Computer Aided Flank Wear Measurement in End Milling Cutting Tool | ||
| Engineering and Technology Journal | ||
| Article 13, Volume 34, 5A, May 2016, Pages 959-972 PDF (1.3 M) | ||
| DOI: 10.30684/etj.34.5A.13 | ||
| Authors | ||
| Ali Abbar Khleif; Mostafa Adel Abdullah | ||
| Abstract | ||
| Flank wear width is generally recognized as the key indicator for tool life.In the experiments of this study, nine tools made of HSS and stainless steel 316L as work piecewiththreespindlespeeds(550,930 and 1100)rpm and three redial depth of cut (1.5,2 and 2.25)mm were used. The cutting tool wear was measured using optical microscope and vision system based on a proposed algorithm.Maximum and minimum percentage errors in the flank wear width were (8.250% and 0.645 %) respectively. The numerical method used was by a multiple linear and polynomial regression model and developed a polynomial model, especially to predict the flank wear using MATLAB software.Maximum and minimum percentage errors werefound (14% and 0.322 %) respectively. | ||
| Keywords | ||
| Tool wear; flank wear; microscope; regression model | ||
|
Statistics Article View: 256 PDF Download: 113 |
||