Synthesis and Characterization of CoFe2O4Nanoparticles Prepared by Sol-GelMethod | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 38, 2B, July 2020, Pages 47-53 PDF (1.22 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.30684/etj.v38i2B.252 | ||
| Authors | ||
| Rihab Jabbar* 1; Sabah H. Sabeh2; Awham M. Hameed2 | ||
| 1Applied Science Department, University of Technology, Baghdad, Iraq | ||
| 2Science Department, University of Technology, Baghdad, Iraq | ||
| Abstract | ||
| Cobalt Ferrite (CoFe2O4) nanoparticles (NPs) were prepared by Sol-Gel precipitation method. Two samples were synthesized and sintered with different sintering temperatures; sample A at 400 °C and sample B at 800 °C for two hours. The prepared samples were characterized by XRD, FTIR, SEM, and AFM, Compressive test and Micro-hardness. The result showed as the sintering temperatures increased, the crystallite size increased from 10.07 nm to 15.14 nm. FTIR spectra showed two strong absorption bands in the range of 800 - 400 cm-1, confirmed formation of spinel ferrites NPs. SEM and AFM micrographs showed that the samples have an approximately spherical shape. The mechanical properties of CoFe2O4 NPs were not widely studied. Therefore, in this work, the mechanical properties (Compressive strength and Micro-hardness) of prepared material studied as an important contribution for researchers to focus on mechanical properties of CoFe2O4 NPs. Where the mechanical result showed that both the compressive strength was increased (from 4.42 to 10.57 N/mm2) and Micro-hardness (from 10.33 to 174.4 N/mm2) with increasing sintering temperature. | ||
| Keywords | ||
| Cobalt Ferrite; Sol-Gelmethod; nanoparticles; Sintering Temperature | ||
| References | ||
|
[1] G. E Veena, P.A.Joy, I.A. Al-Omari, K. D. Sakthi, Y. Yasuhiko and M.R. Anantharaman, “On the structural, magnetic and electrical properties of sol-gel derived nanosized cobalt ferrite,” Journal of Alloys compd., V 485, 711–717. 2009.
[2] G. E Veena, P.A. Joy, I.A. Al-Omari, K. D. Sakthi and Y. Yasuhiko, “Inverse magnetocaloric effect in sol-gel derived nanosized cobalt ferrite,” Appl. Phys. A: Materials Science & Processing, V 99, No 2, 497–503, 2010
[3] S. Nilmoung, P. Kidkhunthod, S. Pinitsoontorn, S. Rujirawat, R. Yimnirun, and S. Maensiri, “Fabrication, structural, and magnetic properties of electrospun carbon/cobalt ferrite (C/CoFe2O4) composite nanofiber,” J Mater Sci. Process, V 119,141-150. 2015.
[4] S. Mirzaee, S. F. Shayesteh and S. Mahdavifar, “Anisotropy investigation of cobalt ferrite nanoparticles embedded in polyvinyl alcohol matrix: A Monte Carlo study,” Polymer, V 55, 3713-3719, 2014.
[5] R. Topkaya, U. Kurtan, Y. Junejo and A. Baykal, “Sol-Gel auto-combustion synthesis of CoFe 2O4/1-methyl-2-pyrrolidone nanocomposite with ethylene glycol: its magnetic characterization," Mater. Res. Bulletin, V 48, 3247-3253. 2013.
[6] Z. Yue, Y. Zhi, Y. Di, L. Yong, and L. F. Chun, "Composition and magnetic properties of cobalt ferrite nanoparticles prepared by the co-precipitation method,” J.Magn.Magn.Mater, V 322, 3470–3475, 2010.
[7] S. Amiri and H. Shokrollahi, "The role of cobalt ferrite magnetic nanoparticles in medical science,” J. of Mate. Sci. and Eng. V 33,1-8. 2013.
[8] K. Pawan, S. K. Sharma, M. Knobel, and M. Singh, “Effect of La+3 doping on electric, dielectric and magnetic properties of cobalt ferrite processed by co-precipitation technique," J. Alloy's compound, V 508, 115–118. 2010.
[9] C.J. Brinker, G.W. Scherer ed "Sol-Gel Science,” Academic Press, Boston, 1990.
[10] X. Sheena, T. Smitha, P. Binu , E. Mohammed “Effect of sintering temperature on the structural and magnetic properties of cobalt ferrite nanoparticle,” Nanosystem; Phys., Chem., Math., Vol 4, 430–437, 2013.
