Study the tensile strength for epoxy composite reinforced with fibers and particles | ||
| Journal of University of Anbar for Pure Science | ||
| Article 31, Volume 3, Issue 2, August 2009, Pages 110-115 PDF (372.87 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.37652/juaps.2009.15265 | ||
| Author | ||
| Mohammed. Gh. Hamed* | ||
| University of Anbar -College of Science | ||
| Abstract | ||
| : This research include the study of tensile strength for the polymer and the composite materials, we using the epoxy resin as matrix for the reinforced materials that consist of artificial fibers (Kevlar, glass and PVC fibers) also aluminum powder for reinforcing.The slates made of composite materials and hybrid composite materials for both volume fractions 20% and 40% from the reinforced materials, Twenty one slates were made from the composite materials, all these slates were cut into samples with measurement (10x 80mm) in order to execute the tensile strength test for both volume fractions 20% and 40%. The results and laboratory examinations for these samples shows increase in the tensile strength for composite materials when the volume fraction increase from 20% to 40% for reinforced material, the samples from type (EK) have tensile strength is higher than all samples for both volume fraction. | ||
| Keywords | ||
| Tensile Strength; epoxy composite; Reinforced; Fibers; Particles | ||
| References | ||
|
[1] G. Piatti. "Advances in composite materials", Applied science publishers LTD, London, 1978.
[2] Internet report, "Martin Marietta composites" http://www.martinmarietta.com, 2003.
[3] R. K. Salman. "Optimization of composite material mechanical characteristics using computer modeling", master of science in physics, department of physics in the college of science in AL-Anbar university, 2002.
[4] V. Bjohn, "Introduction to engineering materials", second edition, Mc millan publishers, 1983.
[5] Internet report, "Polymer properties", http://www.e- composites.com/co.../resin_polymer_properties1.as, 2002.
[6] Internet report, "Sandwich composites", http://www.fatigue failure sandwich composites materials.mht, 2005.
[7] Somjai Kajorncheappunngan, "The effect of environmental aging on the durability of glass/epoxy composites", doctor of philosophy in engineering, 1999.
[8] A. Blaga, "CBD-159. Thermosetting plastics", Canadian building digest, http://www.Thermosetting plastics.htm, 2003.
[9] Krit Laosiriphong, "Development and evaluation of glass fiber reinforced composite / ", Master of science in civiland environmental engineering Morgantown, West Virginia, 2000.
[10] Internet report, "Fiber reinforced polymer (FRP)composites", http://www.projects.Bre.Co.UK/bpgcomposites/findings.htm,2002.
[11] Kallol Sett and C. Vipulanandan, "Compressive and tensile properties of fiber reinforced polymer concrete", University of Houston, 1998.
[12] A. Brent Strong, "Plastic materials and processing" second edition, Brigham young university, 2000.
[13] M.F.Ashby and D.R.H.Jones, "engineering materials" An Introduction to their properties and applications.
[14] William D. Callister, Jr. "Materials Science and engineering an introduction", Department of metallurgical engineering the university of Utah, 2000.
[15] H. Thomas Hahn and Jerry G. Williams, "Compression failure mechanisms in unidirectional composites". (seventh conference) American society for testing and materials, Philadelphia, 1986, PP. 115-139. | ||
|
Statistics Article View: 272 PDF Download: 96 |
||