Keywords = Hardness
| Number of Articles: 78 | ||||
| 1 | A study of the Hardness and Wear Rate of Elastomer Composites Reinforced by Al2O3 and SiO2 Particles | |||
| Engineering and Technology Journal | ||||
| Volume 27, Issue 7, Spring 2009, Page 1422-1434 | ||||
| Jawad K.Oleiwi; Mohammed S. Hamza; Mayyadah Sh. Abed | ||||
| 2 | Characterization and Mechanical Properties of the ZA-12 Hybrid Composites Reinforced with Nano Ceramic Particles | |||
| Engineering and Technology Journal | ||||
| Volume 39, 4A, Spring 2021, Page 642-652 | ||||
| Aveen K. Yawer; Niveen J. Abdulkader; Dr. Ahmed A. Zainalaadbeen | ||||
| 3 | Comparison of Applied Pressure Effect on ImprovingDensity, Hardness, and Microstructure by Both SqueezeCasting Process and Pressure Die Casting Process for 380-Al Alloy | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 12, Issue 2, Spring 2012, Page 334-344 | ||||
| Dr. Najeeb S. Abtan; Dr. Kadhim H. Ghlaim | ||||
| 4 | Comparison of total hardness, calcium and magnesium concentrations in drinking water (RO), and municipal water with WHO and local authorities at Basrah province, Iraq. | |||
| Marsh Bulletin | ||||
| Volume 8, Issue 1, Spring 2013, Page 65-75 | ||||
| Enas A. Mahdi; Ali H. Amteghy; Mohammad S. Moyel; Buthaina M. Younus and Mahasin A. Albadran; Tarik K. Naseer | ||||
| 5 | Determination of Some Chemical Properties of Water Resources in Zintan City | |||
| Tikrit Journal of Pure Science | ||||
| Volume 18, Issue 2, Spring 2013, Page 158-164 | ||||
| Nafea.H.Al-Alwani | ||||
| 6 | DEVELOPMENT OF MICRO-HARDNESS AND WEAR PERFORMANCES OF BIOMEDICAL TITANIUM | |||
| KUFA JOURNAL OF ENGINEERING | ||||
| Volume 9, Issue 2, Summer 2018, Page 131-138 | ||||
| Mohsin T. Mohammed | ||||
| 7 | Effect of Adding Degassing (Ar-N2) on Hardness and Microstructure of Recycling Aluminum Cans | |||
| Anbar Journal of Engineering Sciences | ||||
| Volume 11, Issue 1, Spring 2020, Page 38-42 | ||||
| Mazin N. Ali | ||||
| 8 | Effect of Addition SiC Particles on the Hardness and Dry Sliding Wear of the Copper-Graphite Composite | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 12, Issue 2, Spring 2012, Page 298-304 | ||||
| Dr.Mahdi M.Mutter; Dr.Fadhil A.Chyad; Dr.Ibrahim R.Agoal | ||||
| 9 | Effect of Al2O3 Powder on Some Mechanical and Physical Properties for Unsaturated Polyester Resin Hybrid Composites Materials Reinforced by Carbon and Glass Fibers | |||
| Engineering and Technology Journal | ||||
| Volume 34, Issue 12, Autumn 2016, Page 2371-2379 | ||||
| Reem Alaa Mohammed | ||||
| 10 | Effect of Carburization Parameters on Hardness of Carburized Steel Using MOORA Approach | |||
| Al-Khwarizmi Engineering Journal | ||||
| Volume 14, Issue 3, Autumn 2018, Page 92-99 | ||||
| Abbas Khammas Hussein; Laith Kais Abbas; Asraa Kareem Hameed | ||||
| 11 | Effect of Chemical Solutions on Some Mechanical Properties of (Fe + Cu/UPE) | |||
| Journal of University of Anbar for Pure Science | ||||
| Volume 14, Issue 1, Spring 2020, Page 58-63 | ||||