[11] S. Raghvendra, K. Ivo, V. Jarmila, H. Jaromir, M. Jiri, K. Lukas, T. Jakub, S. Jiří, E. Vojtěch and, H. Miroslava, “Impact of grain size and structural changes on magnetic, dielectric, electrical, impedance and modulus spectroscopic characteristics of CoFe2O4 nanoparticles synthesized by honey mediated sol-gel combustion method,” Adv. Nat. Sci.: Nanoscience. Nanotechnology. Vol.8, 14, 2017.
[12] A. Lunhong and J. Jing ”Influence of annealing temperature on formation, microstructure and magnetic properties of spinal nanocrystalline cobalt ferrite,” Cur. App. Phy., Vol.10, 284-288, 2010.
[13] R. Bortnic, G. Firuta, M. Amalia, N. Mircea, S. Bogdan, R. Dudric, A. Alexandra ”Synthesis of Cobalt Ferrite nanoparticles via a Sol-Gel combustion method”, Studia Ubb Chem., Vol.4, 213 – 222, 2016.
[14] C. Grish, R. Srivastavab, R. Reddyc, H. Agrawalb “Effect of sintering temperature on magnetization and Mössbauer parameters of cobalt ferrite nanoparticles,” J. of Mag. and Mag. Mater. Vol. 427, 225–229, 2017.
[15] M. Goudarzi1, N. Mi, M. Mousavi, S. Bagheri M. Salavati “Biosynthesis and characterization of silver nanoparticles prepared from two novel natural precursors by facile thermal decomposition methods,” Scientific reports, Vol 6, 32539, 2016.
[16] M. Salavati, M. Dadkhah , F. Davar “Synthesis and characterization of pure cubic zirconium oxide nanocrystals by decomposition of bis-aqua, tris-acetylacetonato zirconium (IV) nitrate as new precursor complex,” Inorganica Chimica Acta, Vol. 362, 3969–3974, 2009.
[17] F. Mohandes and M. Salavati “Sonochemical synthesis of silver vanadium oxide micro/nanorods: Solvent and surfactant effects,” Ultrasonics Sonochemistry, Vol. 20, 354–365, 2013.
[18] M. Esmaeili-Zare, M. Salavati, A. Sobhani “Simple sonochemical synthesis and characterization of HgSe nanoparticles,” Ultrasonics Sonochemistry Vol. 19, 1079–1086, 2012.
[19] T. Gholami, M. Salavati, M. Bazarganipour, E. Noori “Synthesis and characterization of spherical silica nanoparticles by modified Stöber process assisted by organic ligand,” Superlattices and Microstructures Vol. 61, 33–41, 2013.
[20] K. Hemaunt, R. SrivaSsava, P. Negi, H. M. Agrawal, and K. Asokan, “Dielectric behavior of cobalt ferries nanoparticles,” Inter. J of Elec. and Elec. Eng., V 2, 59-66, 2013.
[21] I. H. Gul, A. Z. Abbasi, F. Amin, M. Anisurrehman, and A. Maqsood, “Structural, magnetic and electrical properties of Co1-xZnxFe2O4 synthesized by co-precipitation method,” J. Magn. Magn. Matter. V 311, 494-499. 2007.
[22] T. P. Raming, A. Winnubust, C. Van Kats and P. Philipse, “The synthesis and magnetic properties of nanosized hematite particles,” J. Colloid Interface Sci. V 249, 346, 2002.
[23] P. Pulišová, J. Kovác, A. Voigt and P. Raschman, "Structure and magnetic properties of Co and Ni nano-ferrites prepared by a two-step direct micro emulsions synthesis,” J of Mag. and Mag. Mater. V 341, 93-99. 2013.
[24] W. Ryan and C. Radford, “White Wares, production, testing, and quality control,” The Institute of Ceramics Pergamon Press, U.K. 191-232. 1987.
[25] l. Frank and F. Y.Wang, “Treatise on materials science and technology,” ceramics fabrication processes by Academics press, New York, V 9, 252, 1976.
[26] M. Ashby and F. Jones, “Engineering materials: An introduction to their properties and Application,” Oxford, V 34, 78-81. 1980.
[27] Clauser, “Industrial and engineering materials,” McGraw- Hill, Tokyo, 56-59, 1975.
[28] T. Ilmah and K. S. Mazdiyasni, “Mechanical properties of mullite,” J.Am.Ceram.Soc. 1983, 66, 699-703, 1983.
| ||
|
Statistics Article View: 343 PDF Download: 377 |
||