Preparation of composites from Nano clays with Epoxy resin and development some of their Mechanical properties | ||
Journal of University of Anbar for Pure Science | ||
Article 24, Volume 11, Issue 3, December 2017, Pages 96-101 PDF (0 K) | ||
Document Type: Research Paper | ||
DOI: 10.37652/juaps.2017.145554 | ||
Authors | ||
Khalid M. Khaleefah1; Balkees M.Dhiaa2; Tariq A. Al-Ani1 | ||
1College of Science - University Of Anbar | ||
2Department of Application Sciences – Technology University | ||
Abstract | ||
The present research includes improvement of Iraq clay to get nano structures composition and use them as reinforcement materials with Epoxy resin with weight fractions (5% , 3%, 1%),and samples of research where prepared by manual molding method. Mechanical tests where carried out( Tensile, Impact ,Hardness, Compression and Bending ). The results showed significant improvements in the properties of the prepared Nano composites. | ||
Keywords | ||
preparation; Nano clays; Epoxy resin; Mechanical properties | ||
References | ||
[1]. Mazumder, S.K. (ed.). Composites Manufacturing, Materials, Product and Process Engineering, CRC Taylor & Francis, ISBN 0-8493-0585-3. (2002).
[2]. Timmerman, J., Hayes, B. and Seferis, J. Nanoclay Reinforcement Effects on the Cryogenic Micro Cracking of Carbon Fiber/Epoxy Composites, Composites Science and Technology, 62: 1249–1258. (2002).
[3]. Chenggang, C. and David, C. Processing and Morphological Development of Montmorillonite Epoxy Nanocomposites, Nanotechnology, 14: 643–648. (2003).
[4]Abed-Al Hakeem R. H., ''The Effect of Iraqi Raw Ceramic (Kaolin and Boxide) on the Epoxy Resin'', M. Sc. Thesis, University of Technology, (2003).
[5] Wright W.W. ,"Composites", Vol. 12, No.3. PP.( 201-205), (1981).
[6] Leiviskä, Tina; Gehör, Seppo; Eijärvi, Erkki; Sarpola, Arja; Tanskanen, Juha. "Characteristics and potential applications of coarse clay fractions from Poulenc, Finland". Central European Journal of Engineering 2 (2): 239–247. Bibcode:2012CEJE....2..239L. doi:10.2478/s13531-011-0067-9. (2012)
[7] Abed, Muhannad Mahdi”Comparsion study of some mechanical and dielectrical properties of TiO2 particles /Epoxy composites"", Doctor Thesis, University of Baghdad,(2012).
[8]. Gojny, F.H., Wichmann, M.H.G., Ko¨ pke, U., Fiedler, B. and Schulte, K. Carbon Nanotube-reinforced Epoxy-composites: Enhanced Stiffness and Fracture Toughness at Low Nanotube Content, Composites Science and Technology, 64(15): 2363–2371. (2004).
[9]. Sheng, N., Boyce, M.C., Parks, D.M., Rutledge, G.C., Abe’s, J.I. and Cohen, R.E. Multiscale Micromechanical Modeling of Polymer/Clay Nanocomposites and the Effective Clay Particle, Polymer, 45: 487. (2004).
[10] H.H. Murray. Traditional and new applications for kaolin, smectite and palygorskite: A general overview. Applied Clay Sci., 17: 207-221. DOI: 10.1016/S0169-1317(00)00016-8. (2000) .).
[11] F. Berjaya and G. Legally. ‘General introduction: Clays, clay minerals, and clay science’; in: “Handbook of clay science” F. Berjaya, B. K. G. Theng and G. Legally (Eds.).Developments in Clay Science, Vol. 1. Chapter 1. Elsevier Science, Amsterdam.doi: 10.1016/S1572-4352(05)01001-9. (2006).
[12]- LETURA M., BENALI M., LAGARDE S., RONGA I., SALEH K. Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods, Powder Technology, Vol. pp.406-423 253, (2014).
[13]- Raman, P. and Mikhail, K .. "Environmental Degradation and Durability of Epoxy- Clay Nanocomposites." Journal of Nanomaterials,20 ,pp :256-261(2010).
| ||
Statistics Article View: 186 PDF Download: 82 |