| Mustafa Ismael; Faik Hammad Anter | ||||
| 12 | Effect of Cryogenic Trteatment on the Tensile Properties of Carbon Dual Phase Steel | |||
| Journal of Engineering | ||||
| Volume 19, Issue 5, Spring 2013, Page 574-582 | ||||
| Hussein Burhan Muhammad; Abbas Abdul Hussein abid | ||||
| 13 | Effect of Different Media on the Corrosion Behavior and Some Mechanical Properties of Al-Zn-Mg Alloy | |||
| Engineering and Technology Journal | ||||
| Volume 28, Issue 3, Winter 2010, Page 525-536 | ||||
| Majid Hameed Abdulmageed | ||||
| 14 | Effect of metal oxides on some mechanical properties of clear acrylic specific for artificial eye | |||
| MUSTANSIRIA DENTAL JOURNAL | ||||
| Volume 13, Issue 1, Autumn 2016, Page 77-84 | ||||
| Dr. Firas Abd Kati Al-Shammari | ||||
| 15 | Effect of Micro Powder on Mechanical and Physical Properties of Glass Fiber Reinforced Epoxy Composite | |||
| Engineering and Technology Journal | ||||
| Volume 34, Issue 7, Summer 2016, Page 1402-1414 | ||||
| Aseel Basim Abdul-Hussein; Fadhel Abbas Hashim; Tamara Raad Kadhim | ||||
| 16 | Effect of Microwave Disinfection on Transverse Strength and Hardness of Acrylic Resin Denture Base Materials | |||
| Al-Rafidain Dental Journal | ||||
| Volume 11, Issue 2, Spring 2011, Page 284-291 | ||||
| Alaa Al-Saraj; Munther N Kazanji; Ghada Y Abdul-Rahman | ||||
| 17 | Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite | |||
| Engineering and Technology Journal | ||||
| Volume 36, 6A, Spring 2018, Page 691-695 | ||||
| Fadhal A. Hashim; Niveen J. Abdulkader; Nibras S. Jasim | ||||
| 18 | Effect of Oil – Corrosion on Tensile and Fatigue S-N Curve Properties of AA6061-T6 | |||
| Engineering and Technology Journal | ||||
| Volume 39, 3A, Winter 2021, Page 407-414 | ||||
| Hussain J.M. Al-Alkawi; Ghgada A. Aziz; Shmoos R. Mazel | ||||
| 19 | Effect of Particle Size of Sawdust on Behaviour of Sawdust/UPE Composites in Water | |||
| Iraqi Journal of Chemical and Petroleum Engineering | ||||
| Volume 16, Issue 4, Autumn 2015, Page 59-65 | ||||
| Nisreen S. Ali; Besma M. Fahad | ||||
| 20 | Effect of Particle Size on Mechanical Properties of the Recycling Compact Disks Reinforced Epoxy | |||
| Engineering and Technology Journal | ||||
| Volume 36, 6A, Spring 2018, Page 641-645 | ||||
| Shayma J. Ahmed | ||||
| 21 | Effect of Particle Size on Some Mechanical Properties of Functionally Graded Polymeric Matrix Composite Produced by Centrifugal Casting | |||
| Al-Rafidain Engineering Journal (AREJ) | ||||
| Volume 22, Issue 4, Summer 2014, Page 205-215 | ||||
| Awad Hallosh Khidhir; Ahmed Akram Abdullah | ||||
| 22 | Effect of Sintering Time for Aluminum / Stainless Steel Composite on Mechanical Properties | |||
| Journal of Engineering and Sustainable Development | ||||
| Volume 17, Issue 1, Winter 2013, Page 154-161 | ||||
| Saheb Mohammed Mahdi | ||||
| 23 | Effect of some disinfectant solutions on the hardness property of selected soft denture liners after certain immersion periods. | |||
