The effect of zirconium oxide nanoparticle on the surface roughness of maxillofacial silicone | ||
Al-Rafidain Dental Journal | ||
Article 2, Volume 22, Issue 1, March 2022, Pages 11-18 PDF (544.87 K) | ||
Document Type: Research Paper | ||
DOI: 10.33899/rdenj.2021.129297.1078 | ||
Authors | ||
Israa Hussein* 1; Radhwan H. Hasan2 | ||
1department of prosthodontic, college of dentistry, University of Mosul, Mosul, Iraq. | ||
2Department of Prosthodontics, College of Dentistry, University of Mosul | ||
Abstract | ||
Aims: The study intended to inspect the consequence of the addition of zirconium oxide (ZrO2) nanoparticle at two concentrations (1% and 1.5% by weight) on the surface roughness of the maxillofacial silicone material (room temperature vulcanized). Materials and methods: Thirty samples were prepared according to the manufacture instructions and divided into three groups (n=10). A digital surface roughness profilometer tested the surface roughness samples for the control group (A) free from nanoparticle, group (B) 1% ZrO2, group (C) 1.5 % ZrO2. Results: The mean values of the surface roughness measured groups a highly significant difference among groups. Group A (.2137 µm) exhibited a highly significant difference compared to group B (.2698 µm) and group C (.2801 µm). Besides, a highly significant difference between group B and group C. Conclusions: Incorporation of 1% and 1.5% by weight of ZrO2 nanoparticle into maxillofacial silicone material increases surface roughness. | ||
Keywords | ||
Maxillofacial material; Surface Roughness; Nanoparticle | ||
Statistics Article View: 324 PDF Download: 353 |