Corrosion of Gold Thin Films Deposited by Sputtering Deposition Method | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 33, 6B, July 2015, Pages 1145-1153 PDF (452.52 K) | ||
| DOI: 10.30684/etj.2015.116633 | ||
| Authors | ||
| Haitham M. Wadul; Muna Khethier Abbass; Sami Abualnoun Ajeel | ||
| Abstract | ||
| Gold thin films have been prepared and deposited by sputtering deposition system at 17 nm and 34nm thicknesson Ni-Cr-Mo alloy substrate.SEM, AFM, XRD, and Spectroscopic Reflectometer were used to characterize the thin films deposited. Electrochemical corrosion tests also have been carried out by measuring open circuit potential (Eo.c.p), Tafel extrapolation and cyclic polarization methods in artificial saliva solution at 37 0C with elements analysis of the corrosion solution by using atomic absorption spectroscopy (AAS). The results obtained indicate the ability to deposit gold thin films (17nm and 34 nm ) by sputtering deposition methodonNi-Cr-Mo alloy with uniformity and without defects, decreasethe roughness from 2.54 nm to 1.8 nm for gold nanocoated with 34nm and 17 nm respectively, FCC crystalline structure (111) with diffraction peaksresults from XRD, and improvement of the localized corrosion resistance by decreasing the hysteresis loop of nanocoated with 34 nm of gold compared with the uncoated alloy | ||
| Keywords | ||
| corrosion; gold thin films; sputtering depositionmethod | ||
|
Statistics Article View: 309 PDF Download: 197 |
||