| Journal of the Faculty of Medicine | ||||
| Volume 51, Issue 3, Summer 2009, Page 259-264 | ||||
| PhD; BDS; Basima M.A. Hussein; MSc | ||||
| 24 | EFFECT OF SOME FACTORS IN THE FRICTION STIR WELDING ON TENSILE STRENGTH OF AL-Zn-Mg ALLOY | |||
| Al-Qadisiyah Journal for Engineering Sciences | ||||
| Volume 8, Issue 3, Summer 2015, Page 398-409 | ||||
| Waleed T.Rashid | ||||
| 25 | Effect of Some Processing Parameters on Arc Sprayed Coating | |||
| Engineering and Technology Journal | ||||
| Volume 26, Issue 12, Autumn 2008, Page 1550-1562 | ||||
| Ali Hussein Ataiwi | ||||
| 26 | Effect of some Substituents on the Optimization And Electronic Properties of Cyclopentane and Di-Cyclopentane. | |||
| Journal of University of Babylon | ||||
| Volume 25, Issue 3, Spring 2017, Page 1088-1097 | ||||
| Hayder M. Abduljalil; Saja Majeed Mohammed | ||||
| 27 | Effect of Subcritical Treatment (Tempering) on Hardness and Wear of High Chromium White Cast Iron | |||
| Engineering and Technology Journal | ||||
| Volume 41, Issue 4, Spring 2023, Page 1-10 | ||||
| Sahraoui Aissat; Ali Safa | ||||
| 28 | Effect of Thermally Sprayed Ceramic Coating on Properties of Low Alloy Steel | |||
| Engineering and Technology Journal | ||||
| Volume 32, Issue 10, Autumn 2014, Page 2568-2575 | ||||
| Fadhil A. Chyad; Abdalkalaq F. Hamood; Lamees S. Faiq | ||||
| 29 | EFFECT OF THERMOMECHANICAL TREATMENTS ON AGING BEHAVIOR AND FRACTURE TOUGHNESS OF AL-CU-MG ALLOY PLATES USED IN AIRCRAFT STRUCTURE | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 9, Issue 1, Spring 2009, Page 53-67 | ||||
| Dr. Alaa A. Ateia | ||||
| 30 | Effect of Water Absorption on Hardness Property for Epoxy Reinforced by Glass Fibers | |||
| Journal of University of Anbar for Pure Science | ||||
| Volume 5, Issue 3, Autumn 2011, Page 23-28 | ||||
| Faik H. Anter; Hind Salah Hasan | ||||
| 31 | Evaluation of propolis to modify soft denture lining materials, part 1 | |||
| Al-Rafidain Dental Journal | ||||
| Volume 11, Issue 3, Autumn 2011, Page 113-123 | ||||
| Ammar K. AL-Nori; Bassima A. Abdullah; Hamza S. AL-neema | ||||
| 32 | Evaluation of the Effect of silanized Zirconium Oxide nano-fillers and Plasma Treated polypropylene fibers Addition on some Properties of Heat Cured Acrylic Resin Denture Base Material | |||
| MUSTANSIRIA DENTAL JOURNAL | ||||
| Volume 13, Issue 1, Autumn 2016, Page 70-76 | ||||
| B.D.S; Dr. Noor Falah Abdul-Hadi; M.Sc | ||||
| 33 | Evaluation of the Hardness of Cold Cured Acrylic Resin Material by Processing at Different Temperature | |||
| nursing national Iraqi specility | ||||
| Volume 24, Issue 2, Autumn 2011, Page 44-51 | ||||
| Amal A. Rashid | ||||
| 34 | HARDNESS AND FRATURE TOUGHNE OF PLASMA SPRAYED ZIRCONIA-CERIA-YTTRIA THERMAL BARRIER COATINGS | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 18, Issue 2, Autumn 2018, Page 214-228 | ||||
| Mohammed Hliyil Hafiz; Mohammed Jasim Kadhim; Maryam Abduladeem Ali Bash | ||||
| 35 | Hardness Removal from Drinking Water | |||
