Improving the Stability and Critical Speed of Rotor Bearing System By Using External Damping Source | ||
| Engineering and Technology Journal | ||
| Article 4, Volume 38, 3A, March 2020, Pages 319-324 PDF (573.2 K) | ||
| DOI: 10.30684/etj.v38i3A.344 | ||
| Authors | ||
| Tariq M. Hammza* 1; Nassear R. Hmoad2; Ehab N. Abas3 | ||
| 1University of technology, Electromechanical Engineering Department, Baghdad, Iraq. 50298@uotechnology.edu.iq | ||
| 2University of Baghdad, College of Engineering, Aeronautical Engineering Dept. Baghdad, Iraq. nassear_machine@yahoo.com | ||
| 3Ministry of Higher Education and Scientific Research ,Studies and Planning and Follow Up Directorate Baghdad, Iraq. ehab19722002@gmail.com | ||
| Abstract | ||
| Improving the essential factors of rotor bearing system are the aim of this study. In addition to the presence of two ball bearings to support the rotor, two additional fluid film journal bearings have been used as an external damping sources. The ANSYS Mechanical APDL 18.0 was used to model rotor bearing system with existence of two additional fluid film journal bearings. Matlab software has been used to achieve the analytical solution. The results clearly showed that the maximum response displacement strongly decreasing and the critical speed has been enhance by using an external damping source as well as the stability of rotor bearing system has been improved due to increasing damping of rotor system where the response displacement decreasing by 99% and critical speed increasing by 0.6% when using an external damping sources. The position of damping source has an important effect on the maximum response displacement and the more decreasing value of response displacement has been achieved when the damping source become as close as possible to the disk position. | ||
| Keywords | ||
| Rotor; Critical speed; Ball Bearing; fluid Film Journal Bearing | ||
| References | ||
|
[1].Y. Kang, Y. P. Chang, J.W. Tsai, L.H. Mu and Y. F. Chang,” An investigation in stiffnesseffects on dynamics of rotor-bearing- foundation systems”, doi:10.1006/jsvi.1999.2719, Journal of Soundand vibration, 231(2), 343-374, 2000.
[2] J. A. Vazquez, L. E. Barrett and R. D. Flack, “Including the Effects of Flexible Bearing Supports in Rotating Machinery”, International Journal of Rotating Machinery, Vol. 7, No. 4, pp. 223-236, 2001.
[3] D. P. Fleming , J. T. Sawicki , J.V. Poplawski” Unbalance response prediction for accelerating rotors with load-dependent nonlinear bearing stiffness”, NASA/TM-2005- 213801, 2005
[4] G. S. Navarro, F. L. Medina and A. C. Amado,”Unbalance compensation in a rotor- bearing system by dynamic stiffness control and acceleration scheduling”, Proceedings of ISMA 2010, International Conference on Noise and Vibration Engineering including USD2010; Leuven, Belgium, 20 - 22 September , 2010.
[5] X. Zhang, K. Gao, Z. Shen, and Y. Xie, “The vibration characters analysis of tube compressor” Proceedings of the 5th International Conference on Civil Engineering And Transportation, Guangzhou, China, Published by Atlantis Press, 2015.
[6] J. Yao, J. Gao, Y. Zhang, and W.Wang,”The dynamic analysis of two-rotor three-bearing system”, Hindawi Publishing Corporation, International Journal of Rotating Machinery, Vol. 2015, Article ID 342636, 15 pages, doi.org/10.1155/2015/342636, 2015. [7] M. Eftekhari”The effect of damping and stiffness of bearing on the natural frequencies of rotor bearing system”, International Journal of Engineering Vol. 30, No. 3, 448-455 , Iran, doi: 10.5829/idosi.ije.2017.30.03c.15, 2017
[8] C. J. Paul, K. Srividya, M. Nagaswapnasri, K. K. Dondapati and L. Camarini, “Effect of oil viscosity over critical frequencies in rotor bearing systems” International Journal of Engineering Research and Technology. ISSN 0974-3154 Vol. 11, No. 2, pp. 307-317, 2018.
[9] ANSYS Help Topics Mechanical APDL Documentation Version 18.0. 2018. | ||
|
Statistics Article View: 312 PDF Download: 252 |
||