Raheef Ugal, J., Emad Abd Al-Fattah, M. (2012). Preparation of Epoxy Nanocomposites and Studying Their Mechanical, Thermal and Morphology Properties. Alustath, 8(3), 94-99.
Jalil Raheef Ugal; Muna Emad Abd Al-Fattah. "Preparation of Epoxy Nanocomposites and Studying Their Mechanical, Thermal and Morphology Properties". Alustath, 8, 3, 2012, 94-99.
Raheef Ugal, J., Emad Abd Al-Fattah, M. (2012). 'Preparation of Epoxy Nanocomposites and Studying Their Mechanical, Thermal and Morphology Properties', Alustath, 8(3), pp. 94-99.
Raheef Ugal, J., Emad Abd Al-Fattah, M. Preparation of Epoxy Nanocomposites and Studying Their Mechanical, Thermal and Morphology Properties. Alustath, 2012; 8(3): 94-99.

Preparation of Epoxy Nanocomposites and Studying Their Mechanical, Thermal and Morphology Properties

journal of kerbala university
Article 1, Volume 8, Issue 3, July 2012, Pages 94-99    PDF (0 K)
Authors
Jalil Raheef Ugal; Muna Emad Abd Al-Fattah
Abstract
Epoxy resin was used as a matrix , reinforced by nanosilica as a filler in different percentages ( 1, 3, 5, 7 and 10) % to prepare epoxy nanocomposites and a comparison between manual mixing and ultrasonic mixing by studying mechanical properties (tensile strength) , thermal properties ( Limiting Oxygen Index (LOI)) and morphology ( Scanning Electron Microscope (SEM)) to get the best improvement results .
The best results were for ultrasonic mixing , at additive content 5% for tensile strength, and noticeable increment in all limiting oxygen index measurements.
Statistics
Article View: 182
PDF Download: 174


Journal Management System. Powered by ejournalplus.com