Kerbala Journal for Engineering Sciences | ||
Article 2, Volume 2, Issue 2, June 2022, Pages 96-107 PDF (755.65 K) | ||
Document Type: Research Article | ||
Authors | ||
Marwa Dawood* ; Amer M. Ali | ||
Department of Electrical Engineering, College of Engineering, Mustansiriyah University, Baghdad, Iraq. | ||
Abstract | ||
Single-phase induction motors are used in multiple applications in whichhaving the correct value of the capacitor linked to auxiliary winding allows the motor to work effectively. The current study used finite element analysis based on Magnet software to investigate the effect of changing the running capacitor on the performance of a single-phase squirrel cage induction motor with non-uniform stator slots, as well as using AutoCAD to model the stator due to its asymmetrical slots. The design documentation for a 0.5 hp, 36 stator slots, and 48 rotor bars, 25 µF, four-pole tested model are used to simulate the motor. The precision of model outcomes is confirmed successfully by comparing its outcomes of rated current and torque with motor nameplate data. The effect of changing the running capacitor on the performance of a single-phase induction motor is discussed in this study. To demonstrate the simulation's versatility in motor design, the auxiliary branch capacitor was modified (increasing and decreasing) and the effect of each instance on the motor's performance was investigated. | ||
Keywords | ||
Single-phase induction motor; FEM; Magnet Software | ||
References | ||
[1] C. B. Rasmussen and T. J. E. Miller, “Revolving-field polygon technique for performance prediction of single-phase induction motors,” IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1300–1306, 2003.
[2] A. Leicht and K. Makowski, “Analysis of a single-phase capacitor induction motor operating at two power line frequencies,” Arch. Electr. Eng., vol. 61, no. 2, pp. 251–266, 2012.
[3] V. Verma, P. Pant, and B. Singh, “Simulation of a single-phase induction motor with dynamic capacitor for maximum torque operation,” in 2008 Joint International Conference on Power System Technology and IEEE Power India Conference, 2008, pp. 1–6.
[4] B. L. Theraja, A textbook of electrical technology. S. Chand Publishing, 2008.
[5] Y. A. ENESI, T. J. OMOKHAFE, J. G. Ambafi, and E. O. AGBACHI, “Permanent Split Capacitor (PSC) alternating current induction motor,” 2015.
[6] L. K. Irving, “Electric machinery and transformer.” Delhi, PHI Learning Private Limited India, 2008.
[7] C. Mademlis, I. Kioskeridis, and T. Theodoulidis, “Optimization of single-phase induction Motors-part I: maximum energy efficiency control,” IEEE Trans. Energy Convers., vol. 20, no. 1, pp. 187–195, 2005.
[8] S. K. Krikor, Y. M. Dhari, and K. Y. Maha, “Starting performance analysis of single-phase capacitor motor using finite element method,” Eng. Tech., vol. 26, no. 8, 2008.
[9] V. Sarac and N. TRAJCHEVSKI, “Impact of capacitor on operating characteristics of single-phase motor,” in 2019 16th Conference on Electrical Machines, Drives and Power Systems (ELMA), 2019, pp. 1–5.
[10] R. K. Agarwal, Principles of electrical machine design. SK Kataria and Sons, 2009.
[11] O. J. Tola, E. A. Umoh, E. A. Yahaya, C. Idoko, and A. Imoru, “Electromagnetic Field analysis of a Single-phase Induction Motor based on Finite Element Method.”
[12] “Magnet Getting Started Guide,” no. May. pp. 1–30, 2014.
[13] S. A. Nasar, The induction machines design handbook. CRC press, 2010. | ||
Statistics Article View: 189 PDF Download: 566 |