Preparation of Metakaolin Based Geopolymer Foam Using a Combination of Na and K Types of Alkali Activators

Radhi, Mohammed S.; Al-Ghaban, Ahmed M.; Disher, Imad A.

doi:10.30684/etj.v40i1.2188

	Preparation of Metakaolin Based Geopolymer Foam Using a Combination of Na and K Types of Alkali Activators
Engineering and Technology Journal
Article 33, Volume 40, Issue 1, January 2022, Pages 282-289 PDF (968.02 K)
DOI: 10.30684/etj.v40i1.2188
Authors
mohammed S. Radhi^* ¹; Ahmed M. Al-Ghaban¹; Imad A. Disher²
¹Materials Engineering Dept., University of Technology-Iraq, Alsina’a street,10066 Baghdad, Iraq.
²Ceramics Engineering and Building Materials Dept., Faculty of Materials Engineering, University of Babylon, Babylon.
Abstract
In this research, the ordinary Portland cement (OPC) was mixed with metakaolin, activator, hydrogen peroxide, and olive oil to synthesize hybrid geopolymer foam. The obtained results indicated internal heat release throughout OPC hydration in the combination. OPC was employed as a calcium source in geopolymers (Geopolymer-Portland cement (HGPF)) to explore the curing process of geopolymers at ambient temperature. The functionality of geopolymer components and (HGPF) mixture, the elemental composition, and proportion analyses have been compared. A principal aim of this research focuses on developing geopolymer foam and conducting many tests such as physical tests related to the surface area and pores size and compression of the foam to investigate the capacity of applying this foam in different applications that require good strength. Furthermore, microstructure tests using SEM and XRD techniques have been conducted to examine surface structure components. Overall, the findings presented in this research show that the materials selected to develop the geopolymer foam were compatible with each other giving high porosity with acceptable compression via optimizing the processing parameters by RSM.
Highlights
A direct foaming methodology is presented for formulating hybrid geopolymer foam. The effect of K-ions on compressive strength and porosity of a produced foam was identified. Identified parameters for assessing the quality of the geopolymer foamed parts.
Keywords
Alkali-Activated Geopolymer; Metakaolin Curing Condition Thermal Insulation

