Effect of laser Peening on the Microhardness and Roughness of Al-7277 alloy | ||
| Engineering and Technology Journal | ||
| Article 4, Volume 37, 10A, October 2019, Pages 404-407 PDF (174.35 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.30684/etj.37.10A.4 | ||
| Authors | ||
| Mays O. Hashim; Abdul Hadi K. Judran; Razi J. Al Azawi | ||
| University of Technology - Iraq | ||
| Abstract | ||
| The purpose of the study conducted was an analysis of the influence of pulse density per area unit of LSP on (7277AL Alloy) regarding the surface characterization, roughness achieved and microhardness. The samples, which were used in this investigation, are 7277Al Alloy. Specify the laser parameter used in this study effect on sample surface properties were studied. Such as laser energy, and laser pulses number the results reveal that the microhardness enhancement by 80%, while the surface roughness increased by 69% when laser energy of 360mj and the number of laser pulses of 100 pulse were applied. X-ray fluorescence analyses and optical microscope were carried out for all samples. | ||
| Keywords | ||
| The Laser Shock Wave; Micro Hardness; Surface Roughness; Nd: YAG Laser | ||
| References | ||
|
[1] C. Vargel, “Corrosion of Aluminum, “Elsevier Science. San Diego, USA. 2004. [2] C.N. Panagopoulos, E.P. Georgiou, A.G. Gavras, “Corrosion and wear of 6082 aluminum alloy,” Tribol .int.42, 6, 886-889, 2009. [3] J.B. Bajat et al., “Corrosion protection of aluminum pretreated by vinyltriethoxysilan in sodium in sodium chloride solution' corros .Sci .52, 3, 1060-1069, 2010. [4] C. Rubio-Gonzleza, C. Felix-Martineza, G. GomezRosasb, J.L. Ocanac, M. Moralesc and J.A. Porroc “Effect of laser shock processing on fatigue crack growth of duplex stainless steel,” Materials Science and Engineering A 528, 914- 919, 2011. [5] M.A. Montealegre and C. Materials, “Surface Treatments by Laser Technolgy,” 1, 19–30, 2010. [6] P. Peyre, L. Berthe, X. Scherpereel and R. Fabbro “Laser-shock processing of aluminium-coated 55C1 steel in water-confinement regime, characterization and application to high-cycle fatigue behavior,” Journal of Materials Science, 33, 1421 – 1429, 1998. [7] D. Schuocker, Handbook of the Eurolaser Academy, Ed. Chapman-Hall, 1998. [8] W.M. Steen, “Laser Material processing,” Springer, 2003. [9] S. Sathyajith, S. Kalainathan, and S. Swaroop, “Laser peening without coating on aluminum alloy Al-6061-T6 using low energy Nd: YAG laser,” Opt. Laser Technol., 45, 1, 389–394, 2013. [10] S. Matthew and craig .B “Fundamentals of laser – material intracction and application to multiscale surface modification,” CH.2, p91-104, Princeton university-USA 2010. [11] Y. Zhang et al. Chapter 2, “Surface Integrity of LY2 Al Alloy Subjected to Laser Shock Processing,” Springer Series in Materials Science 179, DOI: 10.1007/978-3-642- 35674-2-2, Berlin Heidelberg, 2013. [12] A. Kadhim, E.T. Salim, S. M. Fayadh, A.A. AlAmiery, “Effect of Multipath Laser Shock Processing on Microhardness, Surface Roughness, and Wear Resistance of 2024-T3 Al Alloy,” The Scientific World Journal Volume, Article ID 490951,6 pages., 2014. [13] U. Trdan, J.L. Ocaña, J. Grum, “Surface Modification of Aluminium Alloys with Laser Shock Processing,” Strojniški vestnik - Journal of Mechanical Engineering 575, 385-393., 2011. [14] H.T. Hussein, A. Kadhim, A.A. Al-Amiery, “Enhancement of the Wear Resistance and Microhardness of Aluminum Alloy by Nd:YAG laser treatment, Scientific World Journal, Article ID 842062, 5 pages., 2014. [15] Y. Hu and Z. Yao “Numerical simulation and experimentation of overlapping laser shock processing with symmetry cell,” International Journal of Machine Tools & Manufacture 48, 152–162., 2010. [16] G. Gomez-Rosasa, C. Rubio-Gonzalezb, J. L. Ocanac, C. Molpeceresc, J.A. Porroc, M. Moralesc and F.J. Casillas “Laser Shock Processing of 6061-T6 Al alloy with 1064nm and 532nm wavelengths,” Applied Surface Science 256, 5828–5831, 2010. | ||
|
Statistics Article View: 237 PDF Download: 193 |
||