Study the Effect of Epoxy Additives on Some Physical Properties of Asphalt Cement | ||
| Journal of University of Anbar for Pure Science | ||
| Article 10, Volume 3, Issue 1, April 2009, Pages 31-37 PDF (437.84 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2009.15487 | ||
| Authors | ||
| SalimM.A. Al-ani* 1; Thamer J. Ahmed2; Khalil T. Al-Rawi1; Taher M.A. Al-ani2 | ||
| 1University of Anbar- Science College | ||
| 2University of Anbar- Engineering College. | ||
| Abstract | ||
| Abstract:In the series of study on the asphalt cement to improve properties of asphalt cement several polymers materials are used for this purpose. In this study Epoxy used at different percentage by weight (1, 2, 4 and 6) %. Epoxy was added in three cases, pure Epoxy and the other two cases were mixing of Catalyst-Epoxy by weight in the two ratio (1:3) and (1:4).The effect of additives on the asphalt cement properties are evaluated by penetration test (ASTM D-5)(10), softening point test (ASTM D-2398)(10), and Kinematics viscosity test (ASTM D-2170)(10). Temperature susceptibility of asphalt cement was evaluated by using Penetration viscosity number ( PVN ). The study shows that Epoxy, 1:3 Epoxy and 1:4 Epoxy additives have more effect on the physical properties of asphalt cement and make asphalt softer than original asphalt cement, the additives reduced the temperature susceptibility, but Epoxy have more reduction in the susceptibility of asphalt cement compared with 1:3 Epoxy and 1:4. | ||
| Keywords | ||
| Epoxy; physical Properties; Asphalt Cement | ||
| References | ||
|
1.R.L.Dunning, G.O.Schulz and W.F.Gawron “Control of Stripping with Polymer Treatment of Aggregate” Proceeding of Association of Asphalt Paving Technologists, Vol.62 (1993) p.p 223.
2.Shoji Ogino, Tatsuhike Ohmae and Takashi Kouzuki, “Laboratory Investigation Into the Impact of Phenolic Resins in the Properties of Asphalt Mixtures”, Proceeding of the Second International Conference on Road and Airfield Pavement Technology, September 1995.
3.Bernard Brule and Michel Maze, “Application of SHRP Developed Test to the Characteristics of Polymer Modified Bitumen” Proceeding of the Association of Asphalt Paving Technologists, Vol.64 (1995) p.p 367.
4.H. J. Ertman Larsen, C.J. Wohlk and B.Hall-Andersen, “Modified Bitumen”, ” Proceeding of the Australian Road Research Board, Part 8, Volume 14, 1988, pp. 222-229.
5.David A. Anderson, Dean Maurer, Dr. Donald W.Christensen , Mihai O. Marasteanu, and Yusuf Mehta “Field Performance of Modified Asphalt Binders Evaluated With Superpave Test Methods: I-80 Test Project” Transportation Research Board 1999.
6.Akhtarhusein A. Tayebali, Joseph I. Goodrich, Jorge B. Sousa, and Carl I. Monismith “Influence of Rheological Properties of Modified Asphalt Binders on the Load Deformation Charicterastics of the Binder-Aggregate Mixture”, Wardlaw/Shuler editors, ASTM, STP 1108, (Polymer Modified Asphalt Binder), 1992, pp.77-96.
7.Nolan K. Lee, Geoffry R. Morrison and Simon A.M. Hesp, “Low Temperature Fracture of Polyethylene-Modified Asphalt Binders and Asphalt Concrete Mixes”, ” Proceeding of the Association of Asphalt Paving Technologists, Vol.64 (1995) p.p 534.
8.Naoum, Asal F.“Some Investigation Into the Properties of Polymer Modifid Asphalt Cement” , M.Sc. Thesis Baghdad Unevirsity- Engineering College (1999).
9.King ,Gayle N., Helen W.King, Otto Harders, Wolfgang Arand and Pierre-Pascal Planche, “Influnce of Asphalt Grade and Polymer Concentration on the Low Temperature Performance of Polymer Modified Asphalt” Proceeding of the Association of Asphalt Paving Technologists, Vol.62 (1993) p.p 1.
| ||
|
Statistics Article View: 222 PDF Download: 141 |
||