References
[1] M. B. M. Salahuddin, M. Norkhairunnisa, and F. Mustapha, A review on thermophysical evaluation of alkali-activated geopolymers, Ceram Int, 41 (2015) 4273–4281. [2] J. Davidovits, Geopolymer chemistry and applications, J Davidovits–Saint-Quentin, 4^th edition, Fr, (2015). [3] B. C. McLellan, R. P. Williams, J. Lay, A. Van Riessen, and G. D. Corder, Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement, J. Clean Prod., 19 (2011) 1080–1090. [4] T. Bakharev, Resistance of geopolymer materials to acid attack, Cem. Concr. Res., 35 (2005) 658–670. [5] B. Nematollahi and J. Sanjayan, Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer, Mater. Des., 57 (2014 ) 667–672. [6] T.W. Cheng and J. P. Chiu, Fire-resistant geopolymer produced by granulated blast furnace slag, Miner Eng., 16 (2003) 205–210. [7] R. M. Novais, G. Ascensão, M. P. Seabra, and J. A. Labrincha, Waste glass from end-of-life fluorescent lamps as raw material in geopolymers, Waste Manag., 52 (2016) 245–255. [8] J. L. Provis, Alkali-activated binders, Cem. Concr. Res., 114 (2018) 40–48. [9] J. S. J. Van Deventer, J. L. Provis, and P. Duxson, Technical and commercial progress in the adoption of geopolymer cement, Miner Eng., 29 (2012) 89–104. [10] E. Prud’homme, P. Michaud, E. Joussein, C. Peyratout, A. Smith, S. A. Clacens, J.M. Clacens and S. Rossignol, Silica fume as porogent agent in geo-materials at low temperature, J. Eur. Ceram. Soc., 30 (2010) 1641–1648. [11] Y. Luna-Galiano, C. Leiva, C. Arenas, and C. Fernández-Pereira, Fly ash based geopolymeric foams using silica fume as pore generation agent. Physical, mechanical and acoustic properties, J. Non Cryst. Solids, 500 (2018) 196–204. [12] W. D. A. Rickard and A. Van Riessen, Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire, Cem. Concr. Compos., 48 (2014) 75–82. [13] R. M. Novais, L. H. Buruberri, M. P. Seabra, and J. A. Labrincha, Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters, J. Hazard. Mater., 318 (2016) 631–640. [14] R. M. Novais, T. Gameiro, J. Carvalheiras, M.P. Seabra, L.A. Tarelho, J.A. Labrincha, and I. Capela,High pH buffer capacity biomass fly ash-based geopolymer spheres to boost methane yield in anaerobic digestion, J Clean Prod, 178 (2018) 258–267. [15] M. I. M. Alzeer, K. J. D. MacKenzie, and R. A. Keyzers, Porous aluminosilicate inorganic polymers (geopolymers): a new class of environmentally benign heterogeneous solid acid catalysts, Appl. Catal. A Gen., 524 (2016) 173–181. [16] G. Masi, W. D. A. Rickard, L. Vickers, M. C. Bignozzi, and A. Van Riessen, A comparison between different foaming methods for the synthesis of light weight geopolymers, Ceram. Int., 40 (2014) 13891–13902. [17] K. Okada, A. Ooyama, T. Isobe, Y. Kameshima, A. Nakajima, and K. J. D. MacKenzie, Water retention properties of porous geopolymers for use in cooling applications, J. Eur. Ceram. Soc., 29 (2009) 1917–1923. [18] J. Davidovits, Geopolymer chemistry & applications, Institut Géopolymère (Geopolymer Institute), 5^th ed., Saint-Quentin, France, (2011). [19] P. Duxson, J. L. Provis, G. C. Lukey, S. W. Mallicoat, W. M. Kriven, and J. S. J. Van Deventer, Understanding the relationship between geopolymer composition, microstructure and mechanical properties, Colloids Surfaces A Physicochem. Eng. Asp., 269 (2005) 47–58. [20] A. Kothari, Effects of fly ash on the properties of alkali activated slag concrete, Master Thesis, Civil, Environmental, and Natural Resources Eng. Dept., Luleå Univ. of Technology, Luleå, Sweden, (2017). [21] J. L. Bell and W. M. Kriven, Preparation of ceramic foams from metakaolin-based geopolymer gels, Ceram. Eng. Sci. Proc., 29 (2009) 97–112. [22] Y. Ali, M. Razi, F. De Felice, M. Sabir, and A. Petrillo, A VIKOR based approach for assessing the social, environmental and economic effects of smog on human health, Sci. Total. Environ., 650 (2019) 2897–2905. [23] L. Coppola, T. Bellezze, A. Belli, M.C. Bignozzi, F. Bolzoni, A. Brenna, M. Cabrini, S. Candamano, M. Cappai, D. Caputo and M. Carsana, Binders alternative to Portland cement and waste management for sustainable construction—Part 1, J. Appl. Biomater. Funct. Mater., 16 (2018) 186–202. [24] D. C. Arango, S. B. Jaramillo, P. A. Monsalve, A. V. Hernández, and L. F. B. Botero, Relationships between lean and sustainable construction: Positive impacts of lean practices over sustainability during construction phase, J. Clean Prod., 234 (2019) 1322–1337. [25] S. Škapa and M. Vochozka, Techno-economic considerations: turning fermentation residues into lightweight concrete, Energy Sources, Part A Recover Util Environ Eff, 41 (2019) 1041–1048. [26] G. Roviello, L. Ricciotti, C. Ferone, F. Colangelo, and O. Tarallo, Fire resistant melamine based organic-geopolymer hybrid composites, Cem. Concr. Compos., 59 (2015) 89–99. [27] C. Ferone, G. Roviello, F. Colangelo, R. Cioffi, and O. Tarallo, Novel hybrid organic-geopolymer materials, Appl. Clay Sci., 73 (2013) 42–50. [28] G. Roviello, L. Ricciotti, C. Ferone, F. Colangelo, R. Cioffi, and O. Tarallo, Synthesis and characterization of novel epoxy geopolymer hybrid composites, Materials (Basel), 6 (2013) 3943–3962. [29] F. Colangelo, G. Roviello, L. Ricciotti, C. Ferone, and R. Cioffi, Preparation and characterization of new geopolymer-epoxy resin hybrid mortars, Materials (Basel), 6 (2013) 2989–3006. [30] M. Flores, D. Mollenhauer, V. Runatunga, T. Beberniss, D. Rapking, and M. Pankow, High-speed 3D digital image correlation of low-velocity impacts on composite plates, Compos. Part B Eng., 131 (2017) 153–164. [31] D. Khale and R. Chaudhary, Mechanism of geopolymerization and factors influencing its development: a review, J. Mater. Sci., 42 (2007) 729–746. [32] J. L. Provis, Modelling the formation of geopolymers. Ph.D. Thesis, Chemical & Biomolecular Eng., Univ. of Melbourne, Australia, (2006). [33] A. Al-dujaili, I. A. Disher Al-hydary, and Z. Zayer Hassan, Optimizing the Properties of Metakaolin-based (Na, K)-Geopolymer Using Taguchi Design Method, Int. J. Eng., 33 (2020) 631–638. [34] P. Nath and P. K. Sarker, Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature, Cem. Concr. Compos., 55 (2015) 205–214.
Statistics Article View: 286 PDF Download: 410