Simulation of Storm Sewer Network Using a Storm Water Man-agement Model (SWMM), Ramadi City as a Case Study | ||
Anbar Journal of Engineering Sciences | ||
Article 9, Volume 12, Issue 1, May 2021, Pages 83-89 PDF (3 M) | ||
Document Type: Research Paper | ||
DOI: 10.37649/aengs.2021.171201 | ||
Authors | ||
Ethar I. Mohammad1; Ayad S. Mustafa2; Ammar Adham2 | ||
1a Dams and Water Resources Engineering Department, College of Engineering, Al-Anbar, Iraq | ||
2civil engineering Department, College of Engineering, Al-Anbar, Iraq | ||
Abstract | ||
Ramadi city is suffering from severe flood problems during rainfall season as in many cities in developed countries. Storm Water Management Model (SWMM) was used to simulate storm sew-er network in the study area and depending on design rainfall intensity of 9.6 mm/hour. The rainfall intensity was proposed to increased by two to three times of the design intensity because of the absence of metrological stations in the study area to record rainfall intensity data of the rain storm. The intensity increasing by three times led to maximizing the flood risk by 43%. The proposed management to overcoming this problem is linking the collateral lines in Al-Andalus and Alhoz suburbs by additional pipes, this method reduces the percentage of flooding to 31%. Moreover, Economic Indicators (EI) were suggested to evaluate the cost of the network develop-ment. The area index ( ) which represents the total cost of the added pipes to the total area of the suburb, and the longitudinal index ( ), which represents the total cost of the added pipes to the length of the main pipe, the magnitudes of these indexes are 178 US dollar/hectare, and 57 US dollar/m respectively. | ||
Keywords | ||
storm sewer network SWMM Ramadi rainwater intensity Economic Indicators; EI | ||
Statistics Article View: 205 PDF Download: 206 |