Sorption efficiency of kaolinte in removal Cd from aqueous solutions | ||
| Iraqi Journal of Science | ||
| Article 1, Volume 56, Issue 2, April 2015, Pages 1699-1707 | ||
| Authors | ||
| Salih Muhammad Awadh; Ayad Abdul Hameed Yousif | ||
| Abstract | ||
| Because of the contaminants represented by heavy metals in the aquatic environment have an adverse effects need to be addressed, therefore, a laboratory simulation was conducted on Cd using kaolinite that collected from Ga’ara Formation as considered as a natural sorbent material that can be used to remove heavy metals from aqueous environments. Mineralogical study was conducted on kaolinite using X-Ray diffraction (XRD), Scanning Electron Microscope (ESM) and Energy-Dispersive X-ray Spectroscopy (EDS) for the purpose of investigating the micro-texture. It was found that kaolinite has pure phase of very fine grains with a very little quantity of quartz and has a number of active sites for adsorption. Chemical analyzes were performed using atomic absorption spectroscopy (AAS), Electron Probe Micro analyzer (EPMA) and Energy-Dispersive X-ray Spectroscopy (EDS) techniques confirmed a purity of kaolinite due to high alumina content, except a rare slica content originated from quartz. Kaolinite sorption efficiency was investigated through a series of laboratory experiments. The optimal reaction conditions were determined to be as: pH 5 to 9, but the best is 9, and the eqilibrium reaction time is 40 minutes, and the solid to liquid ration is 1.25 gm to 50 ml. The effect of the initial Cd concentration on the sorption efficiency of kaolininte was also investigated and shows that the sorption proportionally increases with high concentration. All the laboratory experiments indicate that the reaction is an indothermic. | ||
| Keywords | ||
| Sorption; Cadimium; kaolinite; aqueous solutions; ara Formation | ||
|
Statistics Article View: 154 PDF Download: 124 |
||