Analyzing sensitivity and resolution of some electrical resistivity configurations for detecting subsurface cavities using inverted synthetic models by 2D electrical resistivity tomography technique | ||
| Iraqi National Journal of Earth Science (INJES) | ||
| Article 7, Volume 20, Issue 2, December 2020, Pages 64-85 PDF (1 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/earth.2020.170370 | ||
| Authors | ||
| Zainab Shanshal* ; Ahmed Al-Heety | ||
| Abstract | ||
| It is important to determine the location, depth and shape (dimensions) of cavities under subsurface in site investigation phase before construction. This study aims to make a study for properties, analysis and comparison of the results of different electrodes configurations that used in 2-D electrical resistivity Tomography surveys to detection subsurface cavities to determining the appropriate and suitable configurations type that must be conduct in the field to obtain best and accurate results. Two-dimensional synthetic models were created for Geoelectrical resistivity of five different geological features, which reflects the common cases of cavities in nature. These models are (narrow, broad, shallow and deep) cavities adding to one model for multiple cavities. RES2DMOD program was used to create these models, while RES2DINV program used in Inversion method to obtain the true 2-D inverted resistivity sections for six configuration types of electrode array for 2D electrical resistivity technique, after adding a Gaussian noise ratio of (5%). Generally, we are noticed the possibilities of most tested configuration types for determine electrical anomalies, because the high contrast between the cavities and the surrounding rocks resistivities values. In addition, RMS ratio overall does not exceed 5%, hence, this ratio is an acceptable and indicates to the quality of the inverse process. The Wenner array have high sensitivity to vertical resistivity variations, and Dipole-dipole array have high sensitivity to lateral resistivity variations. While the Schlumberger-wenner have high sensitivity in both lateral and vertical resistivity variations Also, it was noted that the efficiency of all types decreasing with increasing depth of cavities detecting, due to the low percentage of contrast between the cavities and the surrounding rocks. The Wenner beta (WB) configuration is the best choice in terms of inversing true resistivity values, Secondly the Pole-Dipole (PD). While in term of determining the location and shape (approximately dimensions) of cavities, Dipole-Dipole (DD), Wenner-Schlumberger (WS), Wenner Alpha (WA), Dipole-Pole (DP) respectively. However, in case of noisy areas, Wenner Alpha (WA) configuration gives the best result. | ||
| Keywords | ||
| Subsurface cavities; industrial models; analysis; clarity and accuracy; Electrical resistivity | ||
|
Statistics Article View: 242 PDF Download: 357 |
||