| Journal of Engineering | ||||
| Volume 12, Issue 2, Spring 2006, Page 405-413 | ||||
| Ahmed A. M. Ali; Nawar O. A. Nasser | ||||
| 36 | IMPROVEMENT HARDNESS AND MICROHARDNESS OF LOW ALLOY STELL BY USING MOLTEN METAL | |||
| DIYALA JOURNAL OF ENGINEERING SCIENCES | ||||
| Volume 8, Issue 4, Autumn 2015, Page 686-691 | ||||
| Ali adwon H | ||||
| 37 | Improving the thermal insulation property of polyester resin | |||
| Journal of Basrah Researches (Sciences) | ||||
| Volume 36, Issue 2, Spring 2010, Page 10-15 | ||||
| Abdul khaliq A. Hasan and Maitham Y. Atshan; Safaa A. S. Almtori | ||||
| 38 | Influence of SOLO disinfectant on some properties of different denture lining materials | |||
| Journal of baghdad college of dentistry | ||||
| Volume 24, Issue 3, Autumn 2012, Page 36-41 | ||||
| Shorouq M. Abass; Reem A. Nassif; Bayan S. Khalaf | ||||
| 39 | Influence of Woven Roving Fiber E-Glass on Electrical Properties of Polyester Composite | |||
| Journal of Al-Nahrain University - Science | ||||
| Volume 16, Issue 3, Summer 2013, Page 124-128 | ||||
| Dana A. Tahir; Gelas M. Jamal; Omed Gh. Abdullah; Estabraq T. Abdullah; Mazin Ali Abd Ali; Miami Abdulatteef Mohammed; Firas Z. Majeed; Awham M. Hameed; Raghad H. Helal; Thamir H. Khalaf; Tagreed K. Hamad; R. S. Al-Khafaji; Nour Mohammedhasan Yaseen; Rasha S. Ameen; Faiz I. Al-Shakarchi; Abdulwahid B. A. Al-Shaibani; Munira CH. Ismail; Sinai Waleed; Khawla Ibrahim; Noor Ulhuda Fakhri; Mohammed Ridha Abdulrasool; Shahlaa M. Salih; Abdulwahid B. Al-Shaibani; Haider Hussain Naser; Shahlaa M. Salih; Abdulwahid B. Al-Shaibani; Afkar M. Hadi; Maitham J. Mohammed; Ehab D. Selman; NiyafNidhal Al Kadhem; Nabeel K. Al Ani; Maria Pasini; Huda H. Omran; Saad Mohsin Salman; Osama H. Mohammed; Omar I. Khaleel; Ban N. Dhanoon; Huda H. Ali | ||||
| 40 | Investigation of Compression and Hardness for UHMWPE Bio-composites as Internal Bone Plate Fixation | |||
| Engineering and Technology Journal | ||||
| Volume 40, Issue 12, Autumn 2022, Page 1783-1794 | ||||
| Tamara R. Kadhim; Jawad K. Oleiwi; Qahtan A. Hamad | ||||
| 41 | Investigation of dual phase (β+γ) CoNiAl MSMA Micro structure effect on the Mechanical Properties and Bio-Corrosion Resistance | |||
| Engineering and Technology Journal | ||||
| Volume 34, Issue 9, Summer 2016, Page 1888-1893 | ||||
| J. A. Al-Hahidary; Sehama E. Salih; P. Mukhopadyiay; M. N. Arbilei | ||||
| 42 | Mechanical and Electrical Behavior of Polymer Matrix Composite and their Hybrids Reinforced with (Carbon Black–Boron) Particles | |||
| Journal of Al-Nahrain University - Science | ||||
| Volume 16, Issue 3, Summer 2013, Page 171-177 | ||||
| R. S. Al-Khafaji | ||||
| 43 | Mechanical and physical properties of carbon nanotubes with Kevlar fiber reinforced with polyester resin | |||
| Iraqi Journal of Physics | ||||
| Volume 14, Issue 31, Autumn 2016, Page 71-80 | ||||
| Aseel Basim Abdul-Hussein; Emad Saadi AL-Hassani; Marwa Subhi Atallah | ||||
| 44 | Mechanical and Physical Properties of Glass Wool-Rigid Polyurethane Foam Composites | |||
| ALNAHRAIN JOURNAL FOR ENGINEERING SCIENCES | ||||
| Volume 18, Issue 1, Spring 2015, Page 41-49 | ||||
| Aseel Kais Rasheed; Ismail Ibrahim Marhoon | ||||
| 45 | Mechanical Properties of Martensitic Stainless Steel (AISI420) Subjected to Conventional and Cryogenic Treatments | |||
| Engineering and Technology Journal | ||||
| Volume 38, Issue 8, Summer 2020, Page 1096-1105 | ||||
| Hareer S. Mohamed; Ali H. Ataiwi; Jamal J. Dawood | ||||
| 46 | Mechanical Properties of The Modified Al-12%Si Alloy Reinforced by Ceramic Particles | |||
| Engineering and Technology Journal | ||||
| Volume 28, Issue 2, Winter 2010, Page 289-300 | ||||
| Haitham Razouqi Saleh | ||||
| 47 | Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment | |||
| Anbar Journal of Engineering Sciences | ||||
| Volume 11, Issue 1, Spring 2020, Page 12-18 | ||||
| J. Jamal; H. Ali; S. Hareer | ||||
| 48 | MODELING THE SURFACE CHARACTERISTICS OF SHOT PEENED 2024 ALUMINUM ALLOY | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 11, Issue 2, Spring 2011, Page 293-302 | ||||
| Hussain J.Mohamed.Al.allkawi; Fatin N.Abdu Allah; Mairb R.Abdul Hassan | ||||
| 49 | Numerical Study of Forced Convection in Wavy and Diverged-Converged Ducts | |||
| Engineering and Technology Journal | ||||
| Volume 27, Issue 7, Spring 2009, Page 1385-1403 | ||||
| Anmar M. Basheer; Sattar J. Habeeb; Waheed S. Mohamad; Qutaiba G. Majeed; Mohammed Y. Fattah; Jawad K.Oleiwi; Mohammed S. Hamza; Mayyadah Sh. Abed; Amjed J. Hamidi; Ahmed Alaa Ogla; Yaser Nabeel Ibrahem | ||||
| 50 | OPTIMIZATION of Al-BASE COMPOSITE USING GENETIC ALGORITHM | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 15, Issue 4, Autumn 2015, Page 245-255 | ||||
| Haydar A.H. al- Jubouri; Haydar A.H.Al-Ethari; Shahad Ali Hammood | ||||
| 51 | Performance Evaluation of Electrocoagulation Technique for Removing Groundwater Hardness of Tikrit University | |||
| Engineering and Technology Journal | ||||
| Volume 30, Issue 18, Autumn 2012, Page 3268-3279 | ||||
| Maha I Alali | ||||
| 52 | Push-out bond strength and apical microleakage of (MTA Plus, Biodentine, and Bioceramic) as apical third filling (An in vitro study) | |||
| MUSTANSIRIA DENTAL JOURNAL | ||||
| Volume 13, Issue 1, Autumn 2016, Page 1-10 | ||||
| Dr. Abeer A. Abass B.D.S; M.Sc; Prof. Dr. Jamal A. Mehdi B.D.S | ||||
| 53 | Re-Use of Glass Wool Fiber as New Composite Polyester System | |||
| Engineering and Technology Journal | ||||
| Volume 36, 1B, Winter 2018, Page 7-11 | ||||
| Raghad U. Abass | ||||
| 54 | Study Compression, Hardness and Density properties of PMMA Reinforced by Natural Powder Used in Denture Base applications | |||
| Engineering and Technology Journal | ||||
| Volume 37, 12A, Autumn 2019, Page 522-527 | ||||
| Jawad Oleiwi; Q. A. Hamad; N. N. Kadhim | ||||
| 55 | Studying Some Of Mechanical properties Of (sawdust/Un Saturated Polyester) Composite in salt solution | |||
| Engineering and Technology Journal | ||||
| Volume 28, Issue 16, Summer 2010, Page 5238-5245 | ||||
| Sanaa A. A. Hafad | ||||
| 56 | Studying Wear Behavior of Ni-Ti- Ag Shape Memory Alloy Synthesized by P/T | |||
| Engineering and Technology Journal | ||||
| Volume 38, Issue 6, Spring 2020, Page 846-853 | ||||
| Suad A. Shihab; Khansaa D. Salman; Laith J. Saud | ||||
| 57 | Study of some Mechanical Properties and Erosive Behavior by Taguchi Method for Hybrid Nano Composites | |||
| Engineering and Technology Journal | ||||
| Volume 36, 4A, Spring 2018, Page 471-479 | ||||
| Reem Mohammed | ||||
| 58 | Study of the Diffusion Coefficient and Hardness for a Composite Material when Immersed in Different Solutions Polymer | |||
| Engineering and Technology Journal | ||||
| Volume 35, Issue 1C, Winter 2017, Page 191-196 | ||||
| S.H. Aleabi; H.G. Attiya; A.W. Watan | ||||
| 59 | Study the Effect of Coupling Agents (Polyvinyl alcohol) and (Lignin) on Mechanical Properties for Polymer Composite Materials | |||
| Engineering and Technology Journal | ||||
| Volume 34, Issue 2, Winter 2016, Page 26-34 | ||||
| Balkees Mohammed Diaa | ||||
| 60 | Study the Effect of Welding Heat Input on the Microstructure, Hardness, and Impact Toughness of AISI 1015 Steel | |||
| Al-Khwarizmi Engineering Journal | ||||
| Volume 14, Issue 1, Spring 2018, Page 118-127 | ||||
| Ihsan Khalaf Irthiea; Abbas Sh. Alwan; Emad Kh. Hamd | ||||
| 61 | Study the Mechanical and Physical Properties of Polyester Composite Reinforced by Multi Layers | |||
| Engineering and Technology Journal | ||||
| Volume 34, Issue 9, Summer 2016, Page 1834-1843 | ||||
| Fadhil Abbas Hashim; Mohammed Sellab Hamza; Reham Raad Abdulla | ||||
| 62 | Study the Microstructure and Mechanical Properties of High Chromium White Cast Iron (HCWCI) under Different Martempering Quenching Mediums | |||
| Engineering and Technology Journal | ||||
| Volume 37, 4A, Spring 2019, Page 112-119 | ||||
| Ali H. Ataiwi; Zainab A. Betti | ||||
| 63 | Study the quality of ground water in Kirkuk city | |||
| Kirkuk University Journal-Scientific Studies | ||||
| Volume 10, Issue 4, Autumn 2015, Page 177-194 | ||||
| Shno M. Ali Muhammad | ||||
| 64 | Temperature Effect on the Hardness of Different types of Resin Denture Base Materials | |||
| MUSTANSIRIA DENTAL JOURNAL | ||||
| Volume 10, Issue 1, Spring 2013, Page 69-76 | ||||
| Dr. Amal Abdul-Latif Rashid; M.Sc. Preventive Dentistry; Lecturer | ||||
| 65 | THE CORROSION BEHAVIOR AND WEAR RESISTANCE OF GRAY CAST IRON | |||
| KUFA JOURNAL OF ENGINEERING | ||||
| Volume 9, Issue 1, Spring 2018, Page 118-132 | ||||
| Lina F. Kadhim | ||||
| 66 | The Effective of Pressure and Sintering Temperature for Hardness Characteristics of Shape Memory Alloy by Using Taguchi Technique | |||
| Journal of Engineering | ||||
| Volume 22, Issue 1, Winter 2016, Page 159-171 | ||||
| Ahmed Abdulrusool; Sarah Jalal Mosa | ||||
| 67 | The Effect of Different Beverage Solutions on the Hardness of Different Acrylic Denture Teeth | |||
| Al-Rafidain Dental Journal | ||||
| Volume 13, Issue 3, Autumn 2013, Page 493-500 | ||||
| Ahmad W Alubaidi | ||||
| 68 | The effect of glass flakes reinforcement on the surface hardness and surface roughness of heat-cured poly (methyl methacrylate) denture base material | |||
| Journal of baghdad college of dentistry | ||||
| Volume 27, Issue 2, Spring 2015, Page 6-10 | ||||
| Haitham T. Abdulrazzaq; Mohammed MM. Ali | ||||
| 69 | THE EFFECT OF HEAT TREATMENT TEMPERATURES (ANNEALING, AGING AND DOUBLE AGING) ON HARDNESS OF 16%NI CAST MARAGING STEELS | |||
| Iraqi journal of mechanical and material engineering | ||||
| Volume 11, Issue 2, Spring 2011, Page 333-343 | ||||
| MUNTHIR MOHAMMED RADHY | ||||
| 70 | The effect of in office bleaching on surface roughness and micro-hardness of newly developed composite materials (In vitro study) | |||
| Journal of baghdad college of dentistry | ||||
| Volume 26, Issue 2, Spring 2014, Page 24-29 | ||||
| Noor S. Nadhum; Ali H. Al-Khafaji | ||||
| 71 | The Effect of Mold Rotational Speed on Mechanical Properties of Functionally Graded Polymeric Matrix Composites | |||
| Al-Rafidain Engineering Journal (AREJ) | ||||
| Volume 23, Issue 2, Spring 2015, Page 1-12 | ||||
| Ahmed Akram Abdullah; Awad Hallosh Khidhir | ||||
| 72 | The Effect of PVP Addition on the Mechanical Properties Of [84%LLDPE: 15 %(( 100- X) %PP: X%PVP):1%Basalt Particle] Polymer Blend Composites. | |||
| Engineering and Technology Journal | ||||
| Volume 32, Issue 3, Winter 2014, Page 573-585 | ||||
| Teeb A. Mohammed; Akram R. Jabur; Sihama E. salih | ||||
| 73 | The effect of the addition of silanated poly propylene fiber to polymethylmethacrylate denture base material on some of its mechanical properties | |||
| Journal of baghdad college of dentistry | ||||
| Volume 27, Issue 1, Winter 2015, Page 40-47 | ||||
| Intisar J. Ismaeel; Hasanain K.A. Alalwan; Mustafa M.J | ||||
| 74 | THE IMPACT OF ADDING COPPER TO ALUMINUM ON MICROSTRUCTURE AND HARDNESS | |||
| Al-Qadisiyah Journal for Engineering Sciences | ||||
| Volume 8, Issue 4, Autumn 2015, Page 569-578 | ||||
| Nawzad J. Mahmood | ||||
| 75 | The Influence of Design and Technological Parameters on the MAF Process | |||
| Al-Khwarizmi Engineering Journal | ||||
| Volume 11, Issue 4, Autumn 2015, Page 82-88 | ||||
| Saad kariem Shather; Shakir M. Mousa | ||||
| 76 | THE INFLUENCE OF LOW COST FILLER ON SOME MECHANICAL AND PHYSICAL PROPERTIES OF A POLYMER MATRIX COMPOSITE | |||
| Al-Qadisiyah Journal for Engineering Sciences | ||||
| Volume 10, Issue 1, Winter 2017, Page 1-10 | ||||
| Orhan Sabah Abdullah | ||||
| 77 | The Mechanical Properties of Aluminum Matrix Composites | |||
| Engineering and Technology Journal | ||||
| Volume 27, Issue 15, Autumn 2009, Page 517-523 | ||||
| 78 | Using of Taguchi Method to Optimize the Casting of Al–Si /Al2O3 Composites | |||
| Engineering and Technology Journal | ||||
| Volume 27, Issue 6, Spring 2009, Page 1143-1150 | ||||
| Osama S. Muhammed; Haitham R. Saleh; Hussam L. Alwan